bogdan/zira-etc
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

daily autocommit

Browse Source
This commit is contained in:
Bogdan Stoica
2023-06-24 11:25:47 +03:00
parent 9b764da8f5
commit 43d4d203a1
106 changed files with 6 additions and 697995 deletions
Download Patch File Download Diff File Expand all files Collapse all files

127
dovecot/conf.d/10-auth.conf.rpmnew
View File

@@ -1,127 +0,0 @@
##
## Authentication processes
##
# Disable LOGIN command and all other plaintext authentications unless
# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP
# matches the local IP (ie. you're connecting from the same computer), the
# connection is considered secure and plaintext authentication is allowed.
# See also ssl=required setting.
#disable_plaintext_auth = yes
# Authentication cache size (e.g. 10M). 0 means it's disabled. Note that
# bsdauth and PAM require cache_key to be set for caching to be used.
#auth_cache_size = 0
# Time to live for cached data. After TTL expires the cached record is no
# longer used, *except* if the main database lookup returns internal failure.
# We also try to handle password changes automatically: If user's previous
# authentication was successful, but this one wasn't, the cache isn't used.
# For now this works only with plaintext authentication.
#auth_cache_ttl = 1 hour
# TTL for negative hits (user not found, password mismatch).
# 0 disables caching them completely.
#auth_cache_negative_ttl = 1 hour
# Space separated list of realms for SASL authentication mechanisms that need
# them. You can leave it empty if you don't want to support multiple realms.
# Many clients simply use the first one listed here, so keep the default realm
# first.
#auth_realms =
# Default realm/domain to use if none was specified. This is used for both
# SASL realms and appending @domain to username in plaintext logins.
#auth_default_realm =
# List of allowed characters in username. If the user-given username contains
# a character not listed in here, the login automatically fails. This is just
# an extra check to make sure user can't exploit any potential quote escaping
# vulnerabilities with SQL/LDAP databases. If you want to allow all characters,
# set this value to empty.
#auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@
# Username character translations before it's looked up from databases. The
# value contains series of from -> to characters. For example "#@/@" means
# that '#' and '/' characters are translated to '@'.
#auth_username_translation =
# Username formatting before it's looked up from databases. You can use
# the standard variables here, eg. %Lu would lowercase the username, %n would
# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into
# "-AT-". This translation is done after auth_username_translation changes.
#auth_username_format = %Lu
# If you want to allow master users to log in by specifying the master
# username within the normal username string (ie. not using SASL mechanism's
# support for it), you can specify the separator character here. The format
# is then <username><separator><master username>. UW-IMAP uses "*" as the
# separator, so that could be a good choice.
#auth_master_user_separator =
# Username to use for users logging in with ANONYMOUS SASL mechanism
#auth_anonymous_username = anonymous
# Maximum number of dovecot-auth worker processes. They're used to execute
# blocking passdb and userdb queries (eg. MySQL and PAM). They're
# automatically created and destroyed as needed.
#auth_worker_max_count = 30
# Host name to use in GSSAPI principal names. The default is to use the
# name returned by gethostname(). Use "$ALL" (with quotes) to allow all keytab
# entries.
#auth_gssapi_hostname =
# Kerberos keytab to use for the GSSAPI mechanism. Will use the system
# default (usually /etc/krb5.keytab) if not specified. You may need to change
# the auth service to run as root to be able to read this file.
#auth_krb5_keytab =
# Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and
# ntlm_auth helper. <doc/wiki/Authentication/Mechanisms/Winbind.txt>
#auth_use_winbind = no
# Path for Samba's ntlm_auth helper binary.
#auth_winbind_helper_path = /usr/bin/ntlm_auth
# Time to delay before replying to failed authentications.
#auth_failure_delay = 2 secs
# Require a valid SSL client certificate or the authentication fails.
#auth_ssl_require_client_cert = no
# Take the username from client's SSL certificate, using
# X509_NAME_get_text_by_NID() which returns the subject's DN's
# CommonName.
#auth_ssl_username_from_cert = no
# Space separated list of wanted authentication mechanisms:
# plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp
# gss-spnego
# NOTE: See also disable_plaintext_auth setting.
auth_mechanisms = plain
##
## Password and user databases
##
#
# Password database is used to verify user's password (and nothing more).
# You can have multiple passdbs and userdbs. This is useful if you want to
# allow both system users (/etc/passwd) and virtual users to login without
# duplicating the system users into virtual database.
#
# <doc/wiki/PasswordDatabase.txt>
#
# User database specifies where mails are located and what user/group IDs
# own them. For single-UID configuration use "static" userdb.
#
# <doc/wiki/UserDatabase.txt>
#!include auth-deny.conf.ext
#!include auth-master.conf.ext
!include auth-system.conf.ext
#!include auth-sql.conf.ext
#!include auth-ldap.conf.ext
#!include auth-passwdfile.conf.ext
#!include auth-checkpassword.conf.ext
#!include auth-static.conf.ext

105
dovecot/conf.d/10-logging.conf.rpmnew
View File

@@ -1,105 +0,0 @@
##
## Log destination.
##
# Log file to use for error messages. "syslog" logs to syslog,
# /dev/stderr logs to stderr.
#log_path = syslog
# Log file to use for informational messages. Defaults to log_path.
#info_log_path =
# Log file to use for debug messages. Defaults to info_log_path.
#debug_log_path =
# Syslog facility to use if you're logging to syslog. Usually if you don't
# want to use "mail", you'll use local0..local7. Also other standard
# facilities are supported.
#syslog_facility = mail
##
## Logging verbosity and debugging.
##
# Log filter is a space-separated list conditions. If any of the conditions
# match, the log filter matches (i.e. they're ORed together). Parenthesis
# are supported if multiple conditions need to be matched together.
#
# See https://doc.dovecot.org/configuration_manual/event_filter/ for details.
#
# For example: event=http_request_* AND category=error AND category=storage
#
# Filter to specify what debug logging to enable. This will eventually replace
# mail_debug and auth_debug settings.
#log_debug =
# Crash after logging a matching event. For example category=error will crash
# any time an error is logged, which can be useful for debugging.
#log_core_filter =
# Log unsuccessful authentication attempts and the reasons why they failed.
#auth_verbose = no
# In case of password mismatches, log the attempted password. Valid values are
# no, plain and sha1. sha1 can be useful for detecting brute force password
# attempts vs. user simply trying the same password over and over again.
# You can also truncate the value to n chars by appending ":n" (e.g. sha1:6).
#auth_verbose_passwords = no
# Even more verbose logging for debugging purposes. Shows for example SQL
# queries.
#auth_debug = no
# In case of password mismatches, log the passwords and used scheme so the
# problem can be debugged. Enabling this also enables auth_debug.
#auth_debug_passwords = no
# Enable mail process debugging. This can help you figure out why Dovecot
# isn't finding your mails.
#mail_debug = no
# Show protocol level SSL errors.
#verbose_ssl = no
# mail_log plugin provides more event logging for mail processes.
plugin {
# Events to log. Also available: flag_change append
#mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename
# Available fields: uid, box, msgid, from, subject, size, vsize, flags
# size and vsize are available only for expunge and copy events.
#mail_log_fields = uid box msgid size
}
##
## Log formatting.
##
# Prefix for each line written to log file. % codes are in strftime(3)
# format.
#log_timestamp = "%b %d %H:%M:%S "
# Space-separated list of elements we want to log. The elements which have
# a non-empty variable value are joined together to form a comma-separated
# string.
#login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c
# Login log format. %s contains login_log_format_elements string, %$ contains
# the data we want to log.
#login_log_format = %$: %s
# Log prefix for mail processes. See doc/wiki/Variables.txt for list of
# possible variables you can use.
#mail_log_prefix = "%s(%u)<%{pid}><%{session}>: "
# Format to use for logging mail deliveries:
# %$ - Delivery status message (e.g. "saved to INBOX")
# %m / %{msgid} - Message-ID
# %s / %{subject} - Subject
# %f / %{from} - From address
# %p / %{size} - Physical size
# %w / %{vsize} - Virtual size
# %e / %{from_envelope} - MAIL FROM envelope
# %{to_envelope} - RCPT TO envelope
# %{delivery_time} - How many milliseconds it took to deliver the mail
# %{session_time} - How long LMTP session took, not including delivery_time
# %{storage_id} - Backend-specific ID for mail, e.g. Maildir filename
#deliver_log_format = msgid=%m: %$

416
dovecot/conf.d/10-mail.conf.rpmnew
View File

@@ -1,416 +0,0 @@
##
## Mailbox locations and namespaces
##
# Location for users' mailboxes. The default is empty, which means that Dovecot
# tries to find the mailboxes automatically. This won't work if the user
# doesn't yet have any mail, so you should explicitly tell Dovecot the full
# location.
#
# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u)
# isn't enough. You'll also need to tell Dovecot where the other mailboxes are
# kept. This is called the "root mail directory", and it must be the first
# path given in the mail_location setting.
#
# There are a few special variables you can use, eg.:
#
# %u - username
# %n - user part in user@domain, same as %u if there's no domain
# %d - domain part in user@domain, empty if there's no domain
# %h - home directory
#
# See doc/wiki/Variables.txt for full list. Some examples:
#
# mail_location = maildir:~/Maildir
# mail_location = mbox:~/mail:INBOX=/var/mail/%u
# mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n
#
# <doc/wiki/MailLocation.txt>
#
#mail_location =
# If you need to set multiple mailbox locations or want to change default
# namespace settings, you can do it by defining namespace sections.
#
# You can have private, shared and public namespaces. Private namespaces
# are for user's personal mails. Shared namespaces are for accessing other
# users' mailboxes that have been shared. Public namespaces are for shared
# mailboxes that are managed by sysadmin. If you create any shared or public
# namespaces you'll typically want to enable ACL plugin also, otherwise all
# users can access all the shared mailboxes, assuming they have permissions
# on filesystem level to do so.
namespace inbox {
# Namespace type: private, shared or public
#type = private
# Hierarchy separator to use. You should use the same separator for all
# namespaces or some clients get confused. '/' is usually a good one.
# The default however depends on the underlying mail storage format.
#separator =
# Prefix required to access this namespace. This needs to be different for
# all namespaces. For example "Public/".
#prefix =
# Physical location of the mailbox. This is in same format as
# mail_location, which is also the default for it.
#location =
# There can be only one INBOX, and this setting defines which namespace
# has it.
inbox = yes
# If namespace is hidden, it's not advertised to clients via NAMESPACE
# extension. You'll most likely also want to set list=no. This is mostly
# useful when converting from another server with different namespaces which
# you want to deprecate but still keep working. For example you can create
# hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/".
#hidden = no
# Show the mailboxes under this namespace with LIST command. This makes the
# namespace visible for clients that don't support NAMESPACE extension.
# "children" value lists child mailboxes, but hides the namespace prefix.
#list = yes
# Namespace handles its own subscriptions. If set to "no", the parent
# namespace handles them (empty prefix should always have this as "yes")
#subscriptions = yes
# See 15-mailboxes.conf for definitions of special mailboxes.
}
# Example shared namespace configuration
#namespace {
#type = shared
#separator = /
# Mailboxes are visible under "shared/user@domain/"
# %%n, %%d and %%u are expanded to the destination user.
#prefix = shared/%%u/
# Mail location for other users' mailboxes. Note that %variables and ~/
# expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the
# destination user's data.
#location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u
# Use the default namespace for saving subscriptions.
#subscriptions = no
# List the shared/ namespace only if there are visible shared mailboxes.
#list = children
#}
# Should shared INBOX be visible as "shared/user" or "shared/user/INBOX"?
#mail_shared_explicit_inbox = no
# System user and group used to access mails. If you use multiple, userdb
# can override these by returning uid or gid fields. You can use either numbers
# or names. <doc/wiki/UserIds.txt>
#mail_uid =
#mail_gid =
# Group to enable temporarily for privileged operations. Currently this is
# used only with INBOX when either its initial creation or dotlocking fails.
# Typically this is set to "mail" to give access to /var/mail.
#mail_privileged_group =
# Grant access to these supplementary groups for mail processes. Typically
# these are used to set up access to shared mailboxes. Note that it may be
# dangerous to set these if users can create symlinks (e.g. if "mail" group is
# set here, ln -s /var/mail ~/mail/var could allow a user to delete others'
# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it).
#mail_access_groups =
# Allow full filesystem access to clients. There's no access checks other than
# what the operating system does for the active UID/GID. It works with both
# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/
# or ~user/.
#mail_full_filesystem_access = no
# Dictionary for key=value mailbox attributes. This is used for example by
# URLAUTH and METADATA extensions.
#mail_attribute_dict =
# A comment or note that is associated with the server. This value is
# accessible for authenticated users through the IMAP METADATA server
# entry "/shared/comment".
#mail_server_comment = ""
# Indicates a method for contacting the server administrator. According to
# RFC 5464, this value MUST be a URI (e.g., a mailto: or tel: URL), but that
# is currently not enforced. Use for example mailto:admin@example.com. This
# value is accessible for authenticated users through the IMAP METADATA server
# entry "/shared/admin".
#mail_server_admin =
##
## Mail processes
##
# Don't use mmap() at all. This is required if you store indexes to shared
# filesystems (NFS or clustered filesystem).
#mmap_disable = no
# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL
# since version 3, so this should be safe to use nowadays by default.
#dotlock_use_excl = yes
# When to use fsync() or fdatasync() calls:
# optimized (default): Whenever necessary to avoid losing important data
# always: Useful with e.g. NFS when write()s are delayed
# never: Never use it (best performance, but crashes can lose data)
#mail_fsync = optimized
# Locking method for index files. Alternatives are fcntl, flock and dotlock.
# Dotlocking uses some tricks which may create more disk I/O than other locking
# methods. NFS users: flock doesn't work, remember to change mmap_disable.
#lock_method = fcntl
# Directory where mails can be temporarily stored. Usually it's used only for
# mails larger than >= 128 kB. It's used by various parts of Dovecot, for
# example LDA/LMTP while delivering large mails or zlib plugin for keeping
# uncompressed mails.
#mail_temp_dir = /tmp
# Valid UID range for users, defaults to 500 and above. This is mostly
# to make sure that users can't log in as daemons or other system users.
# Note that denying root logins is hardcoded to dovecot binary and can't
# be done even if first_valid_uid is set to 0.
first_valid_uid = 1000
#last_valid_uid = 0
# Valid GID range for users, defaults to non-root/wheel. Users having
# non-valid GID as primary group ID aren't allowed to log in. If user
# belongs to supplementary groups with non-valid GIDs, those groups are
# not set.
#first_valid_gid = 1
#last_valid_gid = 0
# Maximum allowed length for mail keyword name. It's only forced when trying
# to create new keywords.
#mail_max_keyword_length = 50
# ':' separated list of directories under which chrooting is allowed for mail
# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too).
# This setting doesn't affect login_chroot, mail_chroot or auth chroot
# settings. If this setting is empty, "/./" in home dirs are ignored.
# WARNING: Never add directories here which local users can modify, that
# may lead to root exploit. Usually this should be done only if you don't
# allow shell access for users. <doc/wiki/Chrooting.txt>
#valid_chroot_dirs =
# Default chroot directory for mail processes. This can be overridden for
# specific users in user database by giving /./ in user's home directory
# (eg. /home/./user chroots into /home). Note that usually there is no real
# need to do chrooting, Dovecot doesn't allow users to access files outside
# their mail directory anyway. If your home directories are prefixed with
# the chroot directory, append "/." to mail_chroot. <doc/wiki/Chrooting.txt>
#mail_chroot =
# UNIX socket path to master authentication server to find users.
# This is used by imap (for shared users) and lda.
#auth_socket_path = /var/run/dovecot/auth-userdb
# Directory where to look up mail plugins.
#mail_plugin_dir = /usr/lib/dovecot
# Space separated list of plugins to load for all services. Plugins specific to
# IMAP, LDA, etc. are added to this list in their own .conf files.
#mail_plugins =
##
## Mailbox handling optimizations
##
# Mailbox list indexes can be used to optimize IMAP STATUS commands. They are
# also required for IMAP NOTIFY extension to be enabled.
#mailbox_list_index = yes
# Trust mailbox list index to be up-to-date. This reduces disk I/O at the cost
# of potentially returning out-of-date results after e.g. server crashes.
# The results will be automatically fixed once the folders are opened.
#mailbox_list_index_very_dirty_syncs = yes
# Should INBOX be kept up-to-date in the mailbox list index? By default it's
# not, because most of the mailbox accesses will open INBOX anyway.
#mailbox_list_index_include_inbox = no
# The minimum number of mails in a mailbox before updates are done to cache
# file. This allows optimizing Dovecot's behavior to do less disk writes at
# the cost of more disk reads.
#mail_cache_min_mail_count = 0
# When IDLE command is running, mailbox is checked once in a while to see if
# there are any new mails or other changes. This setting defines the minimum
# time to wait between those checks. Dovecot can also use inotify and
# kqueue to find out immediately when changes occur.
#mailbox_idle_check_interval = 30 secs
# Save mails with CR+LF instead of plain LF. This makes sending those mails
# take less CPU, especially with sendfile() syscall with Linux and FreeBSD.
# But it also creates a bit more disk I/O which may just make it slower.
# Also note that if other software reads the mboxes/maildirs, they may handle
# the extra CRs wrong and cause problems.
#mail_save_crlf = no
# Max number of mails to keep open and prefetch to memory. This only works with
# some mailbox formats and/or operating systems.
#mail_prefetch_count = 0
# How often to scan for stale temporary files and delete them (0 = never).
# These should exist only after Dovecot dies in the middle of saving mails.
#mail_temp_scan_interval = 1w
# How many slow mail accesses sorting can perform before it returns failure.
# With IMAP the reply is: NO [LIMIT] Requested sort would have taken too long.
# The untagged SORT reply is still returned, but it's likely not correct.
#mail_sort_max_read_count = 0
protocol !indexer-worker {
# If folder vsize calculation requires opening more than this many mails from
# disk (i.e. mail sizes aren't in cache already), return failure and finish
# the calculation via indexer process. Disabled by default. This setting must
# be 0 for indexer-worker processes.
#mail_vsize_bg_after_count = 0
}
##
## Maildir-specific settings
##
# By default LIST command returns all entries in maildir beginning with a dot.
# Enabling this option makes Dovecot return only entries which are directories.
# This is done by stat()ing each entry, so it causes more disk I/O.
# (For systems setting struct dirent->d_type, this check is free and it's
# done always regardless of this setting)
#maildir_stat_dirs = no
# When copying a message, do it with hard links whenever possible. This makes
# the performance much better, and it's unlikely to have any side effects.
#maildir_copy_with_hardlinks = yes
# Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only
# when its mtime changes unexpectedly or when we can't find the mail otherwise.
#maildir_very_dirty_syncs = no
# If enabled, Dovecot doesn't use the S=<size> in the Maildir filenames for
# getting the mail's physical size, except when recalculating Maildir++ quota.
# This can be useful in systems where a lot of the Maildir filenames have a
# broken size. The performance hit for enabling this is very small.
#maildir_broken_filename_sizes = no
# Always move mails from new/ directory to cur/, even when the \Recent flags
# aren't being reset.
#maildir_empty_new = no
##
## mbox-specific settings
##
# Which locking methods to use for locking mbox. There are four available:
# dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe
# solution. If you want to use /var/mail/ like directory, the users
# will need write access to that directory.
# dotlock_try: Same as dotlock, but if it fails because of permissions or
# because there isn't enough disk space, just skip it.
# fcntl : Use this if possible. Works with NFS too if lockd is used.
# flock : May not exist in all systems. Doesn't work with NFS.
# lockf : May not exist in all systems. Doesn't work with NFS.
#
# You can use multiple locking methods; if you do the order they're declared
# in is important to avoid deadlocks if other MTAs/MUAs are using multiple
# locking methods as well. Some operating systems don't allow using some of
# them simultaneously.
#mbox_read_locks = fcntl
#mbox_write_locks = dotlock fcntl
mbox_write_locks = fcntl
# Maximum time to wait for lock (all of them) before aborting.
#mbox_lock_timeout = 5 mins
# If dotlock exists but the mailbox isn't modified in any way, override the
# lock file after this much time.
#mbox_dotlock_change_timeout = 2 mins
# When mbox changes unexpectedly we have to fully read it to find out what
# changed. If the mbox is large this can take a long time. Since the change
# is usually just a newly appended mail, it'd be faster to simply read the
# new mails. If this setting is enabled, Dovecot does this but still safely
# fallbacks to re-reading the whole mbox file whenever something in mbox isn't
# how it's expected to be. The only real downside to this setting is that if
# some other MUA changes message flags, Dovecot doesn't notice it immediately.
# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK
# commands.
#mbox_dirty_syncs = yes
# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE,
# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored.
#mbox_very_dirty_syncs = no
# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK
# commands and when closing the mailbox). This is especially useful for POP3
# where clients often delete all mails. The downside is that our changes
# aren't immediately visible to other MUAs.
#mbox_lazy_writes = yes
# If mbox size is smaller than this (e.g. 100k), don't write index files.
# If an index file already exists it's still read, just not updated.
#mbox_min_index_size = 0
# Mail header selection algorithm to use for MD5 POP3 UIDLs when
# pop3_uidl_format=%m. For backwards compatibility we use apop3d inspired
# algorithm, but it fails if the first Received: header isn't unique in all
# mails. An alternative algorithm is "all" that selects all headers.
#mbox_md5 = apop3d
##
## mdbox-specific settings
##
# Maximum dbox file size until it's rotated.
#mdbox_rotate_size = 10M
# Maximum dbox file age until it's rotated. Typically in days. Day begins
# from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled.
#mdbox_rotate_interval = 0
# When creating new mdbox files, immediately preallocate their size to
# mdbox_rotate_size. This setting currently works only in Linux with some
# filesystems (ext4, xfs).
#mdbox_preallocate_space = no
##
## Mail attachments
##
# sdbox and mdbox support saving mail attachments to external files, which
# also allows single instance storage for them. Other backends don't support
# this for now.
# Directory root where to store mail attachments. Disabled, if empty.
#mail_attachment_dir =
# Attachments smaller than this aren't saved externally. It's also possible to
# write a plugin to disable saving specific attachments externally.
#mail_attachment_min_size = 128k
# Filesystem backend to use for saving attachments:
# posix : No SiS done by Dovecot (but this might help FS's own deduplication)
# sis posix : SiS with immediate byte-by-byte comparison during saving
# sis-queue posix : SiS with delayed comparison and deduplication
#mail_attachment_fs = sis posix
# Hash format to use in attachment filenames. You can add any text and
# variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}.
# Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits
#mail_attachment_hash = %{sha1}
# Settings to control adding $HasAttachment or $HasNoAttachment keywords.
# By default, all MIME parts with Content-Disposition=attachment, or inlines
# with filename parameter are consired attachments.
# add-flags - Add the keywords when saving new mails or when fetching can
# do it efficiently.
# content-type=type or !type - Include/exclude content type. Excluding will
# never consider the matched MIME part as attachment. Including will only
# negate an exclusion (e.g. content-type=!foo/* content-type=foo/bar).
# exclude-inlined - Exclude any Content-Disposition=inline MIME part.
#mail_attachment_detection_options =

85
dovecot/conf.d/10-ssl.conf.rpmnew
View File

@@ -1,85 +0,0 @@
##
## SSL settings
##
# SSL/TLS support: yes, no, required. <doc/wiki/SSL.txt>
# disable plain pop3 and imap, allowed are only pop3+TLS, pop3s, imap+TLS and imaps
# plain imap and pop3 are still allowed for local connections
ssl = required
# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
# dropping root privileges, so keep the key file unreadable by anyone but
# root. Included doc/mkcert.sh can be used to easily generate self-signed
# certificate, just make sure to update the domains in dovecot-openssl.cnf
ssl_cert = </etc/pki/dovecot/certs/dovecot.pem
ssl_key = </etc/pki/dovecot/private/dovecot.pem
# If key file is password protected, give the password here. Alternatively
# give it when starting dovecot with -p parameter. Since this file is often
# world-readable, you may want to place this setting instead to a different
# root owned 0600 file by using ssl_key_password = <path.
#ssl_key_password =
# PEM encoded trusted certificate authority. Set this only if you intend to use
# ssl_verify_client_cert=yes. The file should contain the CA certificate(s)
# followed by the matching CRL(s). (e.g. ssl_ca = </etc/pki/dovecot/certs/ca.pem)
#ssl_ca =
# Require that CRL check succeeds for client certificates.
#ssl_require_crl = yes
# Directory and/or file for trusted SSL CA certificates. These are used only
# when Dovecot needs to act as an SSL client (e.g. imapc backend or
# submission service). The directory is usually /etc/pki/dovecot/certs in
# Debian-based systems and the file is /etc/pki/tls/cert.pem in
# RedHat-based systems. Note that ssl_client_ca_file isn't recommended with
# large CA bundles, because it leads to excessive memory usage.
#ssl_client_ca_dir =
#ssl_client_ca_file =
# Require valid cert when connecting to a remote server
#ssl_client_require_valid_cert = yes
# Request client to send a certificate. If you also want to require it, set
# auth_ssl_require_client_cert=yes in auth section.
#ssl_verify_client_cert = no
# Which field from certificate to use for username. commonName and
# x500UniqueIdentifier are the usual choices. You'll also need to set
# auth_ssl_username_from_cert=yes.
#ssl_cert_username_field = commonName
# SSL DH parameters
# Generate new params with `openssl dhparam -out /etc/dovecot/dh.pem 4096`
# Or migrate from old ssl-parameters.dat file with the command dovecot
# gives on startup when ssl_dh is unset.
#ssl_dh = </etc/dovecot/dh.pem
# Minimum SSL protocol version to use. Potentially recognized values are SSLv3,
# TLSv1, TLSv1.1, TLSv1.2 and TLSv1.3, depending on the OpenSSL version used.
#
# Dovecot also recognizes values ANY and LATEST. ANY matches with any protocol
# version, and LATEST matches with the latest version supported by library.
#ssl_min_protocol = TLSv1.2
# SSL ciphers to use, the default is:
#ssl_cipher_list = ALL:!kRSA:!SRP:!kDHd:!DSS:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK:!RC4:!ADH:!LOW@STRENGTH
# To disable non-EC DH, use:
#ssl_cipher_list = ALL:!DH:!kRSA:!SRP:!kDHd:!DSS:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK:!RC4:!ADH:!LOW@STRENGTH
ssl_cipher_list = PROFILE=SYSTEM
# Colon separated list of elliptic curves to use. Empty value (the default)
# means use the defaults from the SSL library. P-521:P-384:P-256 would be an
# example of a valid value.
#ssl_curve_list =
# Prefer the server's order of ciphers over client's.
#ssl_prefer_server_ciphers = no
# SSL crypto device to use, for valid values run "openssl engine"
#ssl_crypto_device =
# SSL extra options. Currently supported options are:
# compression - Enable compression.
# no_ticket - Disable SSL session tickets.
#ssl_options =

86
dovecot/conf.d/15-mailboxes.conf.rpmnew
View File

@@ -1,86 +0,0 @@
##
## Mailbox definitions
##
# Each mailbox is specified in a separate mailbox section. The section name
# specifies the mailbox name. If it has spaces, you can put the name
# "in quotes". These sections can contain the following mailbox settings:
#
# auto:
# Indicates whether the mailbox with this name is automatically created
# implicitly when it is first accessed. The user can also be automatically
# subscribed to the mailbox after creation. The following values are
# defined for this setting:
#
# no - Never created automatically.
# create - Automatically created, but no automatic subscription.
# subscribe - Automatically created and subscribed.
#
# special_use:
# A space-separated list of SPECIAL-USE flags (RFC 6154) to use for the
# mailbox. There are no validity checks, so you could specify anything
# you want in here, but it's not a good idea to use flags other than the
# standard ones specified in the RFC:
#
# \All - This (virtual) mailbox presents all messages in the
# user's message store.
# \Archive - This mailbox is used to archive messages.
# \Drafts - This mailbox is used to hold draft messages.
# \Flagged - This (virtual) mailbox presents all messages in the
# user's message store marked with the IMAP \Flagged flag.
# \Important - This (virtual) mailbox presents all messages in the
# user's message store deemed important to user.
# \Junk - This mailbox is where messages deemed to be junk mail
# are held.
# \Sent - This mailbox is used to hold copies of messages that
# have been sent.
# \Trash - This mailbox is used to hold messages that have been
# deleted.
#
# comment:
# Defines a default comment or note associated with the mailbox. This
# value is accessible through the IMAP METADATA mailbox entries
# "/shared/comment" and "/private/comment". Users with sufficient
# privileges can override the default value for entries with a custom
# value.
# NOTE: Assumes "namespace inbox" has been defined in 10-mail.conf.
namespace inbox {
# These mailboxes are widely used and could perhaps be created automatically:
mailbox Drafts {
special_use = \Drafts
}
mailbox Junk {
special_use = \Junk
}
mailbox Trash {
special_use = \Trash
}
# For \Sent mailboxes there are two widely used names. We'll mark both of
# them as \Sent. User typically deletes one of them if duplicates are created.
mailbox Sent {
special_use = \Sent
}
mailbox "Sent Messages" {
special_use = \Sent
}
# If you have a virtual "All messages" mailbox:
#mailbox virtual/All {
# special_use = \All
# comment = All my messages
#}
# If you have a virtual "Flagged" mailbox:
#mailbox virtual/Flagged {
# special_use = \Flagged
# comment = All my flagged messages
#}
# If you have a virtual "Important" mailbox:
#mailbox virtual/Important {
# special_use = \Important
# comment = All my important messages
#}
}

99
dovecot/conf.d/20-imap.conf.rpmnew
View File

@@ -1,99 +0,0 @@
##
## IMAP specific settings
##
# If nothing happens for this long while client is IDLEing, move the connection
# to imap-hibernate process and close the old imap process. This saves memory,
# because connections use very little memory in imap-hibernate process. The
# downside is that recreating the imap process back uses some resources.
#imap_hibernate_timeout = 0
# Maximum IMAP command line length. Some clients generate very long command
# lines with huge mailboxes, so you may need to raise this if you get
# "Too long argument" or "IMAP command line too large" errors often.
#imap_max_line_length = 64k
# IMAP logout format string:
# %i - total number of bytes read from client
# %o - total number of bytes sent to client
# %{fetch_hdr_count} - Number of mails with mail header data sent to client
# %{fetch_hdr_bytes} - Number of bytes with mail header data sent to client
# %{fetch_body_count} - Number of mails with mail body data sent to client
# %{fetch_body_bytes} - Number of bytes with mail body data sent to client
# %{deleted} - Number of mails where client added \Deleted flag
# %{expunged} - Number of mails that client expunged, which does not
# include automatically expunged mails
# %{autoexpunged} - Number of mails that were automatically expunged after
# client disconnected
# %{trashed} - Number of mails that client copied/moved to the
# special_use=\Trash mailbox.
# %{appended} - Number of mails saved during the session
#imap_logout_format = in=%i out=%o deleted=%{deleted} expunged=%{expunged} \
# trashed=%{trashed} hdr_count=%{fetch_hdr_count} \
# hdr_bytes=%{fetch_hdr_bytes} body_count=%{fetch_body_count} \
# body_bytes=%{fetch_body_bytes}
# Override the IMAP CAPABILITY response. If the value begins with '+',
# add the given capabilities on top of the defaults (e.g. +XFOO XBAR).
#imap_capability =
# How long to wait between "OK Still here" notifications when client is
# IDLEing.
#imap_idle_notify_interval = 2 mins
# ID field names and values to send to clients. Using * as the value makes
# Dovecot use the default value. The following fields have default values
# currently: name, version, os, os-version, support-url, support-email,
# revision.
#imap_id_send =
# ID fields sent by client to log. * means everything.
#imap_id_log =
# Workarounds for various client bugs:
# delay-newmail:
# Send EXISTS/RECENT new mail notifications only when replying to NOOP
# and CHECK commands. Some clients ignore them otherwise, for example OSX
# Mail (<v2.1). Outlook Express breaks more badly though, without this it
# may show user "Message no longer in server" errors. Note that OE6 still
# breaks even with this workaround if synchronization is set to
# "Headers Only".
# tb-extra-mailbox-sep:
# Thunderbird gets somehow confused with LAYOUT=fs (mbox and dbox) and
# adds extra '/' suffixes to mailbox names. This option causes Dovecot to
# ignore the extra '/' instead of treating it as invalid mailbox name.
# tb-lsub-flags:
# Show \Noselect flags for LSUB replies with LAYOUT=fs (e.g. mbox).
# This makes Thunderbird realize they aren't selectable and show them
# greyed out, instead of only later giving "not selectable" popup error.
#
# The list is space-separated.
#imap_client_workarounds =
# Host allowed in URLAUTH URLs sent by client. "*" allows all.
#imap_urlauth_host =
# Enable IMAP LITERAL- extension (replaces LITERAL+)
#imap_literal_minus = no
# What happens when FETCH fails due to some internal error:
# disconnect-immediately:
# The FETCH is aborted immediately and the IMAP client is disconnected.
# disconnect-after:
# The FETCH runs for all the requested mails returning as much data as
# possible. The client is finally disconnected without a tagged reply.
# no-after:
# Same as disconnect-after, but tagged NO reply is sent instead of
# disconnecting the client. If the client attempts to FETCH the same failed
# mail more than once, the client is disconnected. This is to avoid clients
# from going into infinite loops trying to FETCH a broken mail.
#imap_fetch_failure = disconnect-immediately
protocol imap {
# Space separated list of plugins to load (default is global mail_plugins).
#mail_plugins = $mail_plugins
# Maximum number of IMAP connections allowed for a user from each IP address.
# NOTE: The username is compared case-sensitively.
#mail_max_userip_connections = 10
}

40
dovecot/conf.d/20-lmtp.conf.rpmnew
View File

@@ -1,40 +0,0 @@
##
## LMTP specific settings
##
# Support proxying to other LMTP/SMTP servers by performing passdb lookups.
#lmtp_proxy = no
# When recipient address includes the detail (e.g. user+detail), try to save
# the mail to the detail mailbox. See also recipient_delimiter and
# lda_mailbox_autocreate settings.
#lmtp_save_to_detail_mailbox = no
# Verify quota before replying to RCPT TO. This adds a small overhead.
#lmtp_rcpt_check_quota = no
# Add "Received:" header to mails delivered.
#lmtp_add_received_header = yes
# Which recipient address to use for Delivered-To: header and Received:
# header. The default is "final", which is the same as the one given to
# RCPT TO command. "original" uses the address given in RCPT TO's ORCPT
# parameter, "none" uses nothing. Note that "none" is currently always used
# when a mail has multiple recipients.
#lmtp_hdr_delivery_address = final
# Workarounds for various client bugs:
# whitespace-before-path:
# Allow one or more spaces or tabs between `MAIL FROM:' and path and between
# `RCPT TO:' and path.
# mailbox-for-path:
# Allow using bare Mailbox syntax (i.e., without <...>) instead of full path
# syntax.
#
# The list is space-separated.
#lmtp_client_workarounds =
protocol lmtp {
# Space separated list of plugins to load (default is global mail_plugins).
#mail_plugins = $mail_plugins
}

83
dovecot/conf.d/90-quota.conf.rpmnew
View File

@@ -1,83 +0,0 @@
##
## Quota configuration.
##
# Note that you also have to enable quota plugin in mail_plugins setting.
# <doc/wiki/Quota.txt>
##
## Quota limits
##
# Quota limits are set using "quota_rule" parameters. To get per-user quota
# limits, you can set/override them by returning "quota_rule" extra field
# from userdb. It's also possible to give mailbox-specific limits, for example
# to give additional 100 MB when saving to Trash:
plugin {
#quota_rule = *:storage=1G
#quota_rule2 = Trash:storage=+100M
# LDA/LMTP allows saving the last mail to bring user from under quota to
# over quota, if the quota doesn't grow too high. Default is to allow as
# long as quota will stay under 10% above the limit. Also allowed e.g. 10M.
#quota_grace = 10%%
# Quota plugin can also limit the maximum accepted mail size.
#quota_max_mail_size = 100M
}
##
## Quota warnings
##
# You can execute a given command when user exceeds a specified quota limit.
# Each quota root has separate limits. Only the command for the first
# exceeded limit is excecuted, so put the highest limit first.
# The commands are executed via script service by connecting to the named
# UNIX socket (quota-warning below).
# Note that % needs to be escaped as %%, otherwise "% " expands to empty.
plugin {
#quota_warning = storage=95%% quota-warning 95 %u
#quota_warning2 = storage=80%% quota-warning 80 %u
}
# Example quota-warning service. The unix listener's permissions should be
# set in a way that mail processes can connect to it. Below example assumes
# that mail processes run as vmail user. If you use mode=0666, all system users
# can generate quota warnings to anyone.
#service quota-warning {
# executable = script /usr/local/bin/quota-warning.sh
# user = dovecot
# unix_listener quota-warning {
# user = vmail
# }
#}
##
## Quota backends
##
# Multiple backends are supported:
# dirsize: Find and sum all the files found from mail directory.
# Extremely SLOW with Maildir. It'll eat your CPU and disk I/O.
# dict: Keep quota stored in dictionary (eg. SQL)
# maildir: Maildir++ quota
# fs: Read-only support for filesystem quota
plugin {
#quota = dirsize:User quota
#quota = maildir:User quota
#quota = dict:User quota::proxy::quota
#quota = fs:User quota
}
# Multiple quota roots are also possible, for example this gives each user
# their own 100MB quota and one shared 1GB quota within the domain:
plugin {
#quota = dict:user::proxy::quota
#quota2 = dict:domain:%d:proxy::quota_domain
#quota_rule = *:storage=102400
#quota2_rule = *:storage=1048576
}

214
dovecot/conf.d/90-sieve.conf.rpmnew
View File

@@ -1,214 +0,0 @@
##
## Settings for the Sieve interpreter
##
# Do not forget to enable the Sieve plugin in 15-lda.conf and 20-lmtp.conf
# by adding it to the respective mail_plugins= settings.
# The Sieve interpreter can retrieve Sieve scripts from several types of
# locations. The default `file' location type is a local filesystem path
# pointing to a Sieve script file or a directory containing multiple Sieve
# script files. More complex setups can use other location types such as
# `ldap' or `dict' to fetch Sieve scripts from remote databases.
#
# All settings that specify the location of one ore more Sieve scripts accept
# the following syntax:
#
# location = [<type>:]path[;<option>[=<value>][;...]]
#
# If the type prefix is omitted, the script location type is 'file' and the
# location is interpreted as a local filesystem path pointing to a Sieve script
# file or directory. Refer to Pigeonhole wiki or INSTALL file for more
# information.
plugin {
# The location of the user's main Sieve script or script storage. The LDA
# Sieve plugin uses this to find the active script for Sieve filtering at
# delivery. The "include" extension uses this location for retrieving
# :personal" scripts. This is also where the ManageSieve service will store
# the user's scripts, if supported.
#
# Currently only the 'file:' location type supports ManageSieve operation.
# Other location types like 'dict:' and 'ldap:' can currently only
# be used as a read-only script source ().
#
# For the 'file:' type: use the ';active=' parameter to specify where the
# active script symlink is located.
# For other types: use the ';name=' parameter to specify the name of the
# default/active script.
sieve = file:~/sieve;active=~/.dovecot.sieve
# The default Sieve script when the user has none. This is the location of a
# global sieve script file, which gets executed ONLY if user's personal Sieve
# script doesn't exist. Be sure to pre-compile this script manually using the
# sievec command line tool if the binary is not stored in a global location.
# --> See sieve_before for executing scripts before the user's personal
# script.
#sieve_default = /var/lib/dovecot/sieve/default.sieve
# The name by which the default Sieve script (as configured by the
# sieve_default setting) is visible to the user through ManageSieve.
#sieve_default_name =
# Location for ":global" include scripts as used by the "include" extension.
#sieve_global =
# The location of a Sieve script that is run for any message that is about to
# be discarded; i.e., it is not delivered anywhere by the normal Sieve
# execution. This only happens when the "implicit keep" is canceled, by e.g.
# the "discard" action, and no actions that deliver the message are executed.
# This "discard script" can prevent discarding the message, by executing
# alternative actions. If the discard script does nothing, the message is
# still discarded as it would be when no discard script is configured.
#sieve_discard =
# Location Sieve of scripts that need to be executed before the user's
# personal script. If a 'file' location path points to a directory, all the
# Sieve scripts contained therein (with the proper `.sieve' extension) are
# executed. The order of execution within that directory is determined by the
# file names, using a normal 8bit per-character comparison.
#
# Multiple script locations can be specified by appending an increasing number
# to the setting name. The Sieve scripts found from these locations are added
# to the script execution sequence in the specified order. Reading the
# numbered sieve_before settings stops at the first missing setting, so no
# numbers may be skipped.
#sieve_before = /var/lib/dovecot/sieve.d/
#sieve_before2 = ldap:/etc/sieve-ldap.conf;name=ldap-domain
#sieve_before3 = (etc...)
# Identical to sieve_before, only the specified scripts are executed after the
# user's script (only when keep is still in effect!). Multiple script
# locations can be specified by appending an increasing number.
#sieve_after =
#sieve_after2 =
#sieve_after2 = (etc...)
# Which Sieve language extensions are available to users. By default, all
# supported extensions are available, except for deprecated extensions or
# those that are still under development. Some system administrators may want
# to disable certain Sieve extensions or enable those that are not available
# by default. This setting can use '+' and '-' to specify differences relative
# to the default. For example `sieve_extensions = +imapflags' will enable the
# deprecated imapflags extension in addition to all extensions were already
# enabled by default.
#sieve_extensions = +notify +imapflags
# Which Sieve language extensions are ONLY available in global scripts. This
# can be used to restrict the use of certain Sieve extensions to administrator
# control, for instance when these extensions can cause security concerns.
# This setting has higher precedence than the `sieve_extensions' setting
# (above), meaning that the extensions enabled with this setting are never
# available to the user's personal script no matter what is specified for the
# `sieve_extensions' setting. The syntax of this setting is similar to the
# `sieve_extensions' setting, with the difference that extensions are
# enabled or disabled for exclusive use in global scripts. Currently, no
# extensions are marked as such by default.
#sieve_global_extensions =
# The Pigeonhole Sieve interpreter can have plugins of its own. Using this
# setting, the used plugins can be specified. Check the Dovecot wiki
# (wiki2.dovecot.org) or the pigeonhole website
# (http://pigeonhole.dovecot.org) for available plugins.
# The sieve_extprograms plugin is included in this release.
#sieve_plugins =
# The separator that is expected between the :user and :detail
# address parts introduced by the subaddress extension. This may
# also be a sequence of characters (e.g. '--'). The current
# implementation looks for the separator from the left of the
# localpart and uses the first one encountered. The :user part is
# left of the separator and the :detail part is right. This setting
# is also used by Dovecot's LMTP service.
#recipient_delimiter = +
# The maximum size of a Sieve script. The compiler will refuse to compile any
# script larger than this limit. If set to 0, no limit on the script size is
# enforced.
#sieve_max_script_size = 1M
# The maximum number of actions that can be performed during a single script
# execution. If set to 0, no limit on the total number of actions is enforced.
#sieve_max_actions = 32
# The maximum number of redirect actions that can be performed during a single
# script execution. If set to 0, no redirect actions are allowed.
#sieve_max_redirects = 4
# The maximum number of personal Sieve scripts a single user can have. If set
# to 0, no limit on the number of scripts is enforced.
# (Currently only relevant for ManageSieve)
#sieve_quota_max_scripts = 0
# The maximum amount of disk storage a single user's scripts may occupy. If
# set to 0, no limit on the used amount of disk storage is enforced.
# (Currently only relevant for ManageSieve)
#sieve_quota_max_storage = 0
# The primary e-mail address for the user. This is used as a default when no
# other appropriate address is available for sending messages. If this setting
# is not configured, either the postmaster or null "<>" address is used as a
# sender, depending on the action involved. This setting is important when
# there is no message envelope to extract addresses from, such as when the
# script is executed in IMAP.
#sieve_user_email =
# The path to the file where the user log is written. If not configured, a
# default location is used. If the main user's personal Sieve (as configured
# with sieve=) is a file, the logfile is set to <filename>.log by default. If
# it is not a file, the default user log file is ~/.dovecot.sieve.log.
#sieve_user_log =
# Specifies what envelope sender address is used for redirected messages.
# The following values are supported for this setting:
#
# "sender" - The sender address is used (default).
# "recipient" - The final recipient address is used.
# "orig_recipient" - The original recipient is used.
# "user_email" - The user's primary address is used. This is
# configured with the "sieve_user_email" setting. If
# that setting is unconfigured, "user_mail" is equal to
# "recipient".
# "postmaster" - The postmaster_address configured for the LDA.
# "<user@domain>" - Redirected messages are always sent from user@domain.
# The angle brackets are mandatory. The null "<>" address
# is also supported.
#
# This setting is ignored when the envelope sender is "<>". In that case the
# sender of the redirected message is also always "<>".
#sieve_redirect_envelope_from = sender
## TRACE DEBUGGING
# Trace debugging provides detailed insight in the operations performed by
# the Sieve script. These settings apply to both the LDA Sieve plugin and the
# IMAPSIEVE plugin.
#
# WARNING: On a busy server, this functionality can quickly fill up the trace
# directory with a lot of trace files. Enable this only temporarily and as
# selective as possible.
# The directory where trace files are written. Trace debugging is disabled if
# this setting is not configured or if the directory does not exist. If the
# path is relative or it starts with "~/" it is interpreted relative to the
# current user's home directory.
#sieve_trace_dir =
# The verbosity level of the trace messages. Trace debugging is disabled if
# this setting is not configured. Possible values are:
#
# "actions" - Only print executed action commands, like keep,
# fileinto, reject and redirect.
# "commands" - Print any executed command, excluding test commands.
# "tests" - Print all executed commands and performed tests.
# "matching" - Print all executed commands, performed tests and the
# values matched in those tests.
#sieve_trace_level =
# Enables highly verbose debugging messages that are usually only useful for
# developers.
#sieve_trace_debug = no
# Enables showing byte code addresses in the trace output, rather than only
# the source line numbers.
#sieve_trace_addresses = no
}

101
dovecot/dovecot.conf.rpmnew
View File

@@ -1,101 +0,0 @@
## Dovecot configuration file
# If you're in a hurry, see http://wiki2.dovecot.org/QuickConfiguration
# "doveconf -n" command gives a clean output of the changed settings. Use it
# instead of copy&pasting files when posting to the Dovecot mailing list.
# '#' character and everything after it is treated as comments. Extra spaces
# and tabs are ignored. If you want to use either of these explicitly, put the
# value inside quotes, eg.: key = "# char and trailing whitespace "
# Most (but not all) settings can be overridden by different protocols and/or
# source/destination IPs by placing the settings inside sections, for example:
# protocol imap { }, local 127.0.0.1 { }, remote 10.0.0.0/8 { }
# Default values are shown for each setting, it's not required to uncomment
# those. These are exceptions to this though: No sections (e.g. namespace {})
# or plugin settings are added by default, they're listed only as examples.
# Paths are also just examples with the real defaults being based on configure
# options. The paths listed here are for configure --prefix=/usr
# --sysconfdir=/etc --localstatedir=/var
# Protocols we want to be serving.
#protocols = imap pop3 lmtp submission
# A comma separated list of IPs or hosts where to listen in for connections.
# "*" listens in all IPv4 interfaces, "::" listens in all IPv6 interfaces.
# If you want to specify non-default ports or anything more complex,
# edit conf.d/master.conf.
#listen = *, ::
# Base directory where to store runtime data.
#base_dir = /var/run/dovecot/
# Name of this instance. In multi-instance setup doveadm and other commands
# can use -i <instance_name> to select which instance is used (an alternative
# to -c <config_path>). The instance name is also added to Dovecot processes
# in ps output.
#instance_name = dovecot
# Greeting message for clients.
#login_greeting = Dovecot ready.
# Space separated list of trusted network ranges. Connections from these
# IPs are allowed to override their IP addresses and ports (for logging and
# for authentication checks). disable_plaintext_auth is also ignored for
# these networks. Typically you'd specify your IMAP proxy servers here.
#login_trusted_networks =
# Space separated list of login access check sockets (e.g. tcpwrap)
#login_access_sockets =
# With proxy_maybe=yes if proxy destination matches any of these IPs, don't do
# proxying. This isn't necessary normally, but may be useful if the destination
# IP is e.g. a load balancer's IP.
#auth_proxy_self =
# Show more verbose process titles (in ps). Currently shows user name and
# IP address. Useful for seeing who are actually using the IMAP processes
# (eg. shared mailboxes or if same uid is used for multiple accounts).
#verbose_proctitle = no
# Should all processes be killed when Dovecot master process shuts down.
# Setting this to "no" means that Dovecot can be upgraded without
# forcing existing client connections to close (although that could also be
# a problem if the upgrade is e.g. because of a security fix).
#shutdown_clients = yes
# If non-zero, run mail commands via this many connections to doveadm server,
# instead of running them directly in the same process.
#doveadm_worker_count = 0
# UNIX socket or host:port used for connecting to doveadm server
#doveadm_socket_path = doveadm-server
# Space separated list of environment variables that are preserved on Dovecot
# startup and passed down to all of its child processes. You can also give
# key=value pairs to always set specific settings.
#import_environment = TZ
##
## Dictionary server settings
##
# Dictionary can be used to store key=value lists. This is used by several
# plugins. The dictionary can be accessed either directly or though a
# dictionary server. The following dict block maps dictionary names to URIs
# when the server is used. These can then be referenced using URIs in format
# "proxy::<name>".
dict {
#quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext
}
# Most of the actual configuration gets included below. The filenames are
# first sorted by their ASCII value and parsed in that order. The 00-prefixes
# in filenames are intended to make it easier to understand the ordering.
!include conf.d/*.conf
# A config file can also tried to be included without giving an error if
# it's not found:
!include_try local.conf