committing changes in /etc made by "-bash"

Package changes:

.etckeeper

@@ -5045,22 +5045,6 @@ maybe chmod 0644 'oddjobd.conf'
 maybe chmod 0755 'oddjobd.conf.d'
 maybe chmod 0644 'oddjobd.conf.d/oddjobd-introspection.conf'
 maybe chmod 0644 'oddjobd.conf.d/oddjobd-mkhomedir.conf'
-maybe chmod 0755 'one-context.d'
-maybe chmod 0755 'one-context.d/loc-05-grow-rootfs'
-maybe chmod 0755 'one-context.d/loc-09-timezone'
-maybe chmod 0755 'one-context.d/loc-10-network'
-maybe chmod 0755 'one-context.d/loc-10-network-pci'
-maybe chmod 0755 'one-context.d/loc-11-dns'
-maybe chmod 0755 'one-context.d/loc-14-mount-swap'
-maybe chmod 0755 'one-context.d/loc-16-gen-env'
-maybe chmod 0755 'one-context.d/loc-20-set-username-password'
-maybe chmod 0755 'one-context.d/loc-22-ssh_public_key'
-maybe chmod 0755 'one-context.d/loc-30-console'
-maybe chmod 0755 'one-context.d/loc-35-securetty'
-maybe chmod 0755 'one-context.d/net-15-hostname'
-maybe chmod 0755 'one-context.d/net-97-start-script'
-maybe chmod 0755 'one-context.d/net-98-execute-scripts'
-maybe chmod 0755 'one-context.d/net-99-report-ready'
 maybe chgrp 'opendkim' 'opendkim'
 maybe chmod 0755 'opendkim'
 maybe chmod 0644 'opendkim.conf'
@@ -5150,7 +5134,6 @@ maybe chmod 0755 'pam.d/system-auth-ac'
 maybe chmod 0644 'pam.d/system-auth.i360bak'
 maybe chmod 0644 'pam.d/systemd-user'
 maybe chmod 0644 'pam.d/vlock'
-maybe chmod 0644 'pam.d/vmtoolsd'
 maybe chmod 0644 'pam.d/vsftpd'
 maybe chmod 0644 'papersize'
 maybe chmod 0644 'passwd'
@@ -5631,7 +5614,6 @@ maybe chmod 0755 'rc.d/init.d'
 maybe chmod 0644 'rc.d/init.d/README'
 maybe chmod 0755 'rc.d/init.d/bestcrypt'
 maybe chmod 0644 'rc.d/init.d/functions'
-maybe chmod 0755 'rc.d/init.d/network'
 maybe chmod 0755 'rc.d/init.d/rundeckd'
 maybe chmod 0755 'rc.d/init.d/vpn-gazduire'
 maybe chmod 0755 'rc.d/rc.local'
@@ -6088,36 +6070,10 @@ maybe chmod 0644 'sysconfig/named'
 maybe chmod 0644 'sysconfig/network'
 maybe chmod 0755 'sysconfig/network-scripts'
 maybe chmod 0644 'sysconfig/network-scripts/ifcfg-eth0'
-maybe chmod 0644 'sysconfig/network-scripts/ifcfg-lo'
-maybe chmod 0755 'sysconfig/network-scripts/ifdown'
 maybe chmod 0755 'sysconfig/network-scripts/ifdown-Team'
 maybe chmod 0755 'sysconfig/network-scripts/ifdown-TeamPort'
-maybe chmod 0755 'sysconfig/network-scripts/ifdown-bnep'
-maybe chmod 0755 'sysconfig/network-scripts/ifdown-eth'
-maybe chmod 0755 'sysconfig/network-scripts/ifdown-ippp'
-maybe chmod 0755 'sysconfig/network-scripts/ifdown-ipv6'
-maybe chmod 0755 'sysconfig/network-scripts/ifdown-post'
-maybe chmod 0755 'sysconfig/network-scripts/ifdown-routes'
-maybe chmod 0755 'sysconfig/network-scripts/ifdown-sit'
-maybe chmod 0755 'sysconfig/network-scripts/ifdown-tunnel'
-maybe chmod 0755 'sysconfig/network-scripts/ifup'
 maybe chmod 0755 'sysconfig/network-scripts/ifup-Team'
 maybe chmod 0755 'sysconfig/network-scripts/ifup-TeamPort'
-maybe chmod 0755 'sysconfig/network-scripts/ifup-aliases'
-maybe chmod 0755 'sysconfig/network-scripts/ifup-bnep'
-maybe chmod 0755 'sysconfig/network-scripts/ifup-eth'
-maybe chmod 0755 'sysconfig/network-scripts/ifup-ippp'
-maybe chmod 0755 'sysconfig/network-scripts/ifup-ipv6'
-maybe chmod 0755 'sysconfig/network-scripts/ifup-plip'
-maybe chmod 0755 'sysconfig/network-scripts/ifup-plusb'
-maybe chmod 0755 'sysconfig/network-scripts/ifup-post'
-maybe chmod 0755 'sysconfig/network-scripts/ifup-routes'
-maybe chmod 0755 'sysconfig/network-scripts/ifup-sit'
-maybe chmod 0755 'sysconfig/network-scripts/ifup-tunnel'
-maybe chmod 0755 'sysconfig/network-scripts/ifup-wireless'
-maybe chmod 0755 'sysconfig/network-scripts/init.ipv6-global'
-maybe chmod 0644 'sysconfig/network-scripts/network-functions'
-maybe chmod 0644 'sysconfig/network-scripts/network-functions-ipv6'
 maybe chmod 0644 'sysconfig/network-scripts/route-eth0'
 maybe chmod 0600 'sysconfig/nftables.conf'
 maybe chmod 0644 'sysconfig/node_exporter'
@@ -6189,7 +6145,6 @@ maybe chmod 0755 'systemd/system/sysinit.target.wants'
 maybe chmod 0755 'systemd/system/timers.target.wants'
 maybe chmod 0644 'systemd/system/var-lib-snapd-snap-core18-1885.mount'
 maybe chmod 0644 'systemd/system/var-lib-snapd-snap-snapd-9279.mount'
-maybe chmod 0755 'systemd/system/vmtoolsd.service.requires'
 maybe chmod 0755 'systemd/user'
 maybe chmod 0644 'systemd/user.conf'
 maybe chmod 0755 'systemd/user/sockets.target.wants'
@@ -6216,8 +6171,6 @@ maybe chmod 0444 'udev/hwdb.bin'
 maybe chmod 0755 'udev/hwdb.d'
 maybe chmod 0755 'udev/rules.d'
 maybe chmod 0644 'udev/rules.d/70-snap.snapd.rules'
-maybe chmod 0644 'udev/rules.d/75-cd-aliases-generator.rules'
-maybe chmod 0644 'udev/rules.d/75-persistent-net-generator.rules'
 maybe chmod 0644 'udev/rules.d/90-bcrypt-device-permissions.rules'
 maybe chmod 0644 'udev/udev.conf'
 maybe chmod 0755 'unbound'
@@ -6227,29 +6180,6 @@ maybe chmod 0644 'updatedb.conf'
 maybe chmod 0644 'vconsole.conf'
 maybe chmod 0644 'vimrc'
 maybe chmod 0644 'virc'
-maybe chmod 0755 'vmware-tools'
-maybe chmod 0755 'vmware-tools/poweroff-vm-default'
-maybe chmod 0755 'vmware-tools/poweron-vm-default'
-maybe chmod 0755 'vmware-tools/resume-vm-default'
-maybe chmod 0755 'vmware-tools/scripts'
-maybe chmod 0755 'vmware-tools/scripts/vmware'
-maybe chmod 0755 'vmware-tools/scripts/vmware/network'
-maybe chmod 0755 'vmware-tools/statechange.subr'
-maybe chmod 0755 'vmware-tools/suspend-vm-default'
-maybe chmod 0644 'vmware-tools/tools.conf.example'
-maybe chmod 0755 'vmware-tools/vgauth'
-maybe chmod 0644 'vmware-tools/vgauth.conf'
-maybe chmod 0755 'vmware-tools/vgauth/schemas'
-maybe chmod 0644 'vmware-tools/vgauth/schemas/XMLSchema-hasFacetAndProperty.xsd'
-maybe chmod 0644 'vmware-tools/vgauth/schemas/XMLSchema-instance.xsd'
-maybe chmod 0644 'vmware-tools/vgauth/schemas/XMLSchema.dtd'
-maybe chmod 0644 'vmware-tools/vgauth/schemas/XMLSchema.xsd'
-maybe chmod 0644 'vmware-tools/vgauth/schemas/catalog.xml'
-maybe chmod 0644 'vmware-tools/vgauth/schemas/datatypes.dtd'
-maybe chmod 0644 'vmware-tools/vgauth/schemas/saml-schema-assertion-2.0.xsd'
-maybe chmod 0644 'vmware-tools/vgauth/schemas/xenc-schema.xsd'
-maybe chmod 0644 'vmware-tools/vgauth/schemas/xml.xsd'
-maybe chmod 0644 'vmware-tools/vgauth/schemas/xmldsig-core-schema.xsd'
 maybe chmod 0755 'vpnc'
 maybe chmod 0600 'vpnc/default.conf'
 maybe chmod 0644 'vpnc/vpnc-0.5.3-27.svn550.fc24.src.rpm'

alternatives/ifdown

@@ -1 +0,0 @@
-/etc/sysconfig/network-scripts/ifdown

alternatives/ifup

@@ -1 +0,0 @@
-/etc/sysconfig/network-scripts/ifup

one-context.d/loc-05-grow-rootfs

@@ -1,99 +0,0 @@
-#!/usr/bin/env bash
-
-# -------------------------------------------------------------------------- #
-# Copyright 2002-2020, OpenNebula Project, OpenNebula Systems                #
-#                                                                            #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
-# not use this file except in compliance with the License. You may obtain    #
-# a copy of the License at                                                   #
-#                                                                            #
-# http://www.apache.org/licenses/LICENSE-2.0                                 #
-#                                                                            #
-# Unless required by applicable law or agreed to in writing, software        #
-# distributed under the License is distributed on an "AS IS" BASIS,          #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-# See the License for the specific language governing permissions and        #
-# limitations under the License.                                             #
-#--------------------------------------------------------------------------- #
-
-set -e
-
-GROW_ROOTFS=${GROW_ROOTFS:-YES}
-GROW_ROOTFS=${GROW_ROOTFS^^}
-
-if [ "${GROW_ROOTFS}" != 'YES' ]; then
-    echo 'Skipped root filesystem growing.' >&2
-    exit 0
-fi
-
-# FreeBSD
-if [ -x /etc/rc.d/growfs ]; then
-    /etc/rc.d/growfs onestart
-    exit $?
-fi
-
-MOUNT_LINE=$(cat /etc/mtab | grep ' / ' | grep -v '^rootfs')
-DEVICE=$(echo "$MOUNT_LINE" | cut -d' ' -f1)
-FSTYPE=$(echo "$MOUNT_LINE" | cut -d' ' -f3)
-GROWPART=$(which growpart)
-
-if [ $? -ne 0 ]; then
-  echo "growpart command is missing"
-  exit 1
-fi
-
-if [ $(lvdisplay ${DEVICE} 2>/dev/null | wc -l) -eq 0 ]; then
-  DEVICE=$(findmnt -ln -o SOURCE /)
-  DISK=$(echo "$DEVICE" | sed 's/[0-9]*$//')
-  PARTITION=$(echo "$DEVICE" | sed "s|^$DISK||")
-  LVM="no"
-fi
-
-if [ "${LVM}" != "no" ]; then
-  if [ -f /etc/debian_version ]; then
-    DEVICE=$(mount | grep ' / ' | grep -v '^rootfs'|cut -d' ' -f1)
-  fi
-  PVRESIZE=$(which pvresize)
-  LVEXTEND=$(which lvextend)
-  DISK=$(pvdisplay |grep "PV Name"|awk '{print $3}'|sed 's/.$//')
-  PARTITION=$(pvdisplay |grep "PV Name"|awk '{print $3}'| sed "s|^${DISK}||")
-  PV=$(pvdisplay |grep "PV Name"|awk '{print $3}')
-  LV=$(lvdisplay ${DEVICE} |grep "LV Path"|awk '{print $3}')
-
-  # when PV is on MSDOS logical partition, detect the umbrella
-  # extended partition and grow it first
-  TABLE=$(parted -s ${DISK} print 2>/dev/null | grep 'Partition Table:' | awk '{print $3}')
-  if [ "${TABLE}" = 'msdos' ] && [ ${PARTITION} -gt 4 ]; then
-    PARTITION="$(parted -s ${DISK} print | grep 'extended' | awk '{print $1}') $PARTITION"
-  fi
-fi
-
-if [ -n "$DEBUG" ]; then
-  echo DEVICE: ${DEVICE}
-  echo FSTYPE: ${FSTYPE}
-  echo DISK: ${DISK}
-  echo PARTITION: ${PARTITION}
-fi
-
-(
-  for PART in ${PARTITION}; do
-    ${GROWPART} ${DISK} ${PART}
-  done
-
-  if [ "${LVM}" != "no" ]; then
-    ${PVRESIZE} ${PV}
-    ${LVEXTEND} -l +100%FREE ${LV}
-  fi
-) || :  # don't fail, partition can be already extended by dracut
-
-case "${FSTYPE}" in
-  ext2|ext3|ext4)
-    resize2fs ${DEVICE}
-    ;;
-  xfs)
-    xfs_growfs /
-    ;;
-  btrfs)
-    btrfs filesystem resize max /
-    ;;
-esac

one-context.d/loc-09-timezone

@@ -1,38 +0,0 @@
-#!/usr/bin/env bash
-
-# -------------------------------------------------------------------------- #
-# Copyright 2002-2020, OpenNebula Project, OpenNebula Systems                #
-#                                                                            #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
-# not use this file except in compliance with the License. You may obtain    #
-# a copy of the License at                                                   #
-#                                                                            #
-# http://www.apache.org/licenses/LICENSE-2.0                                 #
-#                                                                            #
-# Unless required by applicable law or agreed to in writing, software        #
-# distributed under the License is distributed on an "AS IS" BASIS,          #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-# See the License for the specific language governing permissions and        #
-# limitations under the License.                                             #
-#--------------------------------------------------------------------------- #
-
-if [ -z "${TIMEZONE}" ]; then
-    exit 0
-fi
-
-if ! timedatectl set-timezone "${TIMEZONE}" 2>/dev/null; then
-    _tz_base='/usr/share/zoneinfo/'
-    _tz_dest=$(readlink -f "${_tz_base}${TIMEZONE}" 2>/dev/null)
-
-    # if timezone file path is resolvable file and
-    # real path is inside the timezone directory
-    if [ -n "${_tz_dest}" ] &&
-       [ -f "${_tz_dest}" ] &&
-       [[ "${_tz_dest}" =~ ^${_tz_base} ]];
-    then
-        ln -sf "${_tz_dest}" /etc/localtime
-    else
-        echo "ERROR: Invalid timezone '${TIMEZONE}'" >&2
-        exit 1
-    fi
-fi

one-context.d/loc-10-network

@@ -1,320 +0,0 @@
-#!/usr/bin/env bash
-
-# -------------------------------------------------------------------------- #
-# Copyright 2002-2020, OpenNebula Project, OpenNebula Systems                #
-#                                                                            #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
-# not use this file except in compliance with the License. You may obtain    #
-# a copy of the License at                                                   #
-#                                                                            #
-# http://www.apache.org/licenses/LICENSE-2.0                                 #
-#                                                                            #
-# Unless required by applicable law or agreed to in writing, software        #
-# distributed under the License is distributed on an "AS IS" BASIS,          #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-# See the License for the specific language governing permissions and        #
-# limitations under the License.                                             #
-#--------------------------------------------------------------------------- #
-
-COMMAND=${1}
-
-# Gets IP address from a given MAC
-mac2ip() {
-    mac=$1
-
-    let ip_a=0x`echo $mac | cut -d: -f 3`
-    let ip_b=0x`echo $mac | cut -d: -f 4`
-    let ip_c=0x`echo $mac | cut -d: -f 5`
-    let ip_d=0x`echo $mac | cut -d: -f 6`
-
-    ip="$ip_a.$ip_b.$ip_c.$ip_d"
-
-    echo $ip
-}
-
-# Gets the network part of an IP
-get_network() {
-    network=$(get_iface_var "NETWORK")
-
-    if [ -z "$network" ]; then
-        IFS=. read -r i1 i2 i3 i4 <<< "$IP"
-        IFS=. read -r m1 m2 m3 m4 <<< "$(get_mask)"
-        network=$(printf "%d.%d.%d.%d\n" "$((i1 & m1))" "$((i2 & m2))" "$((i3 & m3))" "$((i4 & m4))")
-    fi
-
-    echo $network
-}
-
-# Gets the network mask
-get_mask() {
-    mask=$(get_iface_var "MASK")
-
-    if [ -z "$mask" ]; then
-        mask="255.255.255.0"
-    fi
-
-    echo $mask
-}
-
-# Gets device MTU
-get_mtu() {
-    mtu=$(get_iface_var "MTU")
-
-    echo $mtu
-}
-
-is_gateway() {
-    if [ -z "$GATEWAY_IFACE_NUM" ]; then
-        true
-    else
-        [ "$IFACE_NUM" = "$GATEWAY_IFACE_NUM" ]
-    fi
-}
-
-# Gets the network gateway
-get_gateway() {
-    if is_gateway; then
-        gateway=$(get_iface_var "GATEWAY")
-
-        echo $gateway
-    fi
-}
-
-# Gets the network gateway6
-get_gateway6() {
-    if is_gateway; then
-        get_iface_var "GATEWAY6"
-    fi
-}
-
-get_ip() {
-    ip=$(get_iface_var "IP")
-
-    echo $ip
-}
-
-get_iface_var() {
-    var_name="${UPCASE_DEV}_$1"
-    var=$(eval "echo \"\${$var_name}\"")
-
-    echo $var
-}
-
-gen_iface_conf() {
-    cat <<EOT
-NETMASK=$MASK
-IPADDR=$IP
-EOT
-
-    if [ -n "$GATEWAY" ]; then
-        if [ "$CONFIG_PATH" = "/etc/sysconfig/network" ]; then
-            echo "default $GATEWAY - $DEV ${METRIC:+metric ${METRIC}}" \
-                >> "${CONFIG_PATH}/ifroute-${DEV}"
-        else
-            echo "default via $GATEWAY dev $DEV ${METRIC:+metric ${METRIC}}" \
-                >> "${CONFIG_PATH}/route-${DEV}"
-        fi
-    fi
-
-    if [ -n "$MTU" ]; then
-        echo "MTU=$MTU"
-    fi
-}
-
-gen_alias_conf() {
-    cat <<EOT
-IPADDR${ALIAS_NUM}="${IP}"
-NETMASK${ALIAS_NUM}="${MASK}"
-EOT
-}
-
-gen_alias6_conf() {
-    if [ "$CONFIG_PATH" = "/etc/sysconfig/network" ]; then
-        echo "IPADDR_A6A${ALIAS_NUM}=$IP6/${IP6_PREFIX_LENGTH:-64}"
-    else
-        IPV6ADDR_SECONDARIES="${IPV6ADDR_SECONDARIES} ${IP6}/${IP6_PREFIX_LENGTH:-64}"
-    fi
-
-    if [ -n "$IP6_ULA" ]; then
-        if [ "$CONFIG_PATH" = "/etc/sysconfig/network" ]; then
-            echo "IPADDR_A6B${ALIAS_NUM}=$IP6_ULA/64"
-        else
-            IPV6ADDR_SECONDARIES="${IPV6ADDR_SECONDARIES} ${IP6_ULA}/64"
-        fi
-    fi
-}
-
-gen_iface6_conf() {
-    if [ "$CONFIG_PATH" = "/etc/sysconfig/network" ]; then
-        echo "IPADDR_6A=$IP6/${IP6_PREFIX_LENGTH:-64}"
-
-        cat <<EOT >> /etc/sysconfig/network/ifsysctl-$DEV
-net.ipv6.conf.\$SYSCTL_IF.autoconf = 0
-net.ipv6.conf.\$SYSCTL_IF.accept_ra = 0
-EOT
-    else
-        cat <<EOT
-IPV6INIT=yes
-IPV6ADDR=$IP6/${IP6_PREFIX_LENGTH:-64}
-IPV6_AUTOCONF=no
-EOT
-    fi
-
-    if [ -n "$IP6_ULA" ]; then
-        if [ "$CONFIG_PATH" = "/etc/sysconfig/network" ]; then
-            echo "IPADDR_6B=$IP6_ULA/64"
-        else
-            IPV6ADDR_SECONDARIES="${IPV6ADDR_SECONDARIES} ${IP6_ULA}/64"
-        fi
-    fi
-
-    if [ -n "$GATEWAY6" ]; then
-        if [ "$CONFIG_PATH" = "/etc/sysconfig/network" ]; then
-            echo "default $GATEWAY6 - $DEV" >> /etc/sysconfig/network/ifroute-$DEV
-        else
-            echo "IPV6_DEFAULTGW=$GATEWAY6"
-        fi
-    fi
-
-    if [ -n "$MTU" ]; then
-        echo "IPV6_MTU=$MTU"
-    fi
-}
-
-get_interface_mac()
-{
-    ip link show | awk '/^[0-9]+: [A-Za-z0-9@]+:/ { device=$2; gsub(/:/, "",device); split(device,dev,"@")} /link\/ether/ { print dev[1]  " " $2 }'
-}
-
-get_context_interfaces()
-{
-    env | grep -E "^ETH[0-9]+_MAC=" | sed 's/_.*$//' | sort
-}
-
-get_interface_alias()
-{
-    env | grep -E "^ETH${INDEX}_ALIAS[0-9]+_MAC=" | cut -d '_' -f 2 | sort
-}
-
-get_dev()
-{
-    list="$1"
-    mac="$2"
-
-    echo "$list" | grep "$mac" | cut -d' ' -f1 | tail -n1
-}
-
-gen_network_configuration()
-{
-    if [ -d /etc/sysconfig/network-scripts ]; then
-        CONFIG_PATH=/etc/sysconfig/network-scripts
-    elif [ -d /etc/sysconfig/network ]; then
-        CONFIG_PATH=/etc/sysconfig/network
-    fi
-
-    INTERFACE_MAC=$(get_interface_mac)
-    CONTEXT_INTERFACES=$(get_context_interfaces)
-    GATEWAY_IFACE_NUM=$(echo "$GATEWAY_IFACE" | sed 's/^ETH//')
-
-    for interface in $CONTEXT_INTERFACES; do
-        UPCASE_DEV=$interface
-        MAC=$(get_iface_var "MAC")
-        DEV=$(get_dev "$INTERFACE_MAC" "$MAC")
-        IFACE_NUM=$(echo "$UPCASE_DEV" | sed 's/^ETH//')
-
-        IP=$(get_ip)
-        NETWORK=$(get_network)
-        MASK=$(get_mask)
-        MTU=$(get_mtu)
-        GATEWAY=$(get_gateway)
-        METRIC=$(get_iface_var "METRIC")
-
-        IP6=$(get_iface_var "IP6")
-        [[ -z $IP6 ]] && IP6=$(get_iface_var "IPV6")
-        IP6_PREFIX_LENGTH=$(get_iface_var "IP6_PREFIX_LENGTH")
-        IP6_ULA=$(get_iface_var "IP6_ULA")
-        GATEWAY6=$(get_gateway6)
-
-        # cumulative variable
-        IPV6ADDR_SECONDARIES=''
-
-        [ -z "${IP}${IP6}" ] && continue
-        [ -z "${DEV}" ] && continue
-
-        (
-            rm -f /etc/sysconfig/network-scripts/route-$DEV
-            rm -f /etc/sysconfig/network/ifroute-$DEV
-            rm -f /etc/sysconfig/network/ifsysctl-$DEV
-
-            cat <<EOT
-DEVICE=$DEV
-BOOTPROTO=static
-NM_CONTROLLED=no
-TYPE=Ethernet
-EOT
-            if [ "$CONFIG_PATH" = "/etc/sysconfig/network" ]; then
-                echo "STARTMODE=auto"
-            else
-                echo "ONBOOT=yes"
-            fi
-
-            [[ -n $IP ]] && gen_iface_conf
-            [[ -n $IP6 ]] && gen_iface6_conf
-
-            INDEX=${interface: -1}
-            ALIAS=$(get_interface_alias)
-            ALIAS_NUM=0
-
-            for nic_alias in $ALIAS; do
-                UPCASE_DEV="ETH${INDEX}_${nic_alias}"
-                IP=$(get_ip)
-                MASK=$(get_mask)
-
-                IP6=$(get_iface_var "IP6")
-                [[ -z $IP6 ]] && IP6=$(get_iface_var "IPV6")
-                IP6_PREFIX_LENGTH=$(get_iface_var "IP6_PREFIX_LENGTH")
-                IP6_ULA=$(get_iface_var "IP6_ULA")
-
-                EXTERNAL=$(get_iface_var "EXTERNAL")
-                EXTERNAL=${EXTERNAL^^}
-                DETACH=$(get_iface_var "DETACH")
-
-                if [ -z "${DETACH}" ]; then
-                    if [ -z "${EXTERNAL}" ] || [ "$EXTERNAL" = "NO" ]; then
-                        [ -n "${IP}"  ] && gen_alias_conf
-                        [ -n "${IP6}" ] && gen_alias6_conf
-
-                        if [ -n "${IP}${IP6}" ]; then
-                            ALIAS_NUM=$((ALIAS_NUM + 1))
-                        fi
-                    fi
-                fi
-            done
-
-            # on Red Hats, we need just a single configuration
-            # entry with all additional IPv6 addresses
-            if [ -n "${IPV6ADDR_SECONDARIES}" ]; then
-                echo "IPV6ADDR_SECONDARIES='${IPV6ADDR_SECONDARIES## }'"
-            fi
-        ) > ${CONFIG_PATH}/ifcfg-${DEV}
-
-        ifup ${DEV}
-
-    done
-}
-
-configure_network()
-{
-    gen_network_configuration
-
-    if [ "${COMMAND}" = 'reconfigure' ]; then
-        service network restart
-    fi
-
-    sleep 2
-}
-
-[ -z "$(env | cut -d= -f1 | grep -E '^ETH[0-9]+_IPV*6*')" ] && exit 0
-
-configure_network
-

one-context.d/loc-10-network-pci

@@ -1,113 +0,0 @@
-#!/usr/bin/env bash
-
-# -------------------------------------------------------------------------- #
-# Copyright 2002-2020, OpenNebula Project, OpenNebula Systems                #
-#                                                                            #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
-# not use this file except in compliance with the License. You may obtain    #
-# a copy of the License at                                                   #
-#                                                                            #
-# http://www.apache.org/licenses/LICENSE-2.0                                 #
-#                                                                            #
-# Unless required by applicable law or agreed to in writing, software        #
-# distributed under the License is distributed on an "AS IS" BASIS,          #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-# See the License for the specific language governing permissions and        #
-# limitations under the License.                                             #
-#--------------------------------------------------------------------------- #
-
-get_iface_var()
-{
-    var_name="${UPCASE_DEV}_$1"
-    var=$(eval "echo \"\${$var_name}\"")
-
-    echo $var
-}
-
-get_pci_interfaces()
-{
-    env | grep -E "^PCI[0-9]+_MAC=" | sed 's/_.*$//' | sort
-}
-
-get_dev_from_pci()
-{
-    DEV=$(find /sys/class/net/*/device -lname "*$1" 2>/dev/null | awk -F '/' '{print $5}')
-
-    if [ -z "$DEV" ]; then
-        echo "PCI Device $1 not found" >&2
-        return
-    fi
-
-    if [ `echo "$DEV" | wc -l` -gt 1 ]; then
-        echo "More than one PCI Device $1 found" >&2
-        return
-    fi
-
-    echo "$DEV"
-}
-
-PCI_INTERFACES=$(get_pci_interfaces)
-
-for pci in $PCI_INTERFACES; do
-    UPCASE_DEV=$pci
-
-    IP=$(get_iface_var "IP")
-    MAC=$(get_iface_var "MAC")
-    MASK=$(get_iface_var "MASK")
-    MASK=${MASK:-255.255.255.0}
-    GATEWAY=$(get_iface_var "GATEWAY")
-    METRIC=$(get_iface_var "METRIC")
-    MTU=$(get_iface_var "MTU")
-    MTU=${MTU:-1500}
-    VLAN_ID=$(get_iface_var "VLAN_ID")
-
-    IP6=$(get_iface_var "IP6")
-    IP6_PREFIX_LENGTH=$(get_iface_var "IP6_PREFIX_LENGTH")
-    IP6_PREFIX_LENGTH=${IP6_PREFIX_LENGTH:-64}
-    IP6_ULA=$(get_iface_var "IP6_ULA")
-    GATEWAY6=$(get_iface_var "GATEWAY6")
-
-    ADDRESS=$(get_iface_var "ADDRESS")
-    [ -z "$ADDRESS" ] && continue
-
-    DEV=$(get_dev_from_pci "$ADDRESS")
-    [ -z "$DEV" ] && continue
-
-    # MAC
-    ip link set dev $DEV address $MAC
-    ip link set dev $DEV up
-
-    # MTU
-    if [ -n "$MTU" ]; then
-        ip link set dev $DEV mtu $MTU
-    fi
-
-    # VLAN (802.1Q)
-    if [ -n "$VLAN_ID" ]; then
-        ip link add link $DEV name $DEV.$VLAN_ID type vlan id $VLAN_ID
-        ip link set dev $DEV.$VLAN_ID up
-        DEV=$DEV.$VLAN_ID
-    fi
-
-    # IPv4
-    if [ -n "$IP" ]; then
-        ip address add $IP/$MASK dev $DEV
-
-        if [ -n "$GATEWAY" ]; then
-            ip route add default via $GATEWAY dev $DEV ${METRIC:+metric ${METRIC}}
-        fi
-    fi
-
-    # IPv6
-    if [ -n "$IP6" ]; then
-        ip -6 address add $IP6/$IP6_PREFIX_LENGTH dev $DEV
-
-        if [ -n "$IP6_ULA" ]; then
-            ip -6 address add $IP6_ULA/64 dev $DEV
-        fi
-
-        if [ -n "$GATEWAY6" ]; then
-            ip -6 route add default via $GATEWAY6 dev $DEV
-        fi
-    fi
-done

one-context.d/loc-11-dns

@@ -1,63 +0,0 @@
-#!/usr/bin/env bash
-
-# -------------------------------------------------------------------------- #
-# Copyright 2002-2020, OpenNebula Project, OpenNebula Systems                #
-#                                                                            #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
-# not use this file except in compliance with the License. You may obtain    #
-# a copy of the License at                                                   #
-#                                                                            #
-# http://www.apache.org/licenses/LICENSE-2.0                                 #
-#                                                                            #
-# Unless required by applicable law or agreed to in writing, software        #
-# distributed under the License is distributed on an "AS IS" BASIS,          #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-# See the License for the specific language governing permissions and        #
-# limitations under the License.                                             #
-#--------------------------------------------------------------------------- #
-
-export DNS_VARIABLES="DNS $(env | sed 's/=.*$//' | grep -E '^ETH[0-9]+_DNS$' | sort)"
-
-export SEARCH_VARIABLES="SEARCH_DOMAIN $(env | sed 's/=.*$//' | grep -E '^ETH[0-9]+_SEARCH_DOMAIN$' | sort)"
-
-nameservers=$(
-    for var in ${DNS_VARIABLES}; do
-        value=$(eval "echo \"\${$var}\"")
-        if [ -n "$value" ]; then
-            echo "$value"
-        fi
-    done
-)
-
-searchdomains=$(
-    for var in ${SEARCH_VARIABLES}; do
-        value=$(eval "echo \"\${$var}\"")
-        if [ -n "$value" ]; then
-            echo "$value"
-        fi
-    done
-)
-
-[ -z "$nameservers" ] && exit 0
-
-if [ -L /etc/resolv.conf ]; then
-    unlink /etc/resolv.conf
-else
-    echo -n '' > /etc/resolv.conf
-fi
-
-for nameserver in $nameservers; do
-    echo nameserver $nameserver >> /etc/resolv.conf
-done
-
-if [ -f /etc/sysconfig/network/config ]; then
-    sed -i "/^NETCONFIG_DNS_STATIC_SERVERS=/ s/=.*$/=\"$nameservers\"/" /etc/sysconfig/network/config
-fi
-
-[ -z "$searchdomains" ] && exit 0
-
-echo search $searchdomains >> /etc/resolv.conf
-
-if [ -f /etc/sysconfig/network/config ]; then
-    sed -i "/^NETCONFIG_DNS_STATIC_SEARCHLIST=/ s/=.*$/=\"$searchdomains\"/" /etc/sysconfig/network/config
-fi

one-context.d/loc-14-mount-swap

@@ -1,30 +0,0 @@
-#!/usr/bin/env bash
-
-# -------------------------------------------------------------------------- #
-# Copyright 2002-2020, OpenNebula Project, OpenNebula Systems                #
-#                                                                            #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
-# not use this file except in compliance with the License. You may obtain    #
-# a copy of the License at                                                   #
-#                                                                            #
-# http://www.apache.org/licenses/LICENSE-2.0                                 #
-#                                                                            #
-# Unless required by applicable law or agreed to in writing, software        #
-# distributed under the License is distributed on an "AS IS" BASIS,          #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-# See the License for the specific language governing permissions and        #
-# limitations under the License.                                             #
-#--------------------------------------------------------------------------- #
-
-activate_swaps_linux() {
-    SWAP_DRIVES=$(blkid -t TYPE="swap" -o device)
-    for SWAP in $SWAP_DRIVES ; do
-        if [ -z "$(swapon -s | grep $SWAP)" ]; then
-            swapon $SWAP
-        fi
-    done
-}
-
-if [ "$(uname -s)" = 'Linux' ]; then
-    activate_swaps_linux
-fi

one-context.d/loc-16-gen-env

@@ -1,49 +0,0 @@
-#!/usr/bin/env bash
-
-# -------------------------------------------------------------------------- #
-# Copyright 2002-2020, OpenNebula Project, OpenNebula Systems                #
-#                                                                            #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
-# not use this file except in compliance with the License. You may obtain    #
-# a copy of the License at                                                   #
-#                                                                            #
-# http://www.apache.org/licenses/LICENSE-2.0                                 #
-#                                                                            #
-# Unless required by applicable law or agreed to in writing, software        #
-# distributed under the License is distributed on an "AS IS" BASIS,          #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-# See the License for the specific language governing permissions and        #
-# limitations under the License.                                             #
-#--------------------------------------------------------------------------- #
-
-ENV_FILE=/var/run/one-context/one_env
-MOUNT_DIR=${MOUNT_DIR:-/mnt}
-TOKENTXT=$(cat "${MOUNT_DIR}/token.txt")
-
-if [ -n "$ONEGATE_TOKEN" ]; then
-    TOKENTXT="$ONEGATE_TOKEN"
-fi
-
-umask 0377
-echo "export TOKENTXT=\"$TOKENTXT\"" > $ENV_FILE
-echo "export VMID=\"$VMID\"" >> $ENV_FILE
-echo "export ONEGATE_ENDPOINT=\"$ONEGATE_ENDPOINT\"" >> $ENV_FILE
-
-function export_rc_vars
-{
-  if [ -f $1 ] ; then
-    ONE_VARS=$(cat $1 | egrep -e '^[a-zA-Z\-\_0-9]*=' | sed 's/=.*$//')
-
-    . $1
-
-    for v in $ONE_VARS; do
-        echo "export $v=\"${!v}\"" >> $ENV_FILE
-    done
-  fi
-}
-
-export_rc_vars ${CONTEXT_FILE}
-
-chown root:root $ENV_FILE
-chmod 0400 $ENV_FILE
-

one-context.d/loc-20-set-username-password

@@ -1,102 +0,0 @@
-#!/usr/bin/env bash
-
-# -------------------------------------------------------------------------- #
-# Copyright 2002-2020, OpenNebula Project, OpenNebula Systems                #
-#                                                                            #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
-# not use this file except in compliance with the License. You may obtain    #
-# a copy of the License at                                                   #
-#                                                                            #
-# http://www.apache.org/licenses/LICENSE-2.0                                 #
-#                                                                            #
-# Unless required by applicable law or agreed to in writing, software        #
-# distributed under the License is distributed on an "AS IS" BASIS,          #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-# See the License for the specific language governing permissions and        #
-# limitations under the License.                                             #
-#--------------------------------------------------------------------------- #
-
-# defaults
-USERNAME=${USERNAME:-root}
-USERNAME_SUDO=${USERNAME_SUDO:-${GRANT_SUDO:-YES}}
-USERNAME_SUDO=$(echo "${USERNAME_SUDO}" | tr '[:lower:]' '[:upper:]')
-USERNAME_PASSWORD_RESET=${USERNAME_PASSWORD_RESET:-NO}
-USERNAME_PASSWORD_RESET=$(echo "${USERNAME_PASSWORD_RESET}" | tr '[:lower:]' '[:upper:]')
-
-_kernel="$(uname -s)"
-case "${_kernel}" in
-    'FreeBSD')
-        USERNAME_SHELL=${USERNAME_SHELL:-/usr/local/bin/bash}
-        _sudoers_file='/usr/local/etc/sudoers.d/one-context'
-        ;;
-    *)
-        USERNAME_SHELL=${USERNAME_SHELL:-/bin/bash}
-        _sudoers_file='/etc/sudoers.d/one-context'
-        ;;
-esac
-
-# create user if missing
-if ! getent passwd "${USERNAME}" > /dev/null 2>&1; then
-    if [ "${_kernel}" = 'FreeBSD' ]; then
-        pw user add "${USERNAME}" -m -s "${USERNAME_SHELL}" -w no
-    else
-        useradd -m "${USERNAME}" -p '*' -s "${USERNAME_SHELL}"
-    fi
-fi
-
-# enable sudo
-if [ "${USERNAME_SUDO}" == "YES" ] && [ "${USERNAME}" != "root" ]; then
-    echo "${USERNAME} ALL=(ALL) NOPASSWD:ALL" >"${_sudoers_file}"
-    chmod 0440 "${_sudoers_file}"
-elif [ -f "${_sudoers_file}" ]; then
-    unlink "${_sudoers_file}"
-fi
-
-# set password
-if [ -n "${CRYPTED_PASSWORD_BASE64}" ]; then
-    CRYPTED_PASSWORD=$(echo $CRYPTED_PASSWORD_BASE64 | base64 -d)
-    if [ "${_kernel}" = 'FreeBSD' ]; then
-        echo "${CRYPTED_PASSWORD}" | pw user mod "${USERNAME}" -H 0
-    else
-        usermod -p "${CRYPTED_PASSWORD}" "${USERNAME}"
-    fi
-elif [ -n "${PASSWORD_BASE64}" ]; then
-    PASSWORD=$(echo $PASSWORD_BASE64 | base64 -d)
-    if [ "${_kernel}" = 'FreeBSD' ]; then
-        echo $PASSWORD | pw user mod "${USERNAME}" -h 0
-    else
-        chpasswd <<< "${USERNAME}:${PASSWORD}"
-    fi
-
-    if [ $? -ne 0 ]; then
-        passwd "${USERNAME}" <<EOF
-${PASSWORD}
-${PASSWORD}
-EOF
-  fi
-elif [ -n "${CRYPTED_PASSWORD}" ]; then
-    if [ "${_kernel}" = 'FreeBSD' ]; then
-        echo $CRYPTED_PASSWORD | pw user mod "${USERNAME}" -H 0
-    else
-        usermod -p "${CRYPTED_PASSWORD}" "${USERNAME}"
-    fi
-elif [ -n "${PASSWORD}" ]; then
-    if [ "${_kernel}" = 'FreeBSD' ]; then
-        echo $PASSWORD | pw user mod "${USERNAME}" -h 0
-    else
-        chpasswd <<< "${USERNAME}:${PASSWORD}"
-    fi
-
-    if [ $? -ne 0 ]; then
-        passwd "${USERNAME}" <<EOF
-${PASSWORD}
-${PASSWORD}
-EOF
-  fi
-elif [ "${USERNAME_PASSWORD_RESET}" = 'YES' ]; then
-    if [ "${_kernel}" = 'FreeBSD' ]; then
-        pw user mod "${USERNAME}" -w no
-    else
-        usermod -p '*' "${USERNAME}"
-    fi
-fi

one-context.d/loc-22-ssh_public_key

@@ -1,67 +0,0 @@
-#!/usr/bin/env bash
-
-# -------------------------------------------------------------------------- #
-# Copyright 2002-2020, OpenNebula Project, OpenNebula Systems                #
-#                                                                            #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
-# not use this file except in compliance with the License. You may obtain    #
-# a copy of the License at                                                   #
-#                                                                            #
-# http://www.apache.org/licenses/LICENSE-2.0                                 #
-#                                                                            #
-# Unless required by applicable law or agreed to in writing, software        #
-# distributed under the License is distributed on an "AS IS" BASIS,          #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-# See the License for the specific language governing permissions and        #
-# limitations under the License.                                             #
-#--------------------------------------------------------------------------- #
-
-[ -z "${SSH_PUBLIC_KEY}${EC2_PUBLIC_KEY}" ] && exit 0
-
-if [ -z "${USERNAME}" ]
-then
-    USERNAME=root
-fi
-
-# Get user $HOME directory
-USER_HOME=$(getent passwd "${USERNAME}" | awk -F':' '{print $6}')
-
-if [ -n "${USER_HOME}" ]
-then
-    AUTH_DIR="${USER_HOME}/.ssh"
-else
-    # Fallback on root
-    AUTH_DIR="/root/.ssh"
-fi
-
-AUTH_FILE="$AUTH_DIR/authorized_keys"
-
-function add_keys {
-    while read key; do
-        if ! grep -q -F "$key" $AUTH_FILE; then
-            echo "$key" >> $AUTH_FILE
-        fi
-    done
-}
-
-[ -z "${SSH_PUBLIC_KEY}${EC2_PUBLIC_KEY}" ] && exit 0
-
-mkdir -m0700 -p $AUTH_DIR
-
-[ ! -f $AUTH_FILE ] && touch $AUTH_FILE
-
-if [ -n "$SSH_PUBLIC_KEY" ]; then
-    echo "$SSH_PUBLIC_KEY" | add_keys
-fi
-
-if [ -n "$EC2_PUBLIC_KEY" ]; then
-    echo "$EC2_PUBLIC_KEY" | add_keys
-fi
-
-chown "${USERNAME}": ${AUTH_DIR} ${AUTH_FILE}
-chmod 600 $AUTH_FILE
-
-# restore SELinux contexts
-if which restorecon &>/dev/null; then
-    restorecon -R -v "${AUTH_DIR}"
-fi

one-context.d/loc-30-console

@@ -1,22 +0,0 @@
-#!/usr/bin/env bash
-
-# -------------------------------------------------------------------------- #
-# Copyright 2002-2020, OpenNebula Project, OpenNebula Systems                #
-#                                                                            #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
-# not use this file except in compliance with the License. You may obtain    #
-# a copy of the License at                                                   #
-#                                                                            #
-# http://www.apache.org/licenses/LICENSE-2.0                                 #
-#                                                                            #
-# Unless required by applicable law or agreed to in writing, software        #
-# distributed under the License is distributed on an "AS IS" BASIS,          #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-# See the License for the specific language governing permissions and        #
-# limitations under the License.                                             #
-#--------------------------------------------------------------------------- #
-
-# Linux
-for _dev_tty in $(find /dev -type c -name 'tty[0-9]*'); do
-    TERM=linux setterm -blank 0 -powerdown 0 >>"${_dev_tty}"
-done

one-context.d/loc-35-securetty

@@ -1,55 +0,0 @@
-#!/usr/bin/env bash
-
-# -------------------------------------------------------------------------- #
-# Copyright 2002-2020, OpenNebula Project, OpenNebula Systems                #
-#                                                                            #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
-# not use this file except in compliance with the License. You may obtain    #
-# a copy of the License at                                                   #
-#                                                                            #
-# http://www.apache.org/licenses/LICENSE-2.0                                 #
-#                                                                            #
-# Unless required by applicable law or agreed to in writing, software        #
-# distributed under the License is distributed on an "AS IS" BASIS,          #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-# See the License for the specific language governing permissions and        #
-# limitations under the License.                                             #
-#--------------------------------------------------------------------------- #
-
-_pam_file="/etc/pam.d/login"
-if [ ! -f "${_pam_file}" ]; then
-    exit 0
-fi
-
-_kernel="$(uname -s)"
-if [ "${_kernel}" = 'FreeBSD' ]; then
-    SED_I="sed -i ''"
-else
-    SED_I="sed -i''"
-fi
-
-### Defaults
-
-# By default, disable pam_securetty in the containers.
-# For virtualized machines, have the securetty enabled.
-if grep -qia 'container=' /proc/1/environ 2>/dev/null; then
-    SECURETTY=${SECURETTY:-NO}
-fi
-
-SECURETTY=${SECURETTY:-YES}
-SECURETTY=${SECURETTY^^}
-
-###
-
-_note='# one-contextd'
-
-if [ "${SECURETTY}" = 'YES' ]; then
-    if grep -qE "^#.*pam_securetty.*${_note}" "${_pam_file}"; then
-        eval "${SED_I} -e 's/^#\([^#]*\)${_note}.*$/\1/' -e 's/[[:space:]]*$//' \"${_pam_file}\""
-    fi
-
-elif [ "${SECURETTY}" = 'NO' ]; then
-    if grep -qE '^[^#]*pam_securetty' "${_pam_file}"; then
-        eval "${SED_I} -e 's/^\([^#]*pam_securetty.*\)$/#\1  ${_note}/' \"${_pam_file}\""
-    fi
-fi

one-context.d/net-15-hostname

@@ -1,164 +0,0 @@
-#!/usr/bin/env bash
-
-# -------------------------------------------------------------------------- #
-# Copyright 2002-2020, OpenNebula Project, OpenNebula Systems                #
-#                                                                            #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
-# not use this file except in compliance with the License. You may obtain    #
-# a copy of the License at                                                   #
-#                                                                            #
-# http://www.apache.org/licenses/LICENSE-2.0                                 #
-#                                                                            #
-# Unless required by applicable law or agreed to in writing, software        #
-# distributed under the License is distributed on an "AS IS" BASIS,          #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-# See the License for the specific language governing permissions and        #
-# limitations under the License.                                             #
-#--------------------------------------------------------------------------- #
-
-_kernel="$(uname -s)"
-if [ "${_kernel}" = 'FreeBSD' ]; then
-    SED_I="sed -i ''"
-else
-    SED_I="sed -i''"
-fi
-
-function set_hostname() {
-    local hostname=$1
-
-    if [ -d /run/systemd/system/ ] && hostnamectl status >/dev/null 2>/dev/null; then
-        hostnamectl set-hostname --static "${hostname}"
-    else
-        if [ -f /etc/sysconfig/network ]; then
-            eval "${SED_I} '/^HOSTNAME=.*$/d' /etc/sysconfig/network"
-            echo "HOSTNAME=${hostname}" >>/etc/sysconfig/network
-        elif [ "${_kernel}" = 'FreeBSD' ]; then
-            sysrc hostname="${hostname}"
-        else
-            echo "${hostname}" >/etc/hostname
-        fi
-
-        hostname "${hostname}"
-    fi
-}
-
-function set_domainname() {
-    domain=$1
-    eval "${SED_I} -e '/^domain .*/d' /etc/resolv.conf"
-    echo "domain ${domain}" >>/etc/resolv.conf
-}
-
-function get_first_ip() {
-    local ip
-
-    ip=${ip:-$(ip route get 1 2>/dev/null | grep 'src [0-9\.]\+' | head -1 | sed -e 's/^.*src \([0-9\.]*\).*$/\1/')}
-    ip=${ip:-$(ip -4 address show scope global up 2>/dev/null | awk '/inet / { gsub(/\/[^\/]+$/, "", $2); print $2; exit}')}
-    ip=${ip:-$(ifconfig 2>/dev/null | awk '/inet / { gsub(/\/[^\/]+$/, "", $2); print $2; exit}')}
-    ip=${ip:-$(hostname -I 2>/dev/null | cut -d' ' -f1)}
-    ip=${ip:-$(hostname -i 2>/dev/null)}
-
-    echo "${ip}"
-}
-
-function get_dns_name() {
-    text=$(LC_ALL=C host "$1" 2>/dev/null)
-    [ $? = 0 ] || exit 0
-    [[ $text == *"has no PTR record" ]] && exit 0
-    name=$(echo "$text" | awk '/(has address|name pointer)/ {print $(NF)}' | sed 's/\.$//')
-    echo $name
-}
-
-function update_hosts() {
-    ip=$1
-    name=$2
-    hostname=$3
-
-    if [ "x${hostname}" = "x${name}" ]; then
-        hosts="${name}"
-    else
-        hosts="${name} ${hostname}"
-    fi
-
-    note='# one-contextd'
-    entry="${ip} ${hosts}  ${note}"
-
-    # update our old entry
-    if grep -qi "${note}" /etc/hosts; then
-        eval "${SED_I} -e \"s/^.*${note}\$/${entry}/\" /etc/hosts"
-    # update entry with same IP (but not localhost)
-    elif grep -E "^${ip}[[:space:]]" /etc/hosts | grep -qv localhost; then
-        eval "${SED_I} -e \"/localhost/! s/^${ip}[[:space:]].*\$/${entry}/\" /etc/hosts"
-    # update entry with same name
-    elif grep -qE "[[:space:]]${name}([[:space:]]|#|\$)" /etc/hosts; then
-        eval "${SED_I} -re \"s/^.*[[:space:]]${name}([[:space:]#].*|$)/${entry}/\" /etc/hosts"
-    # create new entry
-    elif [ -f /etc/hosts ]; then
-        # In FreeBSD, sed doesn't interpret \n. We put a real newline.
-        eval "${SED_I} -e \"1s/^/${entry}\"$'\\\\\n/' /etc/hosts"
-    else
-        echo "${entry}" >>/etc/hosts
-    fi
-}
-
-#####
-
-first_ip=$(get_first_ip)
-
-if [ -n "$SET_HOSTNAME" ]; then
-    name=$(echo "$SET_HOSTNAME" | \
-        sed -e 's/[^-a-zA-Z0-9\.]/-/g' -e 's/^-*//g' -e 's/-*$//g')
-
-elif [ -n "$DNS_HOSTNAME" ]; then
-    name=$(get_dns_name "${first_ip}")
-
-elif [ "${EC2_HOSTNAME}" = 'YES' ]; then
-    # try to quickly get hostname from the EC2 metadata server or
-    # create hostname based on the first IPv4 (format: "ip-1-2-3-4")
-    name=$(curl -sf -m 5 'http://169.254.169.254/latest/meta-data/local-hostname' 2>/dev/null)
-    if [ -z "${name}" ]; then
-        name="$(echo "${first_ip}" | grep -x '[0-9\.]\+' | tr . -)"
-        if [ -n "${name}" ]; then
-            name="ip-${name}"
-        fi
-    fi
-fi
-
-if [ -n "${name}" ]; then
-    # split host and domain names
-    hostname=${name%%.*}
-    domain=${name#*.}
-    if [ "x${domain}" = "x${hostname}" ]; then
-        domain=''
-    fi
-
-    # FreeBSD
-    if [ "${_kernel}" = 'FreeBSD' ]; then
-        set_hostname "${name}"
-    else
-        set_hostname "${hostname}"
-    fi
-
-    if [ -n "${domain}" ]; then
-        set_domainname "${domain}"
-    fi
-
-    if [ -n "${DNS_HOSTNAME}" ]; then
-        host_ip=$first_ip
-    else
-        # If selected hostname resolves on first IP,
-        # use first IP for local hostname in /etc/hosts.
-        # Otherwise use loopback IP.
-        name_ip=$(get_dns_name "${name}")
-        if [ "x${first_ip}" = "x${name_ip}" ]; then
-            host_ip=$first_ip
-        elif [ -f /etc/debian_version ]; then
-            host_ip='127.0.1.1'
-        else
-            host_ip='127.0.0.1'
-        fi
-    fi
-
-    if [ -n "${host_ip}" ]; then
-        update_hosts "${host_ip}" "${name}" "${hostname}"
-    fi
-fi

one-context.d/net-97-start-script

@@ -1,40 +0,0 @@
-#!/usr/bin/env bash
-
-# -------------------------------------------------------------------------- #
-# Copyright 2002-2020, OpenNebula Project, OpenNebula Systems                #
-#                                                                            #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
-# not use this file except in compliance with the License. You may obtain    #
-# a copy of the License at                                                   #
-#                                                                            #
-# http://www.apache.org/licenses/LICENSE-2.0                                 #
-#                                                                            #
-# Unless required by applicable law or agreed to in writing, software        #
-# distributed under the License is distributed on an "AS IS" BASIS,          #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-# See the License for the specific language governing permissions and        #
-# limitations under the License.                                             #
-#--------------------------------------------------------------------------- #
-
-MOUNT_DIR=${MOUNT_DIR:-/mnt}
-TMP_DIR=$(mktemp -d "/tmp/one-context.XXXXXX")
-TMP_FILE="${TMP_DIR}/one-start-script"
-START_SCRIPT_AVAILABLE=no
-
-chmod 700 "${TMP_DIR}"
-
-if [ -n "$START_SCRIPT_BASE64" ]; then
-    echo "${START_SCRIPT_BASE64}" | base64 -d > $TMP_FILE
-    START_SCRIPT_AVAILABLE=yes
-elif [ -n "$START_SCRIPT" ]; then
-    echo "${START_SCRIPT}" > $TMP_FILE
-    START_SCRIPT_AVAILABLE=yes
-fi
-
-if [ "$START_SCRIPT_AVAILABLE" = "yes" ]; then
-    cd $MOUNT_DIR
-    chmod +x $TMP_FILE
-    $TMP_FILE
-fi
-
-rm -rf "${TMP_DIR}"

one-context.d/net-98-execute-scripts

@@ -1,38 +0,0 @@
-#!/usr/bin/env bash
-
-# -------------------------------------------------------------------------- #
-# Copyright 2002-2020, OpenNebula Project, OpenNebula Systems                #
-#                                                                            #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
-# not use this file except in compliance with the License. You may obtain    #
-# a copy of the License at                                                   #
-#                                                                            #
-# http://www.apache.org/licenses/LICENSE-2.0                                 #
-#                                                                            #
-# Unless required by applicable law or agreed to in writing, software        #
-# distributed under the License is distributed on an "AS IS" BASIS,          #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-# See the License for the specific language governing permissions and        #
-# limitations under the License.                                             #
-#--------------------------------------------------------------------------- #
-
-MOUNT_DIR=${MOUNT_DIR:-/mnt}
-TMP_DIR=$(mktemp -d "/tmp/one-context.XXXXXX")
-
-chmod 700 "${TMP_DIR}"
-
-if [ -z "$INIT_SCRIPTS" ]; then
-    if [ -f "$MOUNT_DIR/init.sh" ]; then
-        INIT_SCRIPTS=init.sh
-    fi
-fi
-
-cd $MOUNT_DIR
-
-for f in $INIT_SCRIPTS; do
-    cp "$f" "${TMP_DIR}/"
-    chmod +x $TMP_DIR/$f
-    $TMP_DIR/$f
-done
-
-rm -rf "${TMP_DIR}"

one-context.d/net-99-report-ready

@@ -1,62 +0,0 @@
-#!/usr/bin/env bash
-
-# -------------------------------------------------------------------------- #
-# Copyright 2002-2020, OpenNebula Project, OpenNebula Systems                #
-#                                                                            #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
-# not use this file except in compliance with the License. You may obtain    #
-# a copy of the License at                                                   #
-#                                                                            #
-# http://www.apache.org/licenses/LICENSE-2.0                                 #
-#                                                                            #
-# Unless required by applicable law or agreed to in writing, software        #
-# distributed under the License is distributed on an "AS IS" BASIS,          #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-# See the License for the specific language governing permissions and        #
-# limitations under the License.                                             #
-#--------------------------------------------------------------------------- #
-
-ENV_FILE=${ENV_FILE:-/var/run/one-context/one_env}
-
-if [ "$REPORT_READY" != "YES" ]; then
-    exit 0
-fi
-
-# $TOKENTXT is available only through the env. file
-if [ -f "${ENV_FILE}" ]; then
-    . "${ENV_FILE}"
-fi
-
-###
-
-if which curl >/dev/null 2>&1; then
-    curl -X "PUT" "${ONEGATE_ENDPOINT}/vm" \
-        --header "X-ONEGATE-TOKEN: $TOKENTXT" \
-        --header "X-ONEGATE-VMID: $VMID" \
-        --insecure \
-        -d "READY=YES"
-
-    if [ "$?" = "0" ]; then
-        exit 0
-    fi
-fi
-
-if which wget >/dev/null 2>&1; then
-    wget --method=PUT "${ONEGATE_ENDPOINT}/vm" \
-        --body-data="READY=YES" \
-        --header "X-ONEGATE-TOKEN: $TOKENTXT" \
-        --header "X-ONEGATE-VMID: $VMID" \
-        --no-check-certificate
-
-    if [ "$?" = "0" ]; then
-        exit 0
-    fi
-fi
-
-if which onegate >/dev/null 2>&1; then
-    onegate vm update --data "READY=YES"
-
-    if [ "$?" = "0" ]; then
-        exit 0
-    fi
-fi

pam.d/vmtoolsd

@@ -1,5 +0,0 @@
-#%PAM-1.0
-auth       substack     password-auth
-auth       include      postlogin
-account    required     pam_nologin.so
-account    include      password-auth

rc.d/init.d/network

@@ -1,268 +0,0 @@
-#! /bin/bash
-#
-# network       Bring up/down networking
-#
-# chkconfig: - 10 90
-# description: Activates/Deactivates all network interfaces configured to \
-#              start at boot time.
-#
-### BEGIN INIT INFO
-# Provides: $network
-# Should-Start: iptables ip6tables NetworkManager-wait-online NetworkManager $network-pre
-# Short-Description: Bring up/down networking
-# Description: Bring up/down networking
-### END INIT INFO
-
-# Source function library.
-. /etc/init.d/functions
-
-if [ ! -f /etc/sysconfig/network ]; then
-    exit 6
-fi
-
-. /etc/sysconfig/network
-
-if [ -f /etc/sysconfig/pcmcia ]; then
-    . /etc/sysconfig/pcmcia
-fi
-
-
-# Check that networking is up.
-[ "${NETWORKING}" = "no" ] && exit 6
-
-# if the ip configuration utility isn't around we can't function.
-[ -x /sbin/ip ] || exit 1
-
-
-CWD=$(pwd)
-cd /etc/sysconfig/network-scripts
-
-. ./network-functions
-
-# find all the interfaces besides loopback.
-# ignore aliases, alternative configurations, and editor backup files
-interfaces=$(ls ifcfg-* | \
-        LC_ALL=C sed -e "$__sed_discard_ignored_files" \
-               -e '/\(ifcfg-lo$\|:\|ifcfg-.*-range\)/d' \
-               -e '{ s/^ifcfg-//g;s/[0-9]/ &/}' | \
-        LC_ALL=C sort -k 1,1 -k 2n | \
-        LC_ALL=C sed 's/ //')
-rc=0
-
-if ! [ -f /etc/sysconfig/disable-deprecation-warnings ]; then
-    net_log $"You are using 'network' service provided by 'network-scripts', which are now deprecated." warning network >&2
-    net_log $"'network-scripts' will be removed in one of the next major releases of RHEL." warning network >&2
-    net_log $"It is advised to switch to 'NetworkManager' instead for network management." warning network >&2
-
-    # This disables additional warnings during the boot process:
-    export DEPRECATION_WARNING_ISSUED='true'
-fi
-
-# See how we were called.
-case "$1" in
-start)
-    [ "$EUID" != "0" ] && exit 4
-    rc=0
-    # IPv6 hook (pre IPv4 start)
-    if [ -x /etc/sysconfig/network-scripts/init.ipv6-global ]; then
-        /etc/sysconfig/network-scripts/init.ipv6-global start pre
-    fi
-
-    apply_sysctl
-
-    #tell NM to reload its configuration
-    if [ "$(LANG=C nmcli -t --fields running general status 2>/dev/null)" = "running" ]; then
-        nmcli connection reload
-    fi
-
-    # bring up loopback interface
-    action $"Bringing up loopback interface: " ./ifup ifcfg-lo
-
-    case "$VLAN" in
-    yes)
-        if [ ! -d /proc/net/vlan ] && ! modprobe 8021q >/dev/null 2>&1 ; then
-            net_log $"No 802.1Q VLAN support available in kernel."
-        fi
-        ;;
-    esac
-
-    vlaninterfaces=""
-    vpninterfaces=""
-    xdslinterfaces=""
-    bridgeinterfaces=""
-
-    # bring up all other interfaces configured to come up at boot time
-    for i in $interfaces; do
-        unset DEVICE TYPE SLAVE NM_CONTROLLED
-        eval $(LANG=C grep -F "DEVICE=" ifcfg-$i)
-        eval $(LANG=C grep -F "TYPE=" ifcfg-$i)
-        eval $(LANG=C grep -F "SLAVE=" ifcfg-$i)
-        eval $(LANG=C grep -F "NM_CONTROLLED=" ifcfg-$i)
-
-        if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi
-
-        if [ "$SLAVE" = "yes" ] && ( ! is_nm_running || is_false $NM_CONTROLLED ) ; then
-            continue
-        fi
-
-        if [ "${DEVICE##cipcb}" != "$DEVICE" ] ; then
-            vpninterfaces="$vpninterfaces $i"
-            continue
-        fi
-        if [ "$TYPE" = "xDSL"  -o  "$TYPE" = "Modem" ]; then
-            xdslinterfaces="$xdslinterfaces $i"
-            continue
-        fi
-
-        if [ "$TYPE" = "Bridge" ]; then
-            bridgeinterfaces="$bridgeinterfaces $i"
-            continue
-        fi
-        if [ "$TYPE" = "IPSEC" ] || [ "$TYPE" = "IPIP" ] || [ "$TYPE" = "GRE" ]; then
-            vpninterfaces="$vpninterfaces $i"
-            continue
-        fi
-
-        if [ "${DEVICE%%.*}" != "$DEVICE"  -o  "${DEVICE##vlan}" != "$DEVICE" ] ; then
-            vlaninterfaces="$vlaninterfaces $i"
-            continue
-        fi
-
-        if ( . ./ifcfg-"$i" ; is_false "$ONBOOT" ) ; then
-            # this loads the module, to preserve ordering
-            is_available $i
-            continue
-        fi
-        action $"Bringing up interface $i: " ./ifup $i boot
-        [ $? -ne 0 ] && rc=1
-    done
-
-    # Bring up xDSL and VPN interfaces
-    for i in $vlaninterfaces $bridgeinterfaces $xdslinterfaces $vpninterfaces ; do
-        if ( . ./ifcfg-"$i" ; ! is_false "$ONBOOT" ) ; then
-            action $"Bringing up interface $i: " ./ifup $i boot
-            [ $? -ne 0 ] && rc=1
-        fi
-    done
-
-    # Add non interface-specific static-routes.
-    if [ -f /etc/sysconfig/static-routes ]; then
-        if [ -x /sbin/route ]; then
-            grep "^any" /etc/sysconfig/static-routes | while read ignore args ; do
-                /sbin/route add -$args
-            done
-        else
-            net_log $"Legacy static-route support not available: /sbin/route not found"
-        fi
-    fi
-
-    # IPv6 hook (post IPv4 start)
-    if [ -x /etc/sysconfig/network-scripts/init.ipv6-global ]; then
-        /etc/sysconfig/network-scripts/init.ipv6-global start post
-    fi
-    # Run this again to catch any interface-specific actions
-    apply_sysctl
-
-    touch /var/lock/subsys/network
-
-    [ -n "${NETWORKDELAY}" ] && /bin/sleep ${NETWORKDELAY}
-    ;;
-stop)
-    [ "$EUID" != "0" ] && exit 4
-    # Don't shut the network down if root or /usr is on NFS or a network
-    # block device.
-    if systemctl show --property=RequiredBy -- -.mount usr.mount | grep -q 'remote-fs.target' ; then
-        net_log $"rootfs or /usr is on network filesystem, leaving network up"
-        exit 1
-    fi
-
-    # Don't shut the network down when shutting down the system if configured
-    # as such in sysconfig
-    if is_false "$IFDOWN_ON_SHUTDOWN"; then
-      if systemctl is-system-running | grep -q 'stopping'; then
-        net_log $"system is shutting down, leaving interfaces up as requested" info
-        exit 0
-      fi
-    fi
-
-    vlaninterfaces=""
-    vpninterfaces=""
-    xdslinterfaces=""
-    bridgeinterfaces=""
-    remaining=""
-    rc=0
-
-    # get list of bonding, vpn, and xdsl interfaces
-    for i in $interfaces; do
-        unset DEVICE TYPE
-        eval $(LANG=C grep -F "DEVICE=" ifcfg-$i)
-        eval $(LANG=C grep -F "TYPE=" ifcfg-$i)
-
-        if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi
-
-        if [ "${DEVICE##cipcb}" != "$DEVICE" ] ; then
-            vpninterfaces="$vpninterfaces $i"
-            continue
-        fi
-        if [ "$TYPE" = "IPSEC" ] || [ "$TYPE" = "IPIP" ] || [ "$TYPE" = "GRE" ]; then
-            vpninterfaces="$vpninterfaces $i"
-            continue
-        fi
-        if [ "$TYPE" = "Bridge" ]; then
-            bridgeinterfaces="$bridgeinterfaces $i"
-            continue
-        fi
-        if [ "$TYPE" = "xDSL"  -o  "$TYPE" = "Modem" ]; then
-            xdslinterfaces="$xdslinterfaces $i"
-            continue
-        fi
-
-        if [ "${DEVICE%%.*}" != "$DEVICE"  -o  "${DEVICE##vlan}" != "$DEVICE" ] ; then
-            vlaninterfaces="$vlaninterfaces $i"
-            continue
-        fi
-        remaining="$remaining $i"
-    done
-
-    for i in $vpninterfaces $xdslinterfaces $bridgeinterfaces $vlaninterfaces $remaining; do
-        unset DEVICE TYPE
-        (. ./ifcfg-$i
-        if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi
-
-        if ! check_device_down $DEVICE; then
-            action $"Shutting down interface $i: " ./ifdown $i boot
-            [ $? -ne 0 ] && rc=1
-        fi
-        )
-    done
-
-    action $"Shutting down loopback interface: " ./ifdown ifcfg-lo
-
-    sysctl -w net.ipv4.ip_forward=0 > /dev/null 2>&1
-
-    # IPv6 hook (post IPv4 stop)
-    if [ -x /etc/sysconfig/network-scripts/init.ipv6-global ]; then
-        /etc/sysconfig/network-scripts/init.ipv6-global stop post
-    fi
-
-    rm -f /var/lock/subsys/network
-    ;;
-status)
-    echo $"Configured devices:"
-    echo lo $interfaces
-
-    echo $"Currently active devices:"
-    echo $(/sbin/ip -o link show up | awk -F ": " '{ print $2 }')
-    ;;
-restart|force-reload)
-    cd "$CWD"
-    $0 stop
-    $0 start
-    rc=$?
-    ;;
-*)
-    echo $"Usage: $0 {start|stop|status|restart|force-reload}"
-    exit 2
-esac
-
-exit $rc

rc.d/rc0.d/K90network

@@ -1 +0,0 @@
-../init.d/network

rc.d/rc1.d/K90network

@@ -1 +0,0 @@
-../init.d/network

rc.d/rc2.d/S10network

@@ -1 +0,0 @@
-../init.d/network

rc.d/rc3.d/S10network

@@ -1 +0,0 @@
-../init.d/network

rc.d/rc4.d/S10network

@@ -1 +0,0 @@
-../init.d/network

rc.d/rc5.d/S10network

@@ -1 +0,0 @@
-../init.d/network

rc.d/rc6.d/K90network

@@ -1 +0,0 @@
-../init.d/network

sysconfig/network-scripts/ifcfg-lo

@@ -1,9 +0,0 @@
-DEVICE=lo
-IPADDR=127.0.0.1
-NETMASK=255.0.0.0
-NETWORK=127.0.0.0
-# If you're having problems with gated making 127.0.0.0/8 a martian,
-# you can change this to something else (255.255.255.255, for example)
-BROADCAST=127.255.255.255
-ONBOOT=yes
-NAME=loopback

sysconfig/network-scripts/ifdown

@@ -1,77 +0,0 @@
-#!/bin/bash
-
-unset WINDOW # defined by screen, conflicts with our usage
-
-. /etc/init.d/functions
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-[ -f ../network ] && . ../network
-
-CONFIG=$1
-
-[ -z "$CONFIG" ] && {
-    echo $"usage: ifdown <configuration>" >&2
-    exit 1
-}
-
-if ! [ -f /etc/sysconfig/disable-deprecation-warnings ] && ! is_true ${DEPRECATION_WARNING_ISSUED}; then
-    net_log $"You are using 'ifdown' script provided by 'network-scripts', which are now deprecated." warning ifdown >&2
-    net_log $"'network-scripts' will be removed in one of the next major releases of RHEL." warning ifdown >&2
-    net_log $"It is advised to switch to 'NetworkManager' instead - it provides 'ifup/ifdown' scripts as well." warning ifdown >&2
-fi
-
-need_config "${CONFIG}"
-
-[ -f "$CONFIG" ] || {
-    echo $"usage: ifdown <configuration>" >&2
-    exit 1
-}
-
-if [ $UID != 0 ]; then
-    if [ -x /usr/sbin/usernetctl ]; then
-        source_config
-        if /usr/sbin/usernetctl ${CONFIG} report ; then
-            exec /usr/sbin/usernetctl ${CONFIG} down
-        fi
-    fi
-    echo $"Users cannot control this device." >&2
-    exit 1
-fi
-
-source_config
-
-if [ -n "$IN_HOTPLUG" ] && [ "${HOTPLUG}" = "no" -o "${HOTPLUG}" = "NO" ]
-then
-    exit 0
-fi
-
-if [ "$_use_nm" = "true" ]; then
-    if [ -n "$UUID" -a -z "$DEVICE" ]; then
-        DEVICE=$(nmcli -t --fields uuid,device con show --active | awk -F ':' "\$1 == \"$UUID\" { print \$2 }")
-    fi
-    if [ -n "$DEVICE" ] && ! is_nm_device_unmanaged "$DEVICE" ; then
-        if ! LC_ALL=C nmcli -t -f STATE,DEVICE dev status | grep -Eq "^(failed|disconnected|unmanaged|unavailable):$DEVICE$"; then
-            nmcli dev disconnect "$DEVICE"
-            exit $?
-        fi
-        exit 0
-    fi
-fi
-
-if [ -x /sbin/ifdown-pre-local ]; then
-    /sbin/ifdown-pre-local ${DEVICE}
-fi
-
-OTHERSCRIPT="/etc/sysconfig/network-scripts/ifdown-${DEVICETYPE}"
-
-if [ ! -x ${OTHERSCRIPT} ]; then
-    OTHERSCRIPT="/etc/sysconfig/network-scripts/ifdown-${TYPE}"
-fi
-
-if [ ! -x ${OTHERSCRIPT} ]; then
-    OTHERSCRIPT="/etc/sysconfig/network-scripts/ifdown-eth"
-fi
-
-exec ${OTHERSCRIPT} ${CONFIG} $2

sysconfig/network-scripts/ifdown-bnep

@@ -1,49 +0,0 @@
-#! /bin/bash
-
-. /etc/init.d/functions
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-[ -f ../network ] && . ../network
-
-CONFIG=${1}
-
-source_config
-
-# On hotplug events, just bring the virtual device up as if it's normal Ethernet
-if [ -n "$IN_HOTPLUG" ]; then
-    exec /etc/sysconfig/network-scripts/ifdown-eth ${CONFIG} $2
-fi
-
-stop_panu()
-{
-    kill -TERM $(cat /run/pand-${DEVICE}.pid)
-}
-
-stop_nap()
-{
-    kill -TERM $(cat /run/pand-${DEVICE}.pid)
-    /usr/bin/pand -K
-}
-
-stop_gn()
-{
-    :
-}
-
-case "$ROLE" in
-PANU)
-    stop_panu
-    ;;
-NAP)
-    stop_nap
-    ;;
-GN)
-    stop_gn
-    ;;
-*)
-    echo Unknown BNEP mode :$ROLE
-    ;;
-esac
-

sysconfig/network-scripts/ifdown-eth

@@ -1,183 +0,0 @@
-#!/bin/bash
-# Network Interface Configuration System
-# Copyright (c) 1996-2009 Red Hat, Inc. all rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License, version 2,
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-. /etc/init.d/functions
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-[ -f ../network ] && . ../network
-
-CONFIG=${1}
-
-source_config
-
-. /etc/sysconfig/network
-
-# Check to make sure the device is actually up
-check_device_down ${DEVICE} && [ "$BOOTPROTO" != "dhcp" -a "$BOOTPROTO" != "bootp" ] && [ -n "$VLAN" -a "$VLAN" != "yes" ] && exit 0
-
-if [ -n "${TEAM_MASTER}" ] && [ ! "${DEVICETYPE}" = "TeamPort" ] && [ -x ./ifdown-TeamPort ]; then
-    ./ifdown-TeamPort ${CONFIG} $2
-fi
-
-if [ "${SLAVE}" != "yes" -o -z "${MASTER}" ]; then
-    if [ -n "${HWADDR}" -a -z "${MACADDR}" ]; then
-        FOUNDMACADDR=$(get_hwaddr ${REALDEVICE})
-        if [ -n "${FOUNDMACADDR}" -a "${FOUNDMACADDR}" != "${HWADDR}" ]; then
-            NEWCONFIG=$(get_config_by_hwaddr ${FOUNDMACADDR})
-            if [ -n "${NEWCONFIG}" ]; then
-                eval $(LANG=C grep -F "DEVICE=" $NEWCONFIG)
-            else
-                net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring."
-                exit 1
-            fi
-            if [ -n "${NEWCONFIG}" -a "${NEWCONFIG##*/}" != "${CONFIG##*/}" -a "${DEVICE}" = "${REALDEVICE}" ]; then
-                exec /sbin/ifdown ${NEWCONFIG}
-            else
-                net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring."
-                exit 1
-            fi
-        fi
-    fi
-fi
-
-if is_bonding_device ${DEVICE} ; then
-    for device in $(LANG=C grep -l "^[[:space:]]*MASTER=['\"]\?${DEVICE}['\"]\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-*) ; do
-        is_ignored_file "$device" && continue
-        /sbin/ifdown ${device##*/}
-    done
-    for arg in $BONDING_OPTS ; do
-        key=${arg%%=*};
-        [[ "${key}" != "arp_ip_target" ]] && continue
-        value=${arg##*=};
-        if [ "${value:0:1}" != "" ]; then
-            OLDIFS=$IFS;
-            IFS=',';
-            for arp_ip in $value; do
-                if grep -q $arp_ip /sys/class/net/${DEVICE}/bonding/arp_ip_target; then
-                    echo "-$arp_ip" > /sys/class/net/${DEVICE}/bonding/arp_ip_target
-                fi
-            done
-            IFS=$OLDIFS;
-        else
-            value=${value#+};
-            if grep -q $value /sys/class/net/${DEVICE}/bonding/arp_ip_target; then
-                echo "-$value" > /sys/class/net/${DEVICE}/bonding/arp_ip_target
-            fi
-        fi
-    done
-fi
-
-/etc/sysconfig/network-scripts/ifdown-ipv6 ${CONFIG}
-
-retcode=0
-
-for VER in "" 6 ; do
-    if [ -f "/run/dhclient$VER-${DEVICE}.pid" ]; then
-        dhcpid=$(cat /run/dhclient$VER-${DEVICE}.pid)
-        generate_lease_file_name $VER
-        if is_true "$DHCPRELEASE";  then
-            /sbin/dhclient -r -lf ${LEASEFILE} -pf /run/dhclient$VER-${DEVICE}.pid ${DEVICE} >/dev/null 2>&1
-            retcode=$?
-        else
-            kill $dhcpid >/dev/null 2>&1
-            retcode=$?
-            reason=STOP$VER interface=${DEVICE} /sbin/dhclient-script
-        fi
-        if [ -f "/run/dhclient$VER-${DEVICE}.pid" ]; then
-            rm -f /run/dhclient$VER-${DEVICE}.pid
-            kill $dhcpid >/dev/null 2>&1
-        fi  
-    fi
-done
-
-# we can't just delete the configured address because that address
-# may have been changed in the config file since the device was
-# brought up.  Flush all addresses associated with this
-# instance instead.
-if [ -d "/sys/class/net/${REALDEVICE}" ]; then
-    LABEL=
-    if [ "${REALDEVICE}" != "${DEVICE}" ]; then
-        LABEL="label ${DEVICE}"
-    fi
-    if [ "${REALDEVICE}" = "lo" ]; then
-        TIMEOUT=""
-        [ -x /usr/bin/timeout ] && TIMEOUT="/usr/bin/timeout --signal=SIGQUIT 4"
-        $TIMEOUT ip addr flush dev ${REALDEVICE} ${LABEL} scope global 2>/dev/null
-        $TIMEOUT ip addr flush dev ${REALDEVICE} ${LABEL} scope host 2>/dev/null
-    else
-        ip addr flush dev ${REALDEVICE} ${LABEL} scope global 2>/dev/null
-        ip -4 addr flush dev ${REALDEVICE} ${LABEL} scope host 2>/dev/null
-    fi
-
-    if [ "${SLAVE}" = "yes" -a -n "${MASTER}" ]; then
-        echo "-${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null
-    fi
-
-    if [ "${REALDEVICE}" = "${DEVICE}" ]; then
-        ip link set dev ${DEVICE} down 2>/dev/null
-    fi
-fi
-[ "$retcode" = "0" ] && retcode=$?
-
-if [ -n "${BRIDGE}" ]; then
-    ip link set dev ${DEVICE} nomaster down
-    # Upon removing a device from a bridge,
-    # it's necessary to make radvd reload its config
-    [ -r /run/radvd/radvd.pid ] && kill -HUP $(cat /run/radvd/radvd.pid)
-    if [ -d /sys/class/net/${BRIDGE}/brif ] && [ $(ls -1 /sys/class/net/${BRIDGE}/brif | wc -l) -eq 0 ]; then
-        ip link del ${BRIDGE}
-    fi
-fi
-
-if [ "${TYPE}" = "Tap" ]; then
-    TUNMODE="mode tap"
-    [[ ${DEVICE} == tun* ]] && TUNMODE="mode tun"
-    ip tuntap del ${TUNMODE} dev ${DEVICE} >/dev/null
-fi
-
-if [ -n "${TEAM_CONFIG}" ] && [ ! "${DEVICETYPE}" = "Team" ] && [ -x ./ifdown-Team ]; then
-    ./ifdown-Team ${CONFIG} $2
-fi
-
-# wait up to 5 seconds for device to actually come down...
-waited=0
-while ! check_device_down ${DEVICE} && [ "$waited" -lt 50 ] ; do
-    sleep 0.01
-    waited=$(($waited+1))
-done
-
-# don't leave an outdated key sitting around
-if [ -n "${WIRELESS_ENC_KEY}" ] && [ -x /sbin/iwconfig ]; then
-    /sbin/iwconfig ${DEVICE} enc 0 >/dev/null 2>&1
-fi
-
-if [ "$retcode" = 0 ] ; then
-    /etc/sysconfig/network-scripts/ifdown-post $CONFIG
-    # do NOT use $? because ifdown should return whether or not
-    # the interface went down.
-fi
-
-if [ -n "$VLAN" ]; then
-    # 802.1q VLAN
-    if [ -f /proc/net/vlan/${DEVICE} ]; then
-        ip link delete ${DEVICE} type vlan
-    fi
-fi
-
-exit $retcode

sysconfig/network-scripts/ifdown-ippp

@@ -1,34 +0,0 @@
-#! /bin/sh
-
-PATH=/sbin:/usr/sbin:/bin:/usr/bin 
-
-# Get global network configuration
-[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
-
-CONFIG=$1
-
-. ./$CONFIG
-
-# stopping ibod daemon for channel bundling
-if [ -f /var/lock/subsys/ibod ] ; then
-    kill -9  $(pidof ibod) >/dev/null 2>&1
-    rm -f /var/lock/subsys/ibod
-fi
-
-# Shut down IPv6
-/etc/sysconfig/network-scripts/ifdown-ipv6 $CONFIG
-
-# shutdown isdn device
-isdnctrl hangup $DEVICE >/dev/null 2>&1
-sleep 1
-ip link set dev $DEVICE down >/dev/null 2>&1
-
-# delete isdn device
-isdnctrl delif $DEVICE >/dev/null 2>&1
-
-# kill ipppd daemon
-if [ -f /run/ipppd.$DEVICE.pid ] ; then
-    pppdpid=$(cat /run/ipppd.$DEVICE.pid)
-    kill -9 $pppdpid > /dev/null 2>&1
-    rm -f /run/ipppd.$DEVICE.pid > /dev/null 2>&1
-fi

sysconfig/network-scripts/ifdown-ipv6

@@ -1,139 +0,0 @@
-#!/bin/sh
-#
-# ifdown-ipv6
-#
-#
-# Taken from:
-# (P) & (C) 2000-2004 by Peter Bieringer <pb@bieringer.de>
-#
-#  You will find more information on the initscripts-ipv6 homepage at
-#   http://www.deepspace6.net/projects/initscripts-ipv6.html
-#
-# RHL integration assistance by Pekka Savola <pekkas@netcore.fi>
-#
-# Version 2005-09-22
-#
-# Note: if called as (like normally) by /etc/sysconfig/network-scripts/ifdown
-#        exit codes aren't handled by "ifdown"
-#
-# Uses following information from /etc/sysconfig/network-scripts/ifcfg-$1:
-#  DEVICE=<device>
-#  IPV6INIT=yes|no: controls IPv6 configuration for this interface
-#
-# Optional for 6to4 tunneling:
-#  IPV6TO4_RELAY=<IPv4 address>: IPv4 address of the remote 6to4 relay [default: 192.88.99.1]
-#  IPV6TO4_ROUTING="<device>-<suffix>/<prefix length> ...": information to setup internal interfaces
-#
-# Optional for 6to4 tunneling links to trigger radvd:
-#  IPV6_CONTROL_RADVD=yes|no: controls radvd triggering [optional]
-#  IPV6_RADVD_PIDFILE=<file>: PID file of radvd for sending signals, default is "/run/radvd/radvd.pid" [optional]
-#  IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd [optional, default is SIGHUP]
-#
-#  Required version of radvd to use 6to4 prefix recalculation
-#   0.6.2p3 or newer supporting option "Base6to4Interface"
-#  Required version of radvd to use dynamic ppp links
-#   0.7.0 + fixes or newer
-#
-
-
-. /etc/sysconfig/network
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-CONFIG=$1
-[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
-source_config
-
-REALDEVICE=${DEVICE%%:*}
-DEVICE=$REALDEVICE
-
-[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1
-. /etc/sysconfig/network-scripts/network-functions-ipv6
-
-
-# IPv6 test, no module loaded, exit if system is not IPv6-ready
-ipv6_test testonly || exit 0
-
-# Test device status
-ipv6_test_device_status $DEVICE
-if [ $? != 0 -a $? != 11 ]; then
-    # device doesn't exist or other problem occurs
-    exit 1
-fi
-
-if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then
-    # Switch some sysctls to secure mode
-    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=0 >/dev/null 2>&1
-    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=0 >/dev/null 2>&1
-    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=0 >/dev/null 2>&1
-fi
-/sbin/ip link set $DEVICE addrgenmode eui64 >/dev/null 2>&1
-
-# Test status of tun6to4 device
-ipv6_test_device_status tun6to4
-if [ $? = 0 -o $? = 11 ]; then
-    # Device exists
-    valid6to4config="yes"
-
-    if [ -z "$IPV6TO4_RELAY" ]; then
-        IPV6TO4_RELAY="192.88.99.1"
-    fi
-
-    # Get IPv4 address from interface
-    if [ -n "$IPV6TO4_IPV4ADDR" ]; then
-        # Take special configured from config file (precedence 1)
-        ipv4addr="$IPV6TO4_IPV4ADDR"
-
-        # Get IPv4 address from interface first
-        ipv4addrlocal="$(ipv6_get_ipv4addr_of_device $DEVICE)"
-        if [ -z "$ipv4addrlocal" ]; then
-            # Take configured from config file
-            ipv4addrlocal="$IPADDR"
-        fi
-    else
-        # Get IPv4 address from interface first (has precedence 2)
-        ipv4addr="$(ipv6_get_ipv4addr_of_device $DEVICE)"
-        if [ -z "$ipv4addr" ]; then
-            # Take configured from config file (precedence 3)
-            ipv4addr="$IPADDR"
-        fi
-        ipv4addrlocal="$ipv4addr"
-    fi
-
-    # Get local IPv4 address of dedicated tunnel
-    ipv4addr6to4local="$(ipv6_get_ipv4addr_of_tunnel tun6to4 local)"
-
-    if [ -z "$ipv4addrlocal" -o -z "$ipv4addr6to4local" ]; then
-        # no IPv4 addresses given, 6to4 sure not configured
-        valid6to4config="no"
-    else
-        # Check against configured 6to4 tunnel to see if this interface was
-        # used before
-        if [ "$ipv4addrlocal" != "$ipv4addr6to4local" ]; then
-            # IPv4 address of interface does't match local tunnel address,
-            # interface was not used for current 6to4 setup
-            valid6to4config="no"
-        fi
-    fi
-fi
-
-# Shutdown of 6to4, if configured
-if [ "$valid6to4config" = "yes" ]; then
-    if [ -n "$IPV6TO4_ROUTING" ]; then
-        # Delete routes to local networks
-        for devsuf in $IPV6TO4_ROUTING; do
-            dev="${devsuf%%-*}"
-            ipv6_cleanup_6to4_device $dev
-        done
-    fi
-
-    # Delete all configured 6to4 address
-    ipv6_cleanup_6to4_tunnels tun6to4
-
-    # Control running radvd
-    ipv6_trigger_radvd down "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE
-fi
-
-# Delete all current configured IPv6 addresses on this interface
-ipv6_cleanup_device $DEVICE

sysconfig/network-scripts/ifdown-isdn

@@ -1 +0,0 @@
-ifdown-ippp

sysconfig/network-scripts/ifdown-post

@@ -1,69 +0,0 @@
-#!/bin/sh
-# This should be called whenever an interface goes down, not just when
-# it is brought down explicitly.
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-unset REALDEVICE
-if [ "$1" = --realdevice ] ; then
-    REALDEVICE=$2
-    shift 2
-fi
-
-CONFIG=$1
-source_config
-
-[ -z "$REALDEVICE" ] && REALDEVICE=$DEVICE
-
-/etc/sysconfig/network-scripts/ifdown-routes ${REALDEVICE} ${DEVNAME}
-
-# Remove duplicate DNS entries and shift them,
-# to have always correct condition below...
-update_DNS_entries
-
-if ! is_false "${PEERDNS}" || is_true "${RESOLV_MODS}" && \
-    [ "${DEVICETYPE}" = "ppp" -o "${DEVICETYPE}" = "ippp" -o -n "${DNS1}" \
-    -o "${BOOTPROTO}" = "bootp" -o "${BOOTPROTO}" = "dhcp" ] ; then
-    if [ -f /etc/resolv.conf.save ]; then
-        change_resolv_conf /etc/resolv.conf.save
-        rm -f /etc/resolv.conf.save
-    fi
-    if [ "${DEVICETYPE}" = "ppp" -o "${DEVICETYPE}" = "ippp" ]; then
-        if [ -f /etc/ppp/peers/$DEVICE ] ; then
-            rm -f /etc/ppp/peers/$DEVICE
-        fi
-    fi
-fi
-
-# Reset the default route if this interface had a special one
-if ! check_default_route ; then
-    # ISDN device needs special handling dial on demand
-    if [ "${DEVICETYPE}" = "ippp" -o "${DEVICETYPE}" = "isdn" ] && \
-       [ "$DIALMODE" = "auto" ] ; then
-        if [ -z "$GATEWAY" ] ; then
-            /sbin/ip route add default ${METRIC:+metric} \
-                ${WINDOW:+window $WINDOW} dev ${DEVICE}
-        else
-            /sbin/ip route add default ${METRIC:+metric} \
-                ${WINDOW:+window $WINDOW} via ${GATEWAY}
-        fi
-    else
-        add_default_route ${DEVICE}
-    fi
-fi
-
-# Reset firewall zone (empty ZONE means default):
-if [ "${REALDEVICE}" != "lo" ]; then
-    dbus-send --print-reply --system --dest=org.fedoraproject.FirewallD1 \
-              /org/fedoraproject/FirewallD1 \
-              org.fedoraproject.FirewallD1.zone.removeInterface \
-              string:"" string:"${DEVICE}" \
-              > /dev/null 2>&1
-fi
-
-if [ -x /sbin/ifdown-local ]; then
-    /sbin/ifdown-local ${DEVICE}
-fi
-
-exit 0

sysconfig/network-scripts/ifdown-routes

@@ -1,33 +0,0 @@
-#! /bin/bash
-#
-# Drops static routes which go through device $1
-
-if [ -z "$1" ]; then
-    echo $"usage: ifdown-routes <net-device> [<nickname>]"
-    exit 1
-fi
-
-# The routes are actually dropped just by setting the link down, so nothing
-# needs to be done
-
-MATCH='^[[:space:]]*(\#.*)?$'
-
-# Routing rules
-FILES="/etc/sysconfig/network-scripts/rule-$1 /etc/sysconfig/network-scripts/rule6-$1"
-if [ -n "$2" -a "$2" != "$1" ]; then
-    FILES="$FILES /etc/sysconfig/network-scripts/rule-$2 /etc/sysconfig/network-scripts/rule6-$2"
-fi
-
-for file in $FILES; do
-    if [ -f "$file" ]; then
-        proto=
-        if [ "$file" != "${file##*/rule6-}" ]; then
-            proto="-6"
-        fi
-        { cat "$file" ; echo ; } | while read line; do
-            if [[ ! "$line" =~ $MATCH ]]; then
-                /sbin/ip $proto rule del $line
-            fi
-        done
-    fi
-done

sysconfig/network-scripts/ifdown-sit

@@ -1,58 +0,0 @@
-#!/bin/bash
-#
-# ifdown-sit
-#
-#
-# Taken from:
-# (P) & (C) 2000-2003 by Peter Bieringer <pb@bieringer.de>
-#
-#  You will find more information on the initscripts-ipv6 homepage at
-#   http://www.deepspace6.net/projects/initscripts-ipv6.html
-#
-# RHL integration assistance by Pekka Savola <pekkas@netcore.fi>
-#
-# Version 2002-11-01
-#
-# Uses following information from /etc/sysconfig/network-scripts/ifcfg-$1:
-#  DEVICE=<device>
-#
-
-
-. /etc/sysconfig/network
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-CONFIG=$1
-[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
-source_config
-
-# IPv6 don't need aliases anymore, config is skipped
-REALDEVICE=${DEVICE%%:*}
-[ "$DEVICE" != "$REALDEVICE" ] && exit 0
-
-[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1
-. /etc/sysconfig/network-scripts/network-functions-ipv6
-
-
-# Generic tunnel device sit0 is not supported here
-if [ "$DEVICE" = "sit0" ]; then
-    net_log $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking"
-    exit 1
-fi
-
-# IPv6 test, no module loaded, exit if system is not IPv6-ready
-ipv6_test testonly || exit 0
-
-# Test device status
-ipv6_test_device_status $DEVICE
-if [ $? != 0 -a $? != 11 ]; then
-    # device doesn't exist or other problem occurs
-    exit 0
-fi
-
-# Cleanup additional static routes
-/etc/sysconfig/network-scripts/ifdown-routes ${REALDEVICE}
-
-# Cleanup and shut down IPv6-in-IPv4 tunnel device
-ipv6_del_tunnel_device $DEVICE

sysconfig/network-scripts/ifdown-tunnel

@@ -1,45 +0,0 @@
-#!/bin/bash
-# Copyright (C) 1996-2006 Red Hat, Inc. all rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License, version 2,
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# Thanks to:
-#  - Razvan Corneliu C.R. Vilt <razvan.vilt@linux360.ro>
-#  - Aaron Hope <aaron.hope@unh.edu>
-#  - Sean Millichamp <sean@enertronllc.com>
-# for providing the scripts this one is based on
-
-. /etc/init.d/functions
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-[ -f ../network ] && . ../network
-
-CONFIG=$1
-need_config "$CONFIG"
-source_config
-
-# Generic tunnel devices are not supported here
-if [ "$DEVICE" = gre0 -o "$DEVICE" = tunl0 -o "$DEVICE" = ip6tnl0 ]; then
-    net_log $"Device '$DEVICE' isn't supported as a valid GRE device name."
-    exit 1
-fi
-
-check_device_down "$DEVICE" && exit 0
-
-/sbin/ip link set dev "$DEVICE" down
-/sbin/ip tunnel del "$DEVICE"
-
-exec /etc/sysconfig/network-scripts/ifdown-post "$CONFIG"

sysconfig/network-scripts/ifup

@@ -1,170 +0,0 @@
-#!/bin/bash
-# Network Interface Configuration System
-# Copyright (c) 1996-2009 Red Hat, Inc. all rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License, version 2,
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-unset WINDOW # defined by screen, conflicts with our usage
-
-. /etc/init.d/functions
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-[ -f ../network ] && . ../network
-
-CONFIG=${1}
-
-[ -z "${CONFIG}" ] && {
-    echo $"Usage: ifup <configuration>" >&2
-    exit 1
-}
-
-if ! [ -f /etc/sysconfig/disable-deprecation-warnings ] && ! is_true ${DEPRECATION_WARNING_ISSUED}; then
-    net_log $"You are using 'ifup' script provided by 'network-scripts', which are now deprecated." warning ifup >&2
-    net_log $"'network-scripts' will be removed in one of the next major releases of RHEL." warning ifup >&2
-    net_log $"It is advised to switch to 'NetworkManager' instead - it provides 'ifup/ifdown' scripts as well." warning ifup >&2
-fi
-
-need_config "${CONFIG}"
-
-[ -f "${CONFIG}" ] || {
-    echo $"$0: configuration for ${1} not found." >&2
-    echo $"Usage: ifup <configuration>" >&2
-    exit 1
-}
-
-if [ ${UID} != 0 ]; then
-    if [ -x /usr/sbin/usernetctl ]; then
-        source_config
-        if /usr/sbin/usernetctl ${CONFIG} report ; then
-            exec /usr/sbin/usernetctl ${CONFIG} up
-        fi
-    fi
-    echo $"Users cannot control this device." >&2
-    exit 1
-fi
-
-source_config
-
-if [ "foo$2" = "fooboot" ] && [ "${ONBOOT}" = "no" -o "${ONBOOT}" = "NO" ]
-then
-    exit 0
-fi
-if [ -n "$IN_HOTPLUG" ] && [ "${HOTPLUG}" = "no" -o "${HOTPLUG}" = "NO" ]
-then
-    exit 0
-fi
-if [ -n "$IN_HOTPLUG" -a "${TYPE}" = "Bridge" ]; 
-then
-    exit 0
-fi
-
-if [ "$_use_nm" = "true" -a -n "$UUID" -a "$REALDEVICE" != "lo" ]; then
-    if [ "foo$2" = "fooboot" ] && [ "${TYPE}" = "Wireless" ]; then
-        exit 0
-    fi
-    [ -n "${DEVICE}" ] && is_nm_handling ${DEVICE} && exit 0
-    nmcli con up uuid "$UUID"
-    exit $?
-fi
-
-# Ethernet 802.1Q VLAN support
-if [ "${VLAN}" = "yes" ] && [ "$ISALIAS" = "no" ] && [ -n "$DEVICE" ]; then
-    if [ -n "${VID}" ]; then
-        if test -z "$PHYSDEV"; then
-            net_log $"PHYSDEV should be set for device ${DEVICE}"
-            exit 1
-        fi
-    else
-        VID=""
-        MATCH='^.+\.[0-9]{1,4}$'
-        if [[ "${DEVICE}" =~ $MATCH ]]; then
-            VID=$(echo "${DEVICE}" | LC_ALL=C sed 's/^.*\.\([0-9]\+\)/\1/')
-            PHYSDEV=${DEVICE%.*}
-        fi
-        MATCH='^vlan[0-9]{1,4}?'
-        if [[ "${DEVICE}" =~ $MATCH ]]; then
-            VID=$(echo "${DEVICE}" | LC_ALL=C sed 's/^vlan0*//')
-            # PHYSDEV should be set in ifcfg-vlan* file
-            if test -z "$PHYSDEV"; then
-                net_log $"PHYSDEV should be set for device ${DEVICE}"
-                exit 1
-            fi
-        fi
-    fi
-    if [ -n "$VID" ]; then
-        if [ ! -d /proc/net/vlan ]; then
-            if ! modprobe 8021q >/dev/null 2>&1 ; then
-                net_log $"No 802.1Q VLAN support available in kernel for device ${DEVICE}"
-                exit 1
-            fi
-        fi
-
-        is_available_wait ${PHYSDEV} ${DEVTIMEOUT} || {
-            if [ "$?" = "1" ] ; then
-                net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization."
-                exit 1
-            else
-                exit 0
-            fi
-        }
-
-        # Link on Physical device needs to be up but no ip required
-        check_device_down ${PHYSDEV} && set_link_up ${PHYSDEV}
-
-        if [ ! -f /proc/net/vlan/${DEVICE} ]; then
-            if [ "${REORDER_HDR}" = "no" -o "${REORDER_HDR}" = "0" ]; then
-                FLAG_REORDER_HDR="reorder_hdr off"
-            fi
-
-            if [ "${GVRP}" = "yes" -o "${GVRP}" = "1" ]; then
-                FLAG_GVRP="gvrp on"
-            fi
-
-            ip link add dev ${DEVICE} link ${PHYSDEV} type vlan id ${VID} ${FLAG_REORDER_HDR} ${FLAG_GVRP} || {
-                (/usr/bin/logger -p daemon.info -t ifup \
-                     $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}" &) &
-                net_log $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}"
-                exit 1
-            }
-
-            [ -n "${VLAN_EGRESS_PRIORITY_MAP}" ] && ip link set dev ${DEVICE} type vlan egress ${VLAN_EGRESS_PRIORITY_MAP}
-        fi
-    fi
-
-    /usr/lib/systemd/systemd-sysctl \
-        --prefix "/proc/sys/net/ipv4/conf/${DEVICE}" \
-        --prefix "/proc/sys/net/ipv6/conf/${DEVICE}"
-fi
-
-if [ "${BOOTPROTO}" = "bootp" -o "${BOOTPROTO}" = "dhcp" ]; then
-    DYNCONFIG=true
-fi
-
-if [ -x /sbin/ifup-pre-local ]; then
-    /sbin/ifup-pre-local ${CONFIG} $2
-fi
-
-OTHERSCRIPT="/etc/sysconfig/network-scripts/ifup-${DEVICETYPE}"
-
-if [ ! -x ${OTHERSCRIPT} ]; then
-    OTHERSCRIPT="/etc/sysconfig/network-scripts/ifup-${TYPE}"
-fi
-
-if [ ! -x ${OTHERSCRIPT} ]; then
-    OTHERSCRIPT="/etc/sysconfig/network-scripts/ifup-eth"
-fi
-
-exec ${OTHERSCRIPT} ${CONFIG} $2

sysconfig/network-scripts/ifup-aliases

@@ -1,371 +0,0 @@
-#!/bin/bash
-
-#
-# configures aliases of device $1
-#
-# This script goes out of its way to arrive at the configuration of ip
-# aliases described in the ifcfg-$DEV:* and ifcfg-$DEV-range* files from
-# whatever existing configuration it may be given: existing aliases not
-# specified in the configuration will be removed, netmasks and broadcast
-# addrs will be updated on existing aliases, and new aliases will be setup.
-#
-#   range specification files:
-#
-# One can specify ranges of alised ipaddress using ifcfg-$DEV-range* files.
-# Specify multiple ranges using multiple files, such as ifcfg-eth0-range0 and
-# ifcfg-eth0-range1, etc. In these files, the following configuration variables 
-# specify the range:
-#
-#    IPADDR_START    -- ipaddr to start range at. eg "192.168.30.1"
-#    IPADDR_END      -- ipaddr to end range at. eg "192.168.30.254"
-#    CLONENUM_START  -- interface clone number to start using for this range. eg "0"
-#
-# The above example values create the interfaces eth0:0 through eth0:253 using
-# ipaddrs 192.168.30.1 through 192.168.30.254, inclusive.
-#
-# Other configuration variables such as NETMASK and BROADCAST may be specified
-# in the range file and will apply to all of the ipaddresses in the range. Range
-# files also inherit configuration from the ifcfg-$DEV file just like normal.
-#
-# Note that IPADDR_START and IPADR_END are required to be in the same class-c
-# block. I.e. IPADDR_START=192.168.30.1 and IPADDR_END=192.168.31.255 is
-# not valid.
-#
-#   speed with large sets of interfaces:
-#
-# Considerable effort was spent making this script fast. It can efficiently 
-# handle a thousand ip aliases on one interface.
-# 
-# With large sets of ipaddresses the NO_ALIASROUTING=yes configuration is
-# highly recommended. (This can be specified in ifcfg-$DEV and inherited.) This
-# prevents this script from setting up routing details for the virtual
-# interfaces, which I don't think is needed, because outgoing traffic can use the
-# main interface. However, make your own conclusions on what you need.
-# 
-# My test setup of four class C address blocks on a P166 took 25 seconds of 
-# which 16 seconds of this was spent in the ifcconfig calls. Without the 
-# NO_ALIASROUTING=yes config an additional 12 seconds is spent in route calls.
-#
-#   notes on internals:
-#
-# This script uses the bash "eval" command to lookup shell variables with names
-# which are generated from other shell variables. This allows us to, in effect,
-# create hashes using the shell variable namesspace by just including the hash
-# key in the name of the variable.
-#
-# This script originally written by: David Harris <dharris@drh.net> 
-#                                    Principal Engineer, DRH Internet
-#                                    June 30, 1999
-#
-#            modified by: Bill Nottingham <notting@redhat.com>
-
-TEXTDOMAIN=initscripts
-TEXTDOMAINDIR=/etc/locale
-
-device=$1
-if [ "$device" = "" ]; then
-  echo $"usage: ifup-aliases <net-device> [<parent-config>]\n"
-  exit 1
-fi
-
-PARENTCONFIG=${2:-ifcfg-$device}
-parent_device=$device
-
-cd /etc/sysconfig/network-scripts  
-. ./network-functions
-
-# Grab the current configuration of any running aliases, place device info
-# into variables of the form:
-# rdev_<index>_addr = <ip address>
-# rdev_<index>_pb = <prefix>_<broadcast>
-# rdevip_<ipaddress> = <index>
-# Example:
-# rdev_0_addr=192.168.1.1
-# rdev_0_pb=24_192.16.1.255
-# rdevip_192_168_1_1=0
-#
-# A list of all the devices is created in rdev_LIST.
-
-eval $( ip addr show $device label $device:* | \
-    awk 'BEGIN { COUNT=0;LAST_DEV="" } /inet / {
-        # Split IP address into address/prefix
-        split($2,IPADDR,"/");
-        # Create A_B_C_D IP address form
-        IP_ADDR=IPADDR[1];
-        gsub(/\./,"_",IP_ADDR);
-        # Split device into device:index
-        split($NF,DEV,":");
-        # Update last device
-        LAST_DEV=LAST_DEV " " DEV[2];
-        printf("rdev_%s_addr=%s\nrdevip_%s=%s\nrdev_%s_pb=%s_%s\nrdev_LIST=\"%s\"\n",
-        DEV[2],IPADDR[1],IP_ADDR,DEV[2],DEV[2],IPADDR[2],$4,LAST_DEV);
-    } END {
-        if(LAST_DEV == "") print "no_devices_are_up=yes"
-    }' );
-
-#
-# Store configuration of the parent device and network
-#
-
-# read from the /etc/sysconfig/network
-eval ` (
-    . /etc/sysconfig/network;
-    echo network_GATEWAY=$GATEWAY\;;
-    echo network_GATEWAYDEV=$GATEWAYDEV\;;
-) `
-
-# read defaults from the parent config file
-[ -f $PARENTCONFIG ] || {
-    net_log $"Missing config file $PARENTCONFIG."
-    exit 1
-}
-eval ` (
-    . ./$PARENTCONFIG;
-    echo default_PREFIX=$PREFIX\;;
-    echo default_NETMASK=$NETMASK\;;
-    echo default_BROADCAST=$BROADCAST\;;
-    echo default_GATEWAY=$GATEWAY\;;
-    echo default_NO_ALIASROUTING=$NO_ALIASROUTING\;;
-    echo default_ARPCHECK=$ARPCHECK\;;
-    echo default_ARPUPDATE=$ARPUPDATE\;;
-) `
-[ -z "$default_GATEWAY" ] && default_GATEWAY=$network_GATEWAY
-
-function ini_env ()
-{
-    DEVICE=""
-    IPADDR=""
-    IPV6ADDR=""
-    PREFIX=$default_PREFIX
-    NETMASK=$default_NETMASK
-    BROADCAST=$default_BROADCAST
-    GATEWAY=$default_GATEWAY
-    NO_ALIASROUTING=$default_NO_ALIASROUTING
-    ONPARENT=""
-    ARPCHECK=$default_ARPCHECK
-    ARPUPDATE=$default_ARPUPDATE
-}
-
-function is_default_gateway ()
-{
-    LC_ALL=C /sbin/ip route ls default scope global \
-        | awk '$3 == "'"$1"'" { found = 1; } END { exit found == 0; }'
-}
-
-#
-# Read the alias configuration files and enable each aliased
-# device using new_interface()
-#
-
-function new_interface ()
-{
-
-    ipa=$IPADDR; ipb=${ipa#*.}; ipc=${ipb#*.};
-    IPGLOP="${ipa%%.*}_${ipb%%.*}_${ipc%%.*}_${ipc#*.}";
-    DEVNUM=${DEVICE#*:}
-
-    MATCH='^[0-9A-Za-z_]*$'
-    if (LC_ALL=C; [[ ! "$DEVNUM" =~ $MATCH ]]); then
-        net_log $"error in $FILE: invalid alias number"
-        return 1
-    fi
-
-    eval "
-        ipseen=\$ipseen_${IPGLOP}; devseen=\$devseen_${DEVNUM};
-        ipseen_${IPGLOP}=$FILE; devseen_${DEVNUM}=$FILE;
-    ";
-
-    if [ -n "$ipseen" ]; then
-        net_log $"error in $FILE: already seen ipaddr $IPADDR in $ipseen"
-        return 1
-    fi
-
-    if [ -n "$devseen" ]; then
-        net_log $"error in $FILE: already seen device $parent_device:$DEVNUM in $devseen"
-        return 1
-    fi
-
-    if [ -z "$DEVICE" -o -z "$IPADDR" ]; then
-        if [ -n "$IPV6ADDR" -a -n "$DEVICE" ] && ! is_false "$IPV6INIT"; then
-            /etc/sysconfig/network-scripts/ifup-ipv6 ${DEVICE}
-            return $?
-        fi
-        net_log $"error in $FILE: didn't specify device or ipaddr"
-        return 1
-    fi
-
-    if [ -z "$NETMASK" -a -z "$PREFIX" ]; then
-        net_log $"error iN $FILE: didn't specify netmask or prefix"
-    fi
-
-    if [ -z "$PREFIX" ]; then
-        eval $(/bin/ipcalc --prefix ${IPADDR} ${NETMASK})
-    fi
-
-    if [ -z "$BROADCAST" -o "$BROADCAST" = "$default_BROADCAST" ]; then
-        eval $(/bin/ipcalc --broadcast ${IPADDR}/${PREFIX})
-    fi
-
-    if [ "$no_devices_are_up" = "yes" ]; then
-        setup_this=yes
-    else
-
-        setup_this=""
-
-        eval "
-        rdev_addr=\$rdev_${DEVNUM}_addr;
-        rdev_pb=\$rdev_${DEVNUM}_pb;
-        rdev_mark=\$rdev_${DEVNUM}_mark;
-        rdevip=\$rdevip_${IPGLOP};
-        ";
-
-        if [ -n "$rdev_addr" ]; then
-            if [ "$rdev_addr" = "${IPADDR}" ]; then
-                newmark=keep
-                if [ "$rdev_pb" != "${PREFIX}_${BROADCAST}" ]; then
-                    setup_this=freshen
-                else
-                    setup_this=no
-                fi
-            else
-                if [ "$rdev_mark" != "remove" ]; then
-                    /sbin/ip addr flush dev $parent_device label $parent_device:${DEVNUM}
-                fi
-                newmark=remove
-                setup_this=yes
-            fi
-            if [ -n "$rdev_mark" -a "$rdev_mark" != "$newmark" ]; then
-                net_log $"error in ifcfg-${parent_device}: files"
-                return 1
-            fi
-            eval " rdev_${DEVNUM}_mark=\$newmark ";
-        else
-            setup_this=yes
-        fi
-
-        if [ -n "$rdevip" -a "$rdevip" != "${DEVNUM}" ]; then
-            eval " mark_remove=\$rdev_${rdevip}_mark ";
-            if [ -n "$mark_remove" -a "$mark_remove" != "remove" ]; then
-                net_log $"error in ifcfg-${parent_device}: files"
-                return 1
-            fi
-            if [ "$mark_remove" != "remove" ]; then
-                eval " rdev_${rdevip}_mark=remove ";
-                /sbin/ip addr flush dev $parent_device label $parent_device:$rdevip
-            fi
-        fi
-
-    fi
-
-    if [ "$setup_this" = "freshen" ] ; then
-        # we can do the freshen stuff right now
-        /sbin/ip addr change ${IPADDR}/${PREFIX} brd ${BROADCAST}
-    fi
-
-    if [ "$setup_this" = "yes" ] ; then
-        if [ "${parent_device}" != "lo" ] &&  [ "${ARPCHECK}" != "no" ] && \
-                is_available ${parent_device} && \
-                ( grep -qswi "up" /sys/class/net/${parent_device}/operstate ||  grep -qswi "1" /sys/class/net/${parent_device}/carrier ) ; then
-            echo $"Determining if ip address ${IPADDR} is already in use for device ${parent_device}..."
-            ARPING=$(/sbin/arping -c 2 -w ${ARPING_WAIT:-3} -D -I ${parent_device} ${IPADDR})
-            if [ $? = 1 ]; then
-                ARPINGMAC=$(echo $ARPING | sed -ne 's/.*\[\(.*\)\].*/\1/p')
-                net_log $"Error, some other host ($ARPINGMAC) already uses address ${IPADDR}."
-                return 1
-            fi
-        fi
-
-        /sbin/ip addr add ${IPADDR}/${PREFIX} brd ${BROADCAST} \
-            dev ${parent_device} label ${DEVICE}
-
-        # update ARP cache of neighboring computers:
-        if ! is_false "${ARPUPDATE}" && [ "${REALDEVICE}" != "lo" ]; then
-            /sbin/arping -q -A -c 1 -w ${ARPING_UPDATE_WAIT:-3} -I ${parent_device} ${IPADDR}
-            ( sleep 2;
-            /sbin/arping -q -U -c 1 -w ${ARPING_UPDATE_WAIT:-3} -I ${parent_device} ${IPADDR} ) > /dev/null 2>&1 < /dev/null &
-        fi
-
-        ! is_false "$IPV6INIT" && \
-            /etc/sysconfig/network-scripts/ifup-ipv6 ${DEVICE}
-
-        if [ "$NO_ALIASROUTING" != yes ]; then
-
-            GATEWAYDEV=$network_GATEWAYDEV;
-
-            if [ -n "${GATEWAY}" -a \
-                    \( -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${DEVICE}" \) ]; then
-                # set up default gateway, if it isn't already there
-                if ! is_default_gateway "$GATEWAY"; then
-                    ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY} dev ${DEVICE}
-                fi
-            fi
-
-            /etc/sysconfig/network-scripts/ifup-routes ${DEVICE} ${NAME}
-
-            ifuplocal_queue="$ifuplocal_queue $DEVICE"
-        fi
-    fi
-}
-
-if [ "$BASH_VERSINFO" ]; then
-    shopt -s nullglob
-else
-    allow_null_glob_expansion=foo
-fi
-
-for FILE in ifcfg-${parent_device}:* ; do
-    is_ignored_file "$FILE" && continue
-    ini_env
-    . ./$FILE
-    [ -z "$DEVICE" ] && DEVICE=${FILE##ifcfg-}
-    [ "$ONPARENT" != "no" -a "$ONPARENT" != "NO" ] && new_interface
-    unset DEVICE
-done
-
-for FILE in ifcfg-${parent_device}-range* ; do
-    is_ignored_file "$FILE" && continue
-    ini_env
-    . ./$FILE
-
-    ipaddr_prefix=${IPADDR_START%.*}
-    ipaddr_startnum=${IPADDR_START##*.}
-    ipaddr_endnum=${IPADDR_END##*.}
-
-    if [ "${IPADDR_START%.*}" != "${IPADDR_END%.*}" ]; then
-        net_log $"error in $FILE: IPADDR_START and IPADDR_END don't agree"
-        continue
-    fi
-
-    if [ $ipaddr_startnum -gt $ipaddr_endnum ]; then
-        net_log $"error in $FILE: IPADDR_START greater than IPADDR_END"
-        continue
-    fi
-
-    ipaddr_num=$ipaddr_startnum
-    ipaddr_clonenum=$CLONENUM_START
-
-    while [ $ipaddr_num -le $ipaddr_endnum ]; do
-        IPADDR="$ipaddr_prefix.$ipaddr_num"
-        DEVICE="$parent_device:$ipaddr_clonenum"
-        IPV6INIT="no"
-        [ "$ONPARENT" != "no" -a "$ONPARENT" != "NO" ] && new_interface
-        ipaddr_num=$(($ipaddr_num+1))
-        ipaddr_clonenum=$(($ipaddr_clonenum+1))
-    done
-done
-
-#
-# Remove any devices that should not be around
-#
-for DEVNUM in $rdev_LIST ; do
-    eval " rdev_mark=\$rdev_${DEVNUM}_mark "
-    if [ -z "$rdev_mark" ]; then
-        /sbin/ip addr flush dev $parent_device label $parent_device:${DEVNUM}
-    fi
-done
-
-if [ -x /sbin/ifup-local ]; then
-    for DEVICE in $ifuplocal_queue ; do
-        /sbin/ifup-local ${DEVICE}
-    done
-fi

sysconfig/network-scripts/ifup-bnep

@@ -1,55 +0,0 @@
-#! /bin/bash
-
-. /etc/init.d/functions
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-[ -f ../network ] && . ../network
-
-CONFIG=${1}
-
-source_config
-
-# On hotplug events, just bring the virtual device up as if it's normal Ethernet
-if [ -n "$IN_HOTPLUG" ]; then
-    exec sh -x /etc/sysconfig/network-scripts/ifup-eth ${CONFIG} $2 
-fi
-
-start_panu()
-{
-    PANDARGS="--persist --pidfile=/run/pand-${DEVICE}.pid --ethernet=${DEVICE} --autozap"
-    [ "${CACHE}" != "no" -a "${CACHE}" != "NO" ] && PANDARGS="${PANDARGS} --cache"
-    if [ "${REMOTEBDADDR}" = "" ]; then
-        PANDARGS="${PANDARGS} --search"
-    else
-        PANDARGS="${PANDARGS} --connect ${REMOTEBDADDR}"
-    fi
-    /usr/bin/pand ${PANDARGS}
-}
-
-start_nap()
-{
-    :
-}
-
-start_gn()
-{
-    :
-}
-
-case "$ROLE" in
-PANU)
-    start_panu
-    ;;
-NAP)
-    start_nap
-    ;;
-GN)
-    start_gn
-    ;;
-*)
-    echo Unknown BNEP mode :$ROLE
-    ;;
-esac
-

sysconfig/network-scripts/ifup-eth

@@ -1,383 +0,0 @@
-#!/bin/bash
-# Network Interface Configuration System
-# Copyright (c) 1996-2014 Red Hat, Inc. all rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License, version 2,
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-. /etc/init.d/functions
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-[ -f ../network ] && . ../network
-
-CONFIG=${1}
-
-need_config "${CONFIG}"
-
-source_config
-
-if [ "${BOOTPROTO}" = "bootp" -o "${BOOTPROTO}" = "dhcp" ]; then
-    DYNCONFIG=true
-fi
-
-# load the module associated with that device
-# /sbin/modprobe ${REALDEVICE}
-is_available ${REALDEVICE}
-
-# bail out, if the MAC does not fit
-if [ -n "${HWADDR}" ]; then
-    FOUNDMACADDR=$(get_hwaddr ${REALDEVICE})
-    if [ "${FOUNDMACADDR}" != "${HWADDR}" -a "${FOUNDMACADDR}" != "${MACADDR}" ]; then
-        net_log $"Device ${DEVICE} has different MAC address than expected, ignoring."
-        exit 1
-    fi
-fi
-
-# If the device is a bridge, create it
-if [ "${TYPE}" = "Bridge" ]; then
-    bridge_opts=""
-    [ -n "${DELAY}" ] && bridge_opts+="forward_delay ${DELAY} "
-    if is_true "${STP}"; then
-	    bridge_opts+="stp_state 1 "
-    elif is_false "${STP}"; then
-	    bridge_opts+="stp_state 0 "
-    fi
-    [ -n "${PRIO}" ] && bridge_opts+="priority ${PRIO} "
-    [ -n "${AGEING}" ] && bridge_opts+="ageing_time ${AGEING} "
-
-    if [ ! -d /sys/class/net/${DEVICE}/bridge ]; then
-        ip link add ${DEVICE} type bridge $bridge_opts || exit 1
-    elif [ -n "${bridge_opts}" ]; then
-        ip link set dev ${DEVICE} type bridge $bridge_opts || exit 1
-    fi
-    unset bridge_opts
-
-    # add the bits to setup driver parameters here
-    for arg in $BRIDGING_OPTS ; do
-        key=${arg%%=*};
-        value=${arg##*=};
-        if [ "${key}" != "multicast_router" -a "${key}" != "hash_max" -a "${key}" != "multicast_snooping" ]; then
-            echo $value > /sys/class/net/${DEVICE}/bridge/$key
-        fi
-    done
-
-    # set LINKDELAY (used as timeout when calling check_link_down())
-    # to at least (${DELAY} * 2) + 7 if STP is enabled. This is the
-    # minimum time required for /sys/class/net/$REALDEVICE/carrier to
-    # become 1 after "set_link_up $DEVICE" is called.
-    if is_true "${STP}"; then
-        if [ -n "${DELAY}" ]; then
-          forward_delay="${DELAY}"
-        else
-          # If the ${DELAY} value is not set by the user, then we need to obtain
-          # the forward_delay value from kernel first, and convert it to seconds.
-          # Otherwise STP might not correctly complete the startup before trying
-          # to obtain an IP address from DHCP.
-          forward_delay="$(cat /sys/devices/virtual/net/${DEVICE}/bridge/forward_delay)"
-          forward_delay="$(convert2sec ${forward_delay} centi)"
-        fi
-
-        forward_delay=$(bc -q <<< "${forward_delay} * 2 + 7")
-
-        # It's possible we are comparing floating point numbers here, therefore
-        # we are using 'bc' for comparison. The [ ] and [[ ]] do not work.
-        (( $(bc -l <<< "${LINKDELAY:-0} < ${forward_delay}") )) && LINKDELAY=${forward_delay}
-
-        unset forward_delay
-    fi
-fi
-
-# Create tap device.
-if [ "${TYPE}" = "Tap" ]; then
-    [ -n "${OWNER}" ] && OWNER="user ${OWNER}"
-    TUNMODE="mode tap"
-    [[ ${DEVICE} == tun* ]] && TUNMODE="mode tun"
-    ip tuntap add ${TUNMODE} ${OWNER} dev ${DEVICE} > /dev/null
-fi
-
-# Team master initialization.
-if [ -n "${TEAM_CONFIG}" ] && [ ! "${DEVICETYPE}" = "Team" ] && [ -x ./ifup-Team ]; then
-    ./ifup-Team ${CONFIG} $2
-fi
-
-if [ -z "${REALDEVICE}" ]; then
-  net_log $"Device name does not seem to be present."
-  exit 1
-fi
-
-# now check the real state
-is_available_wait ${REALDEVICE} ${DEVTIMEOUT} || {
-    if [ -n "$alias" ]; then
-        net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization."
-    else
-        net_log $"Device ${DEVICE} does not seem to be present, delaying initialization."
-    fi
-    exit 1
-}
-
-
-# this isn't the same as the MAC in the configuration filename.  It is
-# available as a configuration option in the config file, forcing the kernel
-# to think an ethernet card has a different MAC address than it really has.
-if [ -n "${MACADDR}" ]; then
-    ip link set dev ${DEVICE} address ${MACADDR}
-fi
-if [ -n "${MTU}" ]; then
-    ip link set dev ${DEVICE} mtu ${MTU}
-fi
-
-# is the device wireless? If so, configure wireless device specifics
-is_wireless_device ${DEVICE} && . ./ifup-wireless
-
-# Team slave device?
-if [ -n "${TEAM_MASTER}" ] && [ ! "${DEVICETYPE}" = "TeamPort" ] && [ -x ./ifup-TeamPort ]; then
-    ./ifup-TeamPort ${CONFIG} $2
-    ethtool_set
-    exit 0
-fi
-
-# slave device?
-if [ "${SLAVE}" = yes -a "${ISALIAS}" = no -a "${MASTER}" != "" ]; then
-    install_bonding_driver ${MASTER}
-    grep -wq "${DEVICE}" /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null || {
-        /sbin/ip link set dev ${DEVICE} down
-        echo "+${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null
-    }
-    ethtool_set
-
-    exit 0
-fi
-
-# Bonding initialization. For DHCP, we need to enslave the devices early,
-# so it can actually get an IP.
-if [ "$ISALIAS" = no ] && is_bonding_device ${DEVICE} ; then
-    install_bonding_driver ${DEVICE}
-    set_link_up ${DEVICE}
-    for device in $(LANG=C grep -l "^[[:space:]]*MASTER=['\"]\?${DEVICE}['\"]\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-*) ; do
-        is_ignored_file "$device" && continue
-        /sbin/ifup ${device##*/} || net_log "Unable to start slave device ${device##*/} for master ${DEVICE}." warning
-    done
-
-    [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}
-
-    # add the bits to setup the needed post enslavement parameters
-    for arg in $BONDING_OPTS ; do   
-        key=${arg%%=*};
-        value=${arg##*=};
-        if [ "${key}" = "primary" ]; then 
-            echo $value > /sys/class/net/${DEVICE}/bonding/$key
-        fi
-    done
-fi
-
-# If the device is part of a bridge, add the device to the bridge
-if [ -n "${BRIDGE}" ]; then
-    if [ ! -d /sys/class/net/${BRIDGE}/bridge ]; then
-        ip link add ${BRIDGE} type bridge 2>/dev/null
-    fi
-    /sbin/ip addr flush dev ${DEVICE} 2>/dev/null
-    set_link_up ${DEVICE}
-    ethtool_set
-    [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}
-    ip link set dev ${DEVICE} master ${BRIDGE}
-    # add the bits to setup driver parameters here
-    for arg in $BRIDGING_OPTS ; do
-        key=${arg%%=*};
-        value=${arg##*=};
-        echo $value > /sys/class/net/${DEVICE}/brport/$key
-    done
-    # Upon adding a device to a bridge,
-    # it's necessary to make radvd reload its config
-    [ -r /run/radvd/radvd.pid ] && kill -HUP $(cat /run/radvd/radvd.pid)
-    exit 0
-fi
-
-if [ -n "${DYNCONFIG}" ] && [ -x /sbin/dhclient ]; then
-    if is_true "${PERSISTENT_DHCLIENT}"; then
-        ONESHOT="";
-    else
-        ONESHOT="-1";
-    fi;
-    generate_config_file_name
-    generate_lease_file_name
-
-    # Initialize the dhclient args and obtain the hostname options if needed:
-    DHCLIENTARGS="${DHCLIENTARGS} ${ONESHOT} -q ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /run/dhclient-${DEVICE}.pid"
-    set_hostname_options DHCLIENTARGS
-
-    echo
-    echo -n $"Determining IP information for ${DEVICE}..."
-    if ! is_true "${PERSISTENT_DHCLIENT}" && check_link_down ${DEVICE}; then
-        echo $" failed; no link present.  Check cable?"
-        exit 1
-    fi
-
-    ethtool_set
-
-    if /sbin/dhclient ${DHCLIENTARGS} ${DEVICE} ; then
-        echo $" done."
-        dhcpipv4="good"
-    else
-        echo $" failed."
-        if is_true "${IPV4_FAILURE_FATAL}"; then
-            exit 1
-        fi
-        if is_false "$IPV6INIT" || ! is_true "$DHCPV6C"; then
-            exit 1
-        fi
-        net_log "Unable to obtain IPv4 DHCP address ${DEVICE}." warning
-    fi
-    # end dynamic device configuration
-else 
-    if [ -z "${IPADDR}" -a -z "${IPADDR0}" -a -z "${IPADDR1}" -a -z "${IPADDR2}" ]; then
-        # enable device without IP, useful for e.g. PPPoE
-        set_link_up ${REALDEVICE}
-        ethtool_set
-        [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}
-    else
-
-        expand_config
-
-        [ -n "${ARP}" ] && \
-            ip link set dev ${REALDEVICE} $(toggle_value arp $ARP)
-
-        if ! set_link_up ${REALDEVICE} ; then
-            net_log $"Failed to bring up ${DEVICE}."
-            exit 1
-        fi
-
-        ethtool_set
-
-        [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}
-
-        if [ "${DEVICE}" = "lo" ]; then
-            SCOPE="scope host"
-        else
-            SCOPE=${SCOPE:-}
-        fi
-
-        if [ -n "$SRCADDR" ]; then
-            SRC="src $SRCADDR"
-        else
-            SRC=
-        fi
-
-        # set IP address(es)
-        for idx in {0..256} ; do
-            if [ -z "${ipaddr[$idx]}" ]; then
-                break
-            fi
-
-            if ! LC_ALL=C ip addr ls ${REALDEVICE} | LC_ALL=C grep -q "${ipaddr[$idx]}/${prefix[$idx]}" ; then
-                if [ "${REALDEVICE}" != "lo" ] && [ "${arpcheck[$idx]}" != "no" ] ; then
-                    ARPING=$(/sbin/arping -c 2 -w ${ARPING_WAIT:-3} -D -I ${REALDEVICE} ${ipaddr[$idx]})
-                    if [ $? = 1 ]; then
-                        ARPINGMAC=$(echo $ARPING |  sed -ne 's/.*\[\(.*\)\].*/\1/p')
-                        net_log $"Error, some other host ($ARPINGMAC) already uses address ${ipaddr[$idx]}."
-                        exit 1
-                    fi
-                fi
-
-                if ! ip addr add ${ipaddr[$idx]}/${prefix[$idx]} \
-                    brd ${broadcast[$idx]:-+} dev ${REALDEVICE} ${SCOPE} label ${DEVICE}; then
-                    net_log $"Error adding address ${ipaddr[$idx]} for ${DEVICE}."
-                fi
-            fi
-
-            if [ -n "$SRCADDR" ]; then
-                sysctl -w "net.ipv4.conf.${SYSCTLDEVICE}.arp_filter=1" >/dev/null 2>&1
-            fi
-
-            # update ARP cache of neighboring computers
-            if ! is_false "${arpupdate[$idx]}" && [ "${REALDEVICE}" != "lo" ]; then
-                /sbin/arping -q -A -c 1 -w ${ARPING_UPDATE_WAIT:-3} -I ${REALDEVICE} ${ipaddr[$idx]}
-                ( sleep 2;
-                /sbin/arping -q -U -c 1 -w ${ARPING_UPDATE_WAIT:-3} -I ${REALDEVICE} ${ipaddr[$idx]} ) > /dev/null 2>&1 < /dev/null &
-            fi
-
-            # set lifetime of address to forever
-            ip addr change ${ipaddr[$idx]}/${prefix[$idx]} dev ${REALDEVICE} valid_lft forever preferred_lft forever
-        done
-
-        # Set a default route.
-        if [ "${DEFROUTE}" != "no" ] && [ -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${REALDEVICE}" ]; then
-            # set up default gateway. replace if one already exists
-            if [ -n "${GATEWAY}" ] && [ "$(ipcalc --network ${GATEWAY} ${netmask[0]} 2>/dev/null)" = "NETWORK=${NETWORK}" ]; then
-                ip route replace default ${METRIC:+metric $METRIC} \
-                    ${EXTRA_ROUTE_OPTS} \
-                    via ${GATEWAY} ${WINDOW:+window $WINDOW} ${SRC} \
-                    ${GATEWAYDEV:+dev $GATEWAYDEV} ||
-                    net_log $"Error adding default gateway ${GATEWAY} for ${DEVICE}."
-            elif [ "${GATEWAYDEV}" = "${DEVICE}" ]; then
-                ip route replace default ${METRIC:+metric $METRIC} \
-                    ${EXTRA_ROUTE_OPTS} \
-                    ${SRC} ${WINDOW:+window $WINDOW} dev ${REALDEVICE} ||
-                    net_log $"Error adding default gateway for ${REALDEVICE}."
-            fi
-        fi
-    fi
-fi
-
-# Add Zeroconf route.
-if [ -z "${NOZEROCONF}" -a "${ISALIAS}" = "no" -a "${REALDEVICE}" != "lo" ]; then
-    ip route add 169.254.0.0/16 dev ${REALDEVICE} metric $((1000 + $(cat /sys/class/net/${REALDEVICE}/ifindex))) scope link
-fi
-
-if [ "${TYPE}" = "Bridge" ]; then
-    for arg in $BRIDGING_OPTS ; do
-        key=${arg%%=*};
-        value=${arg##*=};
-        if [ "${key}" = "multicast_router" -o "${key}" = "hash_max" -o "${key}" = "multicast_snooping" ]; then
-            echo $value > /sys/class/net/${DEVICE}/bridge/$key
-        fi
-    done
-fi
-
-# IPv6 initialisation?
-/etc/sysconfig/network-scripts/ifup-ipv6 ${CONFIG}
-if is_true "${DHCPV6C}" && [ -x /sbin/dhclient ]; then
-
-    # Assign interface into a firewalld zone so we can
-    # obtain the IPv6 via DHCPv6 (empty ZONE means default):
-    if [ "${REALDEVICE}" != "lo" ]; then
-        dbus-send --print-reply --system --dest=org.fedoraproject.FirewallD1 \
-                  /org/fedoraproject/FirewallD1 \
-                  org.fedoraproject.FirewallD1.zone.changeZoneOfInterface \
-                  string:"${ZONE}" string:"${DEVICE}" \
-                  > /dev/null 2>&1
-    fi
-
-    generate_config_file_name 6
-    generate_lease_file_name 6
-    echo
-    echo -n $"Determining IPv6 information for ${DEVICE}..."
-
-    # Initialize the dhclient args for IPv6 and obtain the hostname options if needed:
-    DHCLIENTARGS="-6 -1 ${DHCPV6C_OPTIONS} ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /run/dhclient6-${DEVICE}.pid ${DEVICE}"
-    set_hostname_options DHCLIENTARGS
-
-    if /sbin/dhclient $DHCLIENTARGS; then
-        echo $" done."
-    else
-        echo $" failed."
-        if [ "${dhcpipv4}" = "good" -o -n "${IPADDR}" ]; then
-            net_log "Unable to obtain IPv6 DHCP address ${DEVICE}." warning
-        else
-            exit 1
-        fi
-    fi
-fi
-
-exec /etc/sysconfig/network-scripts/ifup-post ${CONFIG} ${2}

sysconfig/network-scripts/ifup-ippp

@@ -1,384 +0,0 @@
-#! /bin/bash
-#
-# ifup-ippp
-# 
-# This script is normally called from the ifup script when it detects an ippp device.
-
-. /etc/init.d/functions
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-# Get global network configuration
-[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
-
-GATEWAY=""
-
-# set device
-CONFIG=$1
-[ -f "${CONFIG}" ] || CONFIG=ifcfg-${1}
-source_config
-
-if [ "${2}" = "boot" -a "${ONBOOT}" = "no" ]; then
-    exit
-fi
-
-if [ ! -f /var/lock/subsys/isdn ] && [ -x /etc/init.d/isdn ] ; then
-    /etc/init.d/isdn start
-fi
-
-# check that ipppd is available for syncppp 
-if [ "$ENCAP" = "syncppp" ]; then
-    if [ ! -x /sbin/ipppd ] && [ ! -x /usr/sbin/ipppd ] ; then
-        /usr/bin/logger -p daemon.info -t ifup-ippp "ipppd does not exist or is not executable"
-        exit 1
-    fi
-fi
-
-# check that isdnctrl is available
-if [ ! -x /sbin/isdnctrl ] && [ ! -x /usr/sbin/isdnctrl ] ; then
-    /usr/bin/logger -p daemon.info -t ifup-ippp "isdnctrl does not exist or is not executable"
-    exit 1
-fi
-
-# check all ISDN devices
-if ! isdnctrl list all >/dev/null 2>&1 ; then
-    /usr/bin/logger -p daemon.info -t ifup-ippp "cannot list ISDN devices"
-    exit 1
-fi
-
-# check if device already is configured
-isdnctrl list $DEVICE >/dev/null 2>&1 && exit 0
-
-function log_echo()
-{
-    /usr/bin/logger -p daemon.info -t ifup-ippp $"$*"
-}
-
-function log_isdnctrl()
-{
-    /usr/bin/logger -p daemon.info -t ifup-ippp isdnctrl $*
-    isdnctrl $* >/dev/null 2>&1 || exit 1
-}
-
-function create_option_file()
-{
-    umask 066
-    echo "$1" > /etc/ppp/ioption-secret-$DEVICE
-    umask 022
-}
-
-function start_ibod()
-{
-    # don't start ibod, if it's running
-    [ -f /var/lock/subsys/ibod ] && return
-
-    device=$1
-    if [ -f /etc/isdn/ibod.cf ] && [ -x /usr/sbin/ibod ] ; then
-        ibod $device &
-        pid=$(pidof ibod)
-        [ -n "$pid" ] && touch /var/lock/subsys/ibod
-    fi
-}
-
-function addprovider()
-{
-    options=
-    if [ -z "$PHONE_OUT" ]; then
-        log_echo "Error: $1: no outgoing phone number set"
-        return 1
-    fi
-
-    # set the encapsulation mode
-    [ -z "$ENCAP" ] && ENCAP="syncppp"
-
-    # set the dial mode
-    [ -z "$DIALMODE" ] && DIALMODE="off"
-
-    [ "$AUTH" = "none" -o "$AUTH" = "noauth" -o -z "$AUTH" ] && AUTH="-pap -chap"
-
-    # set layer-2/3 protocol 
-    [ -z "$L2_PROT" ] && L2_PROT="hdlc"
-    [ -z "$L3_PROT" ] && L3_PROT="trans"
-
-    # check local/remote IP
-    [ -z "$IPADDR" ] && IPADDR="0.0.0.0"
-    [ -z "$GATEWAY" ] && GATEWAY="0.0.0.0"
-
-    # set default route
-    [ "$DEFROUTE" = "yes" ] && options="$options defaultroute deldefaultroute"
-
-    # set authentication
-    _auth=$(echo "$AUTH" | sed 's/[a-z -]*//g')
-    if [ -n "$_auth" ]; then
-        if [ -z "$USER" -a "$DIALIN" != "on" ]; then
-            log_echo " Error: $1 (syncppp) user is not set"
-            return 1
-        fi
-        if [ "$DIALIN" != "on" ]; then
-            # we should hide the user name, so i add user name to option file.
-            if [ "$AUTH" = "-pap +chap" ]; then
-                create_option_file "name \"$USER\""
-            else
-                create_option_file "user \"$USER\""
-            fi
-            options="$options file /etc/ppp/ioption-secret-$DEVICE"
-        fi
-
-        # authentication options:
-        # +pap and/or +chap does not work correct by dialout - remove
-        # them if it's configured as dialout
-        [ "$DIALIN" = "on" ] || AUTH=$(echo "$AUTH" | sed 's/+[a-z]*//g')
-    fi
-
-    # add ISDN device 
-    log_isdnctrl addif $DEVICE
-
-    # set local MSN
-    [ -z "$MSN" ]  || log_isdnctrl eaz $DEVICE $MSN
-
-    # set dialout numbers
-    if echo $COUNTRYCODE | grep ":" >/dev/null 2>&1 ; then
-        COUNTRYCODE="$(echo $COUNTRYCODE | cut -f 2 -d ':')"
-        [ "$COUNTRYCODE" = "0" ] && COUNTRYCODE=
-    else
-        COUNTRYCODE=
-    fi
-    for i in $PHONE_OUT; do
-        log_isdnctrl addphone $DEVICE out $COUNTRYCODE$PREFIX$AREACODE$i
-    done
-    for i in $PHONE_IN; do
-        log_isdnctrl addphone $DEVICE in $i
-    done
-
-    # set layer-2/3 protocol
-    log_isdnctrl l2_prot $DEVICE $L2_PROT
-    log_isdnctrl l3_prot $DEVICE $L3_PROT
-
-    # set encapsulation
-    log_isdnctrl encap $DEVICE $ENCAP
-
-    # set dialmode
-    log_isdnctrl dialmode $DEVICE $DIALMODE
-
-    [ -n "$SECURE" ] && log_isdnctrl secure $DEVICE $SECURE
-    [ -n "$HUPTIMEOUT" ] && log_isdnctrl huptimeout $DEVICE $HUPTIMEOUT
-    [ -n "$CHARGEHUP" ] && log_isdnctrl chargehup $DEVICE $CHARGEHUP
-    [ -n "$CHARGEINT" ] && log_isdnctrl chargeint $DEVICE $CHARGEINT
-
-    [ -n "$IHUP" ] && log_isdnctrl ihup $DEVICE $IHUP
-
-    # set the number of dial atempts for each number
-    [ -n "$DIALMAX" ] && log_isdnctrl dialmax $DEVICE $DIALMAX
-
-    # set callback
-    if [ "$CALLBACK" = "out" -o "$CALLBACK" = "in" ] ; then
-        log_isdnctrl callback $DEVICE $CALLBACK
-    else
-        log_isdnctrl callback $DEVICE off
-    fi
-    [ -n "$CBDELAY" ] && log_isdnctrl cbdelay $DEVICE $CBDELAY
-    [ -n "$CBHUP" ] && log_isdnctrl cbhup $DEVICE $CBHUP
-
-    options="$options ipparam $DEVNAME"
-
-    [ "$ENCAP" = "syncppp" ] && log_isdnctrl pppbind $DEVICE
-
-    if [ "$IPADDR" = "0.0.0.0" ]; then
-        options="$options ipcp-accept-local"
-    else
-        if [ "$DIALIN" != "on" ]; then
-            options="$options noipdefault"
-        fi
-    fi
-    # Add device
-    options="$options /dev/$DEVICE"
-
-    # set channel bundling
-    if [ "$BUNDLING" = "yes" -o "$BUNDLING" = "on" ] && [ -n "$SLAVE_DEVICE" ]; then
-        [ -z "$SLAVE_MSN" ] && SLAVE_MSN="$MSN"
-        [ -z "$SLAVE_PHONE_OUT" ] && SLAVE_PHONE_OUT="$PHONE_OUT"
-        [ -z "$SLAVE_PHONE_IN" ] && SLAVE_PHONE_IN="$PHONE_IN"
-        [ -z "$SLAVE_HUPTIMEOUT" ] && SLAVE_HUPTIMEOUT="$HUPTIMEOUT"
-        [ -z "$SLAVE_CHARGEHUP" ] && SLAVE_CHARGEHUP="$CHARGEHUP"
-        [ -z "$SLAVE_CHARGEINT" ] && SLAVE_CHARGEINT="$CHARGEINT"
-        [ -z "$SLAVE_CBHUP" ] && SLAVE_CBHUP="$CBHUP"
-        [ -z "$SLAVE_IHUP" ] && SLAVE_IHUP="$IHUP"
-        [ -z "$SLAVE_DIALMAX" ] && SLAVE_DIALMAX="$DIALMAX"
-        [ -z "$SLAVE_CALLBACK" ] && SLAVE_CALLBACK="$CALLBACK"
-        [ -z "$SLAVE_CBDELAY" ] && SLAVE_CBDELAY="$CBDELAY"
-        if [ "$DIALIN" != "on" ] ; then
-            [ -z "$SLAVE_DIALMODE" ] && SLAVE_DIALMODE="auto"
-        else
-            # Master should not dial by default on incoming MPPP
-            [ -z "$SLAVE_DIALMODE" ] && SLAVE_DIALMODE="$DIALMODE"
-        fi
-
-        slave=$SLAVE_DEVICE
-        options="$options /dev/$slave +mp"
-
-        # Create slave and set options
-        log_isdnctrl addslave $DEVICE $slave
-        [ -z $SLAVE_MSN ] || log_isdnctrl eaz $slave $SLAVE_MSN
-
-        # set phone number
-        for i in $SLAVE_PHONE_OUT; do
-            log_isdnctrl addphone $slave out $COUNTRYCODE$PREFIX$AREACODE$i
-        done
-        for i in $SLAVE_PHONE_IN; do
-            log_isdnctrl addphone $slave in $i
-        done
-
-        # set layer-2/3 protocol
-        log_isdnctrl l2_prot $slave $L2_PROT
-        log_isdnctrl l3_prot $slave $L3_PROT
-
-        # set encapsulation
-        log_isdnctrl encap $slave $ENCAP
-
-        # set dial mode
-        log_isdnctrl dialmode $slave $SLAVE_DIALMODE
-
-        [ -n "$SECURE" ] && log_isdnctrl secure $slave $SECURE
-        [ -n "$SLAVE_HUPTIMEOUT" ] && log_isdnctrl huptimeout $slave $SLAVE_HUPTIMEOUT
-        [ -n "$SLAVE_CHARGEHUP" ] && log_isdnctrl chargehup $slave $SLAVE_CHARGEHUP
-        [ -n "$SLAVE_CHARGEINT" ] && log_isdnctrl chargeint $slave $SLAVE_CHARGEINT
-        [ -n "$SLAVE_IHUP" ] && log_isdnctrl ihup $slave $SLAVE_IHUP
-        [ -n "$SLAVE_DIALMAX" ] && log_isdnctrl dialmax $slave $SLAVE_DIALMAX
-
-        # set callback
-        [ -n "$SLAVE_CBHUP" ] && log_isdnctrl cbhup $slave $SLAVE_CBHUP
-        [ -n "$SLAVE_CALLBACK" ] || SLAVE_CALLBACK="off"
-        log_isdnctrl callback $slave $SLAVE_CALLBACK
-        [ -n "$SLAVE_CBDELAY" ] && log_isdnctrl cbdelay $DEVICE $SLAVE_CBDELAY
-
-        # options for master device
-        [ -n "$SLAVE_DELAY" ] && log_isdnctrl sdelay $DEVICE $SLAVE_DELAY
-        [ -n "$SLAVE_TRIGGER" ] && log_isdnctrl trigger $DEVICE $SLAVE_TRIGGER
-    fi
-
-    if [ "$GATEWAY" = "0.0.0.0" ]; then
-        if [ "$DIALIN" != "on" ]; then
-            options="$options ipcp-accept-remote"
-        fi
-        options="$IPADDR:$GATEWAY $options"
-    else
-        options="$options $IPADDR:$GATEWAY"
-    fi
-
-    # Van Jacobson style TCP/IP header compression and
-    # VJ connection-ID compression
-    [ "$VJ" = "off" ] && options="$options -vj"
-    [ "$VJCCOMP" = "off" ] && options="$options -vjccomp"
-
-    # Address/Control compression, protocol field compression,
-    [ "$AC" = "off" ] && options="$options -ac"
-    [ "$PC" = "off" ] && options="$options -pc"
-
-    # BSD-Compression scheme
-    if [ "$BSDCOMP" = "on" ] ; then
-        options="$options bsdcomp 9,9"
-    else
-        options="$options -bsdcomp"
-    fi
-    # Stac compression
-    if [ "$LZS" = "on" ] ; then
-        # supports LZS check mode 3 and 4
-        [ -n "$LZS_MODE" ] || LZS_MODE="4"
-        [ "$LZS_MODE" = "3" ] && options="$options lzs 1"
-        [ "$LZS_MODE" = "4" ] && options="$options lzs 1:4"
-    fi
-
-    # Set max receive and max transmit units
-    [ -n "$MRU" ] && options="$options mru $MRU"
-    [ -n "$MTU" ] && options="$options mtu $MTU"
-
-    # set CBCP protocoll
-    if [ "$CBCP" = "on" ] ; then
-        if [ -n "$CBCP_MSN" ] ; then
-            # User managed callback
-            options="$options callback $CBCP_MSN"
-        else
-            # admin managed callback, it's enabled by default
-            options="$options callback 6"
-        fi
-    else
-        # Disable CBCP
-        options="$options -callback-cbcp"
-    fi
-
-    # set CCP protocoll
-    [ "$CCP" = "off" ] && options="$options noccp"
-
-    # set host name
-    [ -n "$ISDN_HOSTNAME" ] && options="$options remotename $ISDN_HOSTNAME"
-
-    # Set authentication
-    for i in $AUTH ; do
-        options="$options $i"
-    done
-
-    # add ppp options
-    for i in $PPPOPTIONS ; do
-        options="$options $i"
-    done
-
-    # check dns entry
-    if [ -z "$DNS1" -a -z "$DNS2" ]; then
-        options="$options ms-get-dns"
-    else
-        [ -n "$DNS1" ] && options="$options ms-dns $DNS1"
-        [ -n "$DNS2" ] && options="$options ms-dns $DNS2"
-    fi
-
-    # set debug 
-    [ "$DEBUG" = "yes" ] && options="-d $options"
-
-    # set netmask, if available
-    [ -n "$NETMASK" ] && {
-        val=$(ipcalc --prefix $IPADDR $NETMASK)
-        pfx=${val##PREFIX=}
-    }
-    # activate ISDN device
-    /usr/bin/logger -p daemon.info -t ifup-ippp "ip addr add $IPADDR peer $GATEWAY${pfx:/$pfx} dev $DEVICE"
-    ip addr add $IPADDR peer $GATEWAY${pfx:/$pfx} dev $DEVICE
-    set_link_up $DEVICE
-
-    if [ "$ENCAP" = "syncppp" ]; then
-        # start ipppd daemon
-        /usr/bin/logger -p daemon.info -t ifup-ippp "ipppd $options $netmask"
-        ipppd $options $netmask >/dev/null 2>&1
-
-        # start ibod daemon
-        if [ "$DIALIN" != "on" ]; then
-            [ "$BUNDLING" = "yes" -o "$BUNDLING" = "on" ] && [ -n "$SLAVE_DEVICE" ] && start_ibod $DEVICE
-        fi
-    fi
-
-    # set default gateway for dial on demand
-    if [ "$DIALMODE" = "auto" ] ; then
-        echo 1 > /proc/sys/net/ipv4/ip_dynaddr
-        if  [ "$DEFROUTE" = "yes" ] ; then
-            if [ "$GATEWAY" = "0.0.0.0" ]; then
-                ip route replace default ${METRIC:+metric $METRIC} dev ${DEVICE} >/dev/null 2>&1
-            else
-                ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY} dev ${DEVICE} >/dev/null 2>&1
-            fi
-        fi
-    fi
-
-    # Setup IPv6
-    if ! is_false "$IPV6INIT" && ! [[ -z "$IPV6ADDR" ]]; then
-        # Native IPv6 use of device configured, check of encapsulation required    
-        if [ "$ENCAP" = "syncppp" ]; then
-            echo $"Warning: ipppd (kernel 2.4.x and below) doesn't support IPv6 using encapsulation 'syncppp'"
-        elif [ "$ENCAP" = "rawip" ]; then
-            echo $"Warning: link doesn't support IPv6 using encapsulation 'rawip'"
-        fi
-    fi
-    /etc/sysconfig/network-scripts/ifup-ipv6 $CONFIG
-}
-
-addprovider || exit 1
-
-exit 0

sysconfig/network-scripts/ifup-ipv6

@@ -1,316 +0,0 @@
-#!/bin/bash
-#
-# ifup-ipv6
-#
-#
-# Taken from:
-# (P) & (C) 2000-2006 by Peter Bieringer <pb@bieringer.de>
-#
-#  You will find more information on the initscripts-ipv6 homepage at
-#   http://www.deepspace6.net/projects/initscripts-ipv6.html
-#
-# RHL integration assistance by Pekka Savola <pekkas@netcore.fi>
-#
-# Version: 2006-07-20
-#
-# Note: if called (like normally) by /etc/sysconfig/network-scripts/ifup
-#        exit codes aren't handled by "ifup"
-#
-# Uses following information from "/etc/sysconfig/network":
-#  IPV6_DEFAULTDEV=<device>: controls default route (optional)
-#  IPV6_DEFAULTGW=<address>: controls default route (optional)
-#
-# Uses following information from "/etc/sysconfig/network-scripts/ifcfg-$1":
-#  IPV6INIT=yes|no: controls IPv6 configuration for this interface
-#  IPV6ADDR=<IPv6 address>[/<prefix length>]: specify primary static IPv6 address
-#  IPV6ADDR_SECONDARIES="<IPv6 address>[/<prefix length>] ..." (optional)
-#  IPV6_ROUTER=yes|no: controls IPv6 autoconfiguration (no: multi-homed interface without routing)
-#  IPV6_AUTOCONF=yes|no: controls IPv6 autoconfiguration
-#   defaults:
-#    IPV6FORWARDING=yes: IPV6_AUTOCONF=no, IPV6_ROUTER=yes
-#    IPV6FORWARDING=no: IPV6_AUTOCONF=yes
-#  IPV6_MTU=<MTU for IPv6>: controls IPv6 MTU for this link (optional)
-#  IPV6_PRIVACY="rfc3041": control IPv6 privacy (optional)
-#    This script only supports "rfc3041" (if kernel supports it)
-#
-# Optional for 6to4 tunneling (hardwired name of tunnel device is "tun6to4"):
-#  IPV6TO4INIT=yes|no: controls 6to4 tunneling setup
-#  IPV6TO4_RELAY=<IPv4 address>: IPv4 address of the remote 6to4 relay (default: 192.88.99.1)
-#  IPV6TO4_MTU=<MTU for IPv6>: controls IPv6 MTU for the 6to4 link (optional, default is MTU of interface - 20)
-#  IPV6TO4_IPV4ADDR=<IPv4 address>: overwrite local IPv4 address (optional)
-#  IPV6TO4_ROUTING="<device>-<suffix>/<prefix length> ...": information to setup additional interfaces
-#    Example: IPV6TO4_ROUTING="eth0-:f101::1/64 eth1-:f102::1/64"
-#
-# Optional for 6to4 tunneling to trigger radvd:
-#  IPV6_CONTROL_RADVD=yes|no: controls radvd triggering (optional)
-#  IPV6_RADVD_PIDFILE=<file>: PID file of radvd for sending signals, default is "/run/radvd/radvd.pid" (optional)
-#  IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd (optional, default is SIGHUP)
-#
-#  Required version of radvd to use 6to4 prefix recalculation
-#   0.6.2p3 or newer supporting option "Base6to4Interface"
-#  Required version of radvd to use dynamic ppp links
-#   0.7.0 + fixes or newer
-#
-
-
-. /etc/sysconfig/network
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-CONFIG=$1
-[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
-source_config
-
-REALDEVICE=${DEVICE%%:*}
-DEVICE=$REALDEVICE
-
-# Test whether IPv6 configuration is disabled for this interface
-is_false "$IPV6INIT" && exit 0
-
-[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1
-. /etc/sysconfig/network-scripts/network-functions-ipv6
-
-
-# IPv6 test, module loaded, exit if system is not IPv6-ready
-ipv6_test || exit 1
-
-# Test device status
-ipv6_test_device_status $DEVICE
-if [ $? != 0 -a $? != 11 ]; then
-    # device doesn't exist or other problem occurs
-    exit 1
-fi
-
-# Setup IPv6 address on specified interface
-if [ -n "$IPV6ADDR" ]; then
-    ipv6_add_addr_on_device $DEVICE $IPV6ADDR || exit 1
-fi
-
-# Get current global IPv6 forwarding
-ipv6_global_forwarding_current="$(/sbin/sysctl -e -n net.ipv6.conf.all.forwarding)"
-
-# Set some proc switches depending on defines
-if [ "$IPV6FORWARDING" = "yes" ]; then
-    # Global forwarding should be enabled
-
-    # Check, if global IPv6 forwarding was already set by global script
-    if [ $ipv6_global_forwarding_current -ne 1 ]; then
-        net_log $"Global IPv6 forwarding is enabled in configuration, but not currently enabled in kernel"
-        net_log $"Please restart network with '/sbin/service network restart'"
-    fi
-
-    ipv6_local_forwarding=1
-    ipv6_local_auto=0
-    ipv6_local_accept_ra=0
-    if [ "$IPV6_ROUTER" = "no" ]; then
-        ipv6_local_forwarding=0
-    fi
-    if [ "$IPV6_AUTOCONF" = "yes" ]; then
-        ipv6_local_auto=1
-        ipv6_local_accept_ra=2
-    fi
-else
-    # Global forwarding should be disabled
-
-    # Check, if global IPv6 forwarding was already set by global script
-    if [ $ipv6_global_forwarding_current -ne 0 ]; then
-        net_log $"Global IPv6 forwarding is disabled in configuration, but not currently disabled in kernel"
-        net_log $"Please restart network with '/sbin/service network restart'"
-    fi
-
-    ipv6_local_forwarding=0
-    ipv6_local_auto=1
-    ipv6_local_accept_ra=1
-    if [ "$IPV6_AUTOCONF" = "no" ]; then
-        ipv6_local_auto=0
-        if [ ! "$IPV6_FORCE_ACCEPT_RA" = "yes" ]; then
-            ipv6_local_accept_ra=0
-        fi
-    fi
-fi
-
-if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then
-    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=$ipv6_local_forwarding >/dev/null 2>&1
-    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=$ipv6_local_accept_ra >/dev/null 2>&1
-    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=$ipv6_local_auto >/dev/null 2>&1
-    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.autoconf=$ipv6_local_auto >/dev/null 2>&1
-fi
-
-# Set IPv6 MTU, if given
-if [ -n "$IPV6_MTU" ]; then
-    ipv6_set_mtu $DEVICE $IPV6_MTU
-fi
-
-# Setup additional IPv6 addresses from list, if given
-if [ -n "$IPV6ADDR_SECONDARIES" ]; then
-    for ipv6addr in $IPV6ADDR_SECONDARIES; do
-        ipv6_add_addr_on_device $DEVICE $ipv6addr
-    done
-fi
-
-# Enable IPv6 RFC3041 privacy extensions if desired
-if [ "$IPV6_PRIVACY" = "rfc3041" ]; then
-    if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then
-        /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.use_tempaddr=2 >/dev/null 2>&1
-        if [ $? -ne 0 ]; then
-            net_log $"Cannot enable IPv6 privacy method '$IPV6_PRIVACY', not supported by kernel"
-        fi
-    fi
-fi
-
-# Setup default IPv6 route, check are done by function
-if [ -n "$IPV6_DEFAULTDEV" -o -n "$IPV6_DEFAULTGW" ]; then
-    ipv6_set_default_route "$IPV6_DEFAULTGW" "$IPV6_DEFAULTDEV" "$DEVICE"
-fi
-
-# Setup additional static IPv6 routes on specified interface, if given
-if [ -f /etc/sysconfig/static-routes-ipv6 ]; then
-    LC_ALL=C grep -w "^$DEVICE" /etc/sysconfig/static-routes-ipv6 | while read device args; do
-        ipv6_add_route $args $DEVICE
-    done
-fi
-
-# Setup of 6to4, if configured
-if [ "$IPV6TO4INIT" = "yes" ]; then
-    valid6to4config="yes"
-
-    # Test device status of 6to4 tunnel
-    ipv6_test_device_status tun6to4
-    if [ $? = 0 ]; then
-        # device is already up
-        net_log $"Device 'tun6to4' (from '$DEVICE') is already up, shutdown first"
-        exit 1
-    fi
-
-    # Get IPv4 address for global 6to4 prefix calculation
-    if [ -n "$IPV6TO4_IPV4ADDR" ]; then
-        # Take special configured from config file (precedence 1)
-        ipv4addr="$IPV6TO4_IPV4ADDR"
-
-        # Get local IPv4 address from interface
-        ipv4addrlocal="$(ipv6_get_ipv4addr_of_device $DEVICE)"
-        if [ -z "$ipv4addrlocal" ]; then
-            # Take configured from config file
-            ipv4addrlocal="$IPADDR"
-        fi
-    else
-        # Get IPv4 address from interface first (has precedence 2)
-        ipv4addr="$(ipv6_get_ipv4addr_of_device $DEVICE)"
-        if [ -z "$ipv4addr" ]; then
-            # Take configured from config file (precedence 3)
-            ipv4addr="$IPADDR"
-        fi
-        ipv4addrlocal="$ipv4addr"
-    fi
-
-    if [ -n "$ipv4addr" ]; then
-        if ! ipv6_test_ipv4_addr_global_usable $ipv4addr; then
-            net_log $"Given IPv4 address '$ipv4addr' is not globally usable" info
-            valid6to4config="no"
-        fi
-        if [ -z "$IPV6TO4_RELAY" ]; then
-            IPV6TO4_RELAY="192.88.99.1"
-        fi
-
-        # Check/generate relay address
-        ipv6to4_relay="$(ipv6_create_6to4_relay_address $IPV6TO4_RELAY)"
-        if [ $? -ne 0 ]; then
-            valid6to4config="no"
-        fi
-    else
-        net_log $"IPv6to4 configuration needs an IPv4 address on related interface or otherwise specified" info
-        valid6to4config="no"
-    fi
-
-    # Setup 6to4 tunnel (hardwired name is "tun6to4"), if config is valid
-    if [ "$valid6to4config" = "yes" ]; then
-        # Get MTU of master device
-        ipv4mtu="$(/sbin/ip link show dev $DEVICE | awk '/\<mtu\>/ { print $5 }')"
-        if [ -n "$ipv4mtu" ]; then
-            # IPv6 tunnel MTU is IPv4 MTU minus 20 for IPv4 header
-            tunnelmtu=$(($ipv4mtu-20))
-        fi
-
-        if [ -n "$IPV6TO4_MTU" ]; then
-            if [ $IPV6TO4_MTU -gt $tunnelmtu ]; then
-                net_log $"Warning: configured MTU '$IPV6TO4_MTU' for 6to4 exceeds maximum limit of '$tunnelmtu', ignored" warning
-            else
-                tunnelmtu=$IPV6TO4_MTU
-            fi
-        fi
-
-        ipv6_add_6to4_tunnel tun6to4 $ipv4addr "" $tunnelmtu $ipv4addrlocal || exit 1
-
-        # Add route to for compatible addresses (removed later again)
-        ipv6_add_route "::/96" "::" tun6to4
-
-        # Add default route, if device matches
-        if [ "$IPV6_DEFAULTDEV" = "tun6to4" ]; then
-            if [ -n "$IPV6_DEFAULTGW" ]; then
-                net_log $"Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored" warning
-            fi
-            ipv6_set_default_route $ipv6to4_relay tun6to4
-        fi
-
-        # Add static routes
-        if [ -f /etc/sysconfig/static-routes-ipv6 ]; then
-            LC_ALL=C grep -w "^tun6to4" /etc/sysconfig/static-routes-ipv6 | while read device network gateway; do
-                if [ -z "$network" ]; then
-                    continue
-                fi
-                if [ -z "$gateway" ]; then
-                    gateway="$ipv6to4_relay"
-                fi
-                ipv6_add_route $network $gateway tun6to4
-            done
-        fi
-
-        # Setup additional static IPv6 routes (newer config style)
-        if [ -f "/etc/sysconfig/network-scripts/route6-tun6to4" ]; then
-            sed -ne 's/#.*//' -e '/[^[:space:]]/p' /etc/sysconfig/network-scripts/route6-tun6to4 | while read line; do
-                if echo "$line" | LC_ALL=C grep -vq 'via'; then
-                    # Add gateway if missing
-                    line="$line via $ipv6to4_relay"
-                fi
-                /sbin/ip -6 route add $line
-            done
-        fi
-
-        # Cleanup autmatically generated autotunnel (not needed for 6to4)
-        /sbin/ip -6 route del ::/96 dev tun6to4
-        /sbin/ip -6 addr del "::$ipv4addrlocal/128" dev tun6to4
-
-        if [ "$IPV6_CONTROL_RADVD" = "yes" ]; then
-            # RADVD is in use, so forwarding of IPv6 packets should be enabled, display warning
-            if [ $ipv6_global_forwarding_current -ne 1 ]; then
-                net_log $"Using 6to4 and RADVD IPv6 forwarding usually should be enabled, but it isn't" warning
-            fi
-
-            if [ -n "$IPV6TO4_ROUTING" ]; then
-                ipv6to4prefix="$(ipv6_create_6to4_prefix $ipv4addr)"
-                if [ -n "$ipv6to4prefix" ]; then
-                    # Add route to local networks
-                    for devsuf in $IPV6TO4_ROUTING; do
-                        dev="${devsuf%%-*}"
-                        suf="$(echo $devsuf | awk -F- '{ print $2 }')"
-                        ipv6_add_addr_on_device ${dev} ${ipv6to4prefix}${suf}
-                    done
-                else
-                    net_log $"Error occurred while calculating the IPv6to4 prefix"
-                fi
-            else
-                net_log $"radvd control enabled, but config is not complete"
-            fi
-
-            # Control running radvd
-            ipv6_trigger_radvd up "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE
-        fi
-    else
-        net_log $"6to4 configuration is not valid"
-        exit 1
-    fi
-fi
-
-#wait for all global IPv6 addresses to leave the "tentative" state
-ipv6_wait_tentative $DEVICE

sysconfig/network-scripts/ifup-isdn

@@ -1 +0,0 @@
-ifup-ippp

sysconfig/network-scripts/ifup-plip

@@ -1,27 +0,0 @@
-#!/bin/sh
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-CONFIG=$1
-source_config
-
-if [ "foo$2" = "fooboot" -a "${ONBOOT}" = "no" ]; then
-    exit
-fi
-
-[ -z "$PREFIX" ] && eval $(/bin/ipcalc --prefix ${IPADDR} ${NETMASK})
-ip addr add ${IPADDR} peer ${REMIP}/${PREFIX} dev ${DEVICE}
-set_link_up ${DEVICE}
-ip route add ${NETWORK} dev ${DEVICE}
-
-. /etc/sysconfig/network
-
-if [ "${GATEWAY}" != "" ]; then
-    if [ "${GATEWAYDEV}" = "" -o "${GATEWAYDEV}" = "${DEVICE}" ]; then
-        # set up default gateway
-        ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY}
-    fi
-fi
-
-/etc/sysconfig/network-scripts/ifup-post $1

sysconfig/network-scripts/ifup-plusb

@@ -1,43 +0,0 @@
-#!/bin/sh
-#
-# /etc/sysconfig/network-scripts/ifup-plusb
-#
-# the plusb network driver is a USB host-host cable based on the Prolific
-# chip. It works a lot like the plip driver.  
-#
-# To get the plusb module to load automatically at boot, you will need to
-# add the following lines to /etc/conf.modules:
-#
-# alias plusb0 plusb
-#
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-CONFIG=$1
-source_config
-
-if [ "foo$2" = "fooboot" -a "${ONBOOT}" = "no" ]
-then
-    exit
-fi
-
-[ -z "$PREFIX" ] && eval $(/bin/ipcalc --prefix ${IPADDR} ${NETMASK})
-
-if [ ${BROADCAST} != ""  ]  ; then
-    ip addr add ${IPADDR} peer ${REMIP}/${PREFIX} broadcast ${BROADCAST} dev ${DEVICE}
-else
-    ip addr add ${IPADDR} peer ${REMIP}/${PREFIX} dev ${DEVICE}
-fi
-set_link_up ${DEVICE}
-
-. /etc/sysconfig/network
-
-if [ "${GATEWAY}" != "" ]; then
-    if [ "${GATEWAYDEV}" = "" -o "${GATEWAYDEV}" = "${DEVICE}" ]; then
-        # set up default gateway
-        ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY}
-    fi
-fi
-
-/etc/sysconfig/network-scripts/ifup-post $1

sysconfig/network-scripts/ifup-post

@@ -1,148 +0,0 @@
-#!/bin/bash
-
-# Source the general functions for is_true() and is_false():
-. /etc/init.d/functions
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-[ -f ../network ] && . ../network
-
-unset REALDEVICE
-if [ "$1" = --realdevice ] ; then
-    REALDEVICE=$2
-    shift 2
-fi
-
-CONFIG=$1
-source_config
-
-[ -z "$REALDEVICE" ] && REALDEVICE=$DEVICE
-
-if is_false "$ISALIAS"; then
-    /etc/sysconfig/network-scripts/ifup-aliases ${DEVICE} ${CONFIG}
-fi
-
-if ! is_true "$NOROUTESET"; then
-    /etc/sysconfig/network-scripts/ifup-routes ${REALDEVICE} ${DEVNAME}
-fi
-
-
-if ! is_false "${PEERDNS}" || is_true "${RESOLV_MODS}"; then
-    # Obtain the DNS entries when using PPP if necessary:
-    [ -n "${MS_DNS1}" ] && DNS1="${MS_DNS1}"
-    [ -n "${MS_DNS2}" ] && DNS2="${MS_DNS2}"
-
-    # Remove duplicate DNS entries and shift them, if necessary:
-    update_DNS_entries
-
-    # Determine what regexp we should use (for testing below):
-    if   [ -n "${DNS3}" ]; then
-        grep_regexp="[^#]?nameserver[[:space:]]+${DNS1}[^#]?nameserver[[:space:]]+${DNS2}[^#]?nameserver[[:space:]]+${DNS3}"
-    elif [ -n "${DNS2}" ]; then
-        grep_regexp="[^#]?nameserver[[:space:]]+${DNS1}[^#]?nameserver[[:space:]]+${DNS2}"
-    elif [ -n "${DNS1}" ]; then
-        grep_regexp="[^#]?nameserver[[:space:]]+${DNS1}"
-    else
-        # No DNS entries used at all ->> match everything.
-        grep_regexp=".*"
-    fi
-
-    # Test if the search field needs updating, or
-    # if the nameserver entries order should be updated:
-    if [ -n "${DOMAIN}" ] && ! grep -q "^search.*${DOMAIN}.*$" /etc/resolv.conf ||
-        ! tr --delete '\n' < /etc/resolv.conf | grep -E -q "${grep_regexp}"; then
-
-        if tmp_file=$(mktemp); then
-            search_str=''
-
-            while read line; do
-                case ${line} in
-
-                    # Skip nameserver entries when at least one DNS option was given
-                    # (at this stage we know that we have to update all the nameserver
-                    # enries anyway -- see below), or copy them if we are changing just
-                    # the 'search' field in /etc/resolv.conf:
-                    nameserver*)
-                        if [[ "${grep_regexp}" != ".*" ]]; then
-                            continue
-                        else
-                            echo "${line}" >> "${tmp_file}"
-                        fi
-                        ;;
-
-                    domain* | search*)
-                        if [ -n "${DOMAIN}" ]; then
-                            read search value < <(echo ${line})
-                            search_str+=" ${value}"
-                        else
-                            echo "${line}" >> "${tmp_file}"
-                        fi
-                        ;;
-
-                    # Keep the rest of the /etc/resolv.conf as it was:
-                    *)
-                        echo "${line}" >> "${tmp_file}"
-                        ;;
-                esac
-            done < /etc/resolv.conf
-
-            # Insert the domain into 'search' field:
-            if [ -n "${DOMAIN}" ]; then
-                echo "search ${DOMAIN}${search_str}" >> "${tmp_file}"
-            fi
-
-            # Add the requested nameserver entries:
-            [ -n "${DNS1}" ] && echo "nameserver ${DNS1}" >> "${tmp_file}"
-            [ -n "${DNS2}" ] && echo "nameserver ${DNS2}" >> "${tmp_file}"
-            [ -n "${DNS3}" ] && echo "nameserver ${DNS3}" >> "${tmp_file}"
-
-            # Backup resolv.conf only if it doesn't exist already:
-            ! [ -f /etc/resolv.conf.save ] && cp -af /etc/resolv.conf /etc/resolv.conf.save
-
-            # Maintain permissions, but set umask in case it doesn't exist:
-            umask_old=$(umask)
-            umask 022
-
-            # Update the resolv.conf:
-            change_resolv_conf "${tmp_file}"
-
-            rm -f "${tmp_file}"
-            umask ${umask_old}
-            unset tmp_file search_str umask_old
-        else
-            net_log $"/etc/resolv.conf was not updated: failed to create temporary file" 'err' 'ifup-post'
-        fi
-    fi
-
-    unset grep_regexp
-fi
-
-# don't set hostname on ppp/slip connections
-if [ "$2" = "boot" -a \
-        "${DEVICE}" != lo -a \
-        "${DEVICETYPE}" != "ppp" -a \
-        "${DEVICETYPE}" != "slip" ]; then
-    if need_hostname; then
-        IPADDR=$(LANG=C ip -o -4 addr ls dev ${DEVICE} | awk '{ print $4 ; exit }')
-        eval $(/bin/ipcalc --silent --hostname ${IPADDR} ; echo "status=$?")
-        if [ "$status" = "0" ]; then
-            set_hostname $HOSTNAME
-        fi
-    fi
-fi
-
-# Set firewall ZONE for this device (empty ZONE means default):
-if [ "${REALDEVICE}" != "lo" ]; then
-    dbus-send --print-reply --system --dest=org.fedoraproject.FirewallD1 \
-              /org/fedoraproject/FirewallD1 \
-              org.fedoraproject.FirewallD1.zone.changeZoneOfInterface \
-              string:"${ZONE}" string:"${DEVICE}" \
-              > /dev/null 2>&1
-fi
-
-if [ -x /sbin/ifup-local ]; then
-    /sbin/ifup-local ${DEVICE}
-fi
-
-exit 0

sysconfig/network-scripts/ifup-routes

@@ -1,88 +0,0 @@
-#! /bin/bash
-#
-# adds static routes which go through device $1
-
-. /etc/sysconfig/network-scripts/network-functions
-
-if [ -z "$1" ]; then
-    echo $"usage: ifup-routes <net-device> [<nickname>]"
-    exit 1
-fi
-
-MATCH='^[[:space:]]*(\#.*)?$'
-
-handle_file () {
-    . $1
-    routenum=0
-    while [ "x$(eval echo '$'ADDRESS$routenum)x" != "xx" ]; do
-        eval $(ipcalc -p $(eval echo '$'ADDRESS$routenum) $(eval echo '$'NETMASK$routenum))
-        line="$(eval echo '$'ADDRESS$routenum)/$PREFIX"
-        if [ "x$(eval echo '$'GATEWAY$routenum)x" != "xx" ]; then
-            line="$line via $(eval echo '$'GATEWAY$routenum)"
-        fi
-        line="$line dev $2"
-
-        /sbin/ip route add $line || {
-            net_log $"Failed to add route ${line}, using ip route replace instead." warning
-            /sbin/ip route replace $line
-        }
-
-        routenum=$(($routenum+1))
-    done
-}
-
-handle_ip_file() {
-    local f t type= file=$1 proto="-4"
-    f=${file##*/}
-    t=${f%%-*}
-    type=${t%%6}
-    if [ "$type" != "$t" ]; then
-        proto="-6"
-    fi
-    { cat "$file" ; echo ; } | while read line; do
-        if [[ ! "$line" =~ $MATCH ]]; then
-            /sbin/ip $proto $type add $line
-
-            if [ $? != 0 ] && [ "$type" == "route" ] ; then
-                net_log $"Failed to add route ${line}, using ip route replace instead." warning
-                /sbin/ip $proto route replace $line
-            fi
-        fi
-    done
-}
-
-FILES="/etc/sysconfig/network-scripts/route-$1 /etc/sysconfig/network-scripts/route6-$1"
-if [ -n "$2" -a "$2" != "$1" ]; then
-    FILES="$FILES /etc/sysconfig/network-scripts/route-$2 /etc/sysconfig/network-scripts/route6-$2"
-fi
-
-for file in $FILES; do
-    if [ -f "$file" ]; then
-        if grep -Eq '^[[:space:]]*ADDRESS[0-9]+=' $file ; then
-            # new format
-            handle_file $file ${1%:*}
-        else
-            # older format
-            handle_ip_file $file
-        fi
-    fi
-done
-
-
-# Red Hat network configuration format
-NICK=${2:-$1}
-CONFIG="/etc/sysconfig/network-scripts/$NICK.route"
-[ -f $CONFIG ] && handle_file $CONFIG $1
-
-
-# Routing rules
-FILES="/etc/sysconfig/network-scripts/rule-$1 /etc/sysconfig/network-scripts/rule6-$1"
-if [ -n "$2" -a "$2" != "$1" ]; then
-    FILES="$FILES /etc/sysconfig/network-scripts/rule-$2 /etc/sysconfig/network-scripts/rule6-$2"
-fi
-
-for file in $FILES; do
-    if [ -f "$file" ]; then
-        handle_ip_file $file
-    fi
-done

sysconfig/network-scripts/ifup-sit

@@ -1,108 +0,0 @@
-#!/bin/bash
-#
-# ifup-sit
-#
-#
-# Taken from:
-# (P) & (C) 2000-2003 by Peter Bieringer <pb@bieringer.de>
-#
-#  You will find more information on the initscripts-ipv6 homepage at
-#   http://www.deepspace6.net/projects/initscripts-ipv6.html
-#
-# RHL integration assistance by Pekka Savola <pekkas@netcore.fi>
-#
-# Version: 2003-09-08
-#
-# Uses following information from /etc/sysconfig/network:
-#  IPV6_DEFAULTDEV=<device>: controls default route (optional)
-#  IPV6_DEFAULTGW=<address>: controls default route (optional)
-#
-# Uses following information from /etc/sysconfig/network-scripts/ifcfg-$1:
-#  DEVICE=<device>
-#  IPV6INIT=yes|no: controls IPv6 configuration for this interface
-#  IPV6_MTU=<MTU for IPv6>: controls IPv6 MTU for this link (optional)
-#
-#  For static tunnels
-#  IPV6TUNNELIPV4=<IPv4 address>: IPv4 address of remote tunnel endpoint
-#  IPV6TUNNELIPV4LOCAL=<IPv4 address>: (optional) local IPv4 address of tunnel
-#  IPV6ADDR=<IPv6 address>[/<prefix length>]: (optional) local IPv6 address of a numbered tunnel
-#  IPV6ADDR_SECONDARIES="<IPv6 address>[/<prefix length>] ..." (optional) additional local IPv6 addresses
-#
-
-
-. /etc/sysconfig/network
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-CONFIG=$1
-[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
-source_config
-
-# IPv6 don't need aliases anymore, config is skipped
-REALDEVICE=${DEVICE%%:*}
-[ "$DEVICE" != "$REALDEVICE" ] && exit 0
-
-# Test whether IPv6 configuration is disabled for this interface
-is_false "$IPV6INIT" && exit 0
-
-[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1
-. /etc/sysconfig/network-scripts/network-functions-ipv6
-
-
-# IPv6 test, module loaded, exit if system is not IPv6-ready
-ipv6_test || exit 1
-
-# Generic tunnel device sit0 is not supported here
-if [ "$DEVICE" = "sit0" ]; then
-    net_log $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking"
-    exit 1
-fi
-
-if [ -z "$IPV6TUNNELIPV4" ]; then
-    net_log $"Missing remote IPv4 address of tunnel, configuration is not valid"
-    exit 1
-fi
-
-# Test device status
-ipv6_test_device_status $DEVICE
-if [ $? = 0 ]; then
-    # device is already up
-    net_log $"Device '$DEVICE' is already up, please shutdown first"
-    exit 1
-fi
-
-# Create tunnel
-ipv6_add_tunnel_device $DEVICE $IPV6TUNNELIPV4 "" $IPV6TUNNELIPV4LOCAL || exit 1
-
-# Set IPv6 MTU, if given
-if [ -n "$IPV6_MTU" ]; then
-    ipv6_set_mtu $DEVICE $IPV6_MTU
-fi
-
-# Apply local IPv6 address, if given (numbered tunnel)
-if [ -n "$IPV6ADDR" ]; then
-    ipv6_add_addr_on_device $DEVICE $IPV6ADDR
-fi
-
-# Setup additional IPv6 addresses from list, if given
-if [ -n "$IPV6ADDR_SECONDARIES" ]; then
-    for ipv6addr in $IPV6ADDR_SECONDARIES; do
-        ipv6_add_addr_on_device $DEVICE $ipv6addr
-    done
-fi
-
-# Setup default IPv6 route, check are done by function
-if [ -n "$IPV6_DEFAULTDEV" -o -n "$IPV6_DEFAULTGW" ]; then
-    ipv6_set_default_route "$IPV6_DEFAULTGW" "$IPV6_DEFAULTDEV" "$DEVICE"
-fi
-
-# Setup additional static IPv6 routes on specified interface, if given
-if [ -f /etc/sysconfig/static-routes-ipv6 ]; then
-    LC_ALL=C grep -w "^$DEVICE" /etc/sysconfig/static-routes-ipv6 | while read device ipv6route args; do
-    ipv6_add_route $ipv6route :: $DEVICE
-done
-fi
-
-# Setup static routes
-/etc/sysconfig/network-scripts/ifup-routes ${REALDEVICE}

sysconfig/network-scripts/ifup-tunnel

@@ -1,99 +0,0 @@
-#!/bin/bash
-# Copyright (C) 1996-2009 Red Hat, Inc. all rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License, version 2,
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# Thanks to:
-#  - Razvan Corneliu C.R. Vilt <razvan.vilt@linux360.ro>
-#  - Aaron Hope <aaron.hope@unh.edu>
-#  - Sean Millichamp <sean@enertronllc.com>
-# for providing the scripts this one is based on
-
-. /etc/init.d/functions
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-CONFIG=$1
-need_config "$CONFIG"
-source_config
-
-if [ "$PEER_OUTER_IPADDR" = "$PEER_INNER_IPADDR" ]; then
-    # Specifying PEER_INNER_IPADDR would automatically add a route to the peer
-    # through the tunnel, redirecting tunnel packets back to the tunnel and
-    # creating a dead loop.
-    unset PEER_INNER_IPADDR
-fi
-
-case "$TYPE" in
-GRE)
-    MODE=gre
-    proto=-4
-    /sbin/modprobe ip_gre
-    ;;
-GRE6)
-    MODE=ip6gre
-    proto=-6
-    /sbin/modprobe ip6_gre
-    ;;
-IPIP)
-    MODE=ipip
-    proto=-4
-    /sbin/modprobe ipip
-    ;;
-IPIP6|EXTERNAL)
-    MODE=ipip6
-    proto=-6
-    /sbin/modprobe ip6_tunnel
-    ;;
-*)
-    net_log $"Invalid tunnel type $TYPE"
-    exit 1
-    ;;
-esac
-
-# Generic tunnel devices are not supported here
-if [ "$DEVICE" = gre0 -o "$DEVICE" = tunl0 -o "$DEVICE" = ip6tnl0 ]; then
-    net_log $"Device '$DEVICE' isn't supported as a valid GRE device name."
-    exit 1
-fi
-
-# Create the tunnel
-# The outer addresses are those of the underlying (public) network.
-if [ "$TYPE" = 'EXTERNAL' ]; then
-  /sbin/ip link add "$DEVICE" type ip6tnl external
-else
-  /sbin/ip $proto tunnel add "$DEVICE" mode "$MODE" \
-      ${MY_OUTER_IPADDR:+local "$MY_OUTER_IPADDR"} \
-      ${PEER_OUTER_IPADDR:+remote "$PEER_OUTER_IPADDR"} \
-      ${KEY:+key "$KEY"} ${TTL:+ttl "$TTL"}
-fi
-
-if [ -n "$MTU" ]; then
-    /sbin/ip link set "$DEVICE" mtu "$MTU"
-fi
-
-# The inner address are used mainly for communication between a gateway
-# and a private network.  When the peer is configured with an inner address
-# contained in the peer's private network or identical to it's public address,
-# it need not be specified.
-/sbin/ip addr add "$MY_INNER_IPADDR" dev "$DEVICE" \
-    ${PEER_INNER_IPADDR:+peer "$PEER_INNER_IPADDR"}
-
-set_link_up "${DEVICE}"
-
-# IPv6 initialisation?
-/etc/sysconfig/network-scripts/ifup-ipv6 ${CONFIG}
-
-exec /etc/sysconfig/network-scripts/ifup-post "$CONFIG" "$2"

sysconfig/network-scripts/ifup-wireless

@@ -1,62 +0,0 @@
-#!/bin/bash
-# Network Interface Configuration System
-# Copyright (c) 1996-2009 Red Hat, Inc. all rights reserved.
-#
-# Based on PCMCIA wireless script by (David Hinds/Jean Tourrilhes)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License, version 2,
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# Configure wireless network device options.  See iw(8) for more info.
-# Valid variables:
-#    MODE: Ad-Hoc, Managed, etc.
-#    ESSID: Name of the wireless network
-#    FREQ: Frequency to operate on.  See CHANNEL
-#    KEY: Encryption key for WEP.
-
-# Only meant to be called from ifup.
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-IW=${IW:-iw}
-
-[ "$KEY" ] && KEYS="key d:0:$KEY"
-
-shopt -s nocasematch
-
-case "$MODE" in
-managed)
-    if [ "$ESSID" ]; then
-        $IW dev "$DEVICE" set type managed
-        $IW dev "$DEVICE" connect -w "$ESSID" $FREQ $KEYS
-    fi
-    ;;
-ad-hoc)
-    if [ -n "$ESSID" -a -n "$FREQ" ]; then
-        $IW dev "$DEVICE" set type ibss
-        $IW dev "$DEVICE" ibss join "$ESSID" "$FREQ" $KEYS
-    fi
-    ;;
-monitor)
-    if [ "$FREQ" ]; then 
-        $IW dev "$DEVICE" set type monitor
-        $IW dev "$DEVICE" set freq "$FREQ"
-    fi
-    ;;
-esac
-
-if [ -n "$WOWLAN" ] ; then
-    PHYDEVICE=$(phy_wireless_device $DEVICE)
-    iw phy $PHYDEVICE wowlan enable ${WOWLAN}
-fi

sysconfig/network-scripts/init.ipv6-global

@@ -1,164 +0,0 @@
-#!/bin/bash
-#
-# init.ipv6-global
-#
-#
-# Taken from: init.ipv6-global
-# (P) & (C) 2001-2005 by Peter Bieringer <pb@bieringer.de>
-#
-#  You will find more information on the initscripts-ipv6 homepage at
-#   http://www.deepspace6.net/projects/initscripts-ipv6.html
-#
-# RHL integration assistance by Pekka Savola <pekkas@netcore.fi>
-#
-# Version: 2005-01-04
-#
-# Calling parameters:
-#  $1: action (currently supported: start|stop|showsysctl)
-#  $2: position for start|stop (currently supported: pre|post)
-#
-# Called by hooks from /etc/[rc.d/]init.d/network
-#
-# Uses following information from /etc/sysconfig/network:
-#  IPV6FORWARDING=yes|no: controls global IPv6 forwarding (default: no)
-#  IPV6_AUTOCONF=yes|no: controls global automatic IPv6 configuration
-#   (default: yes if IPV6FORWARDING=no, no if IPV6FORWARDING=yes)
-#  IPV6_AUTOTUNNEL=yes|no: controls automatic IPv6 tunneling (default: no)
-#  IPV6_DEFAULTGW=<ipv6address[%interface]> [optional]
-#  IPV6_DEFAULTDEV=<interface> [optional]
-#
-
-. /etc/sysconfig/network
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-# Get action and hook position
-ACTION="$1"
-POSITION="$2"
-
-[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1
-. /etc/sysconfig/network-scripts/network-functions-ipv6
-
-# Initialize IPv6, depending on caller option
-case $ACTION in
-start)
-    case $POSITION in
-    pre)
-        # IPv6 test, module loaded, exit if system is not IPv6-ready
-        ipv6_test || exit 1
-
-        if [ "$IPV6FORWARDING" = "yes" ]; then
-            ipv6_global_forwarding=1
-            ipv6_global_auto=0
-        else
-            ipv6_global_forwarding=0
-            if [ "$IPV6_AUTOCONF" = "no" ]; then
-                ipv6_global_auto=0
-            else
-                ipv6_global_auto=1
-            fi
-        fi
-
-        if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then
-            # Reset IPv6 sysctl switches for "all", "default" and still existing devices
-            for i in /proc/sys/net/ipv6/conf/* ; do
-                interface=${i##*/}
-                sinterface=${interface/.//}
-                # Host/Router behaviour for the interface
-                /sbin/sysctl -e -w net.ipv6.conf.$sinterface.forwarding=$ipv6_global_forwarding >/dev/null 2>&1
-
-                # Autoconfiguration and redirect handling for Hosts
-                /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_ra=$ipv6_global_auto >/dev/null 2>&1
-                /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_redirects=$ipv6_global_auto >/dev/null 2>&1
-            done
-        fi
-        ;;
-
-    post)
-        # IPv6 test, module loaded, exit if system is not IPv6-ready
-        ipv6_test || exit 1
-
-        if [ "$IPV6_AUTOTUNNEL" = "yes" ]; then
-            ipv6_enable_autotunnel
-            # autotunnel interface doesn't require a MTU setup
-        fi
-
-        ## Add some routes which should never appear on the wire
-        # Unreachable IPv4-only addresses, normally blocked by source address selection
-        /sbin/ip route add unreach    ::ffff:0.0.0.0/96
-        # Unreachable IPv4-mapped addresses
-        /sbin/ip route add unreach    ::0.0.0.0/96
-        # Unreachable 6to4: IPv4 multicast, reserved, limited broadcast
-        /sbin/ip route add unreach    2002:e000::/19
-        # Unreachable 6to4: IPv4 loopback
-        /sbin/ip route add unreach    2002:7f00::/24
-        # Unreachable 6to4: IPv4 private (RFC 1918)
-        /sbin/ip route add unreach    2002:0a00::/24
-        /sbin/ip route add unreach    2002:ac10::/28
-        /sbin/ip route add unreach    2002:c0a8::/32
-        # Unreachable 6to4: IPv4 private (APIPA / DHCP link-local)
-        /sbin/ip route add unreach    2002:a9fe::/32
-        # Unreachable IPv6: 6bone test addresses
-        /sbin/ip route add unreach    3ffe:ffff::/32
-
-        # Set default route for autotunnel, if specified
-        if [ "$IPV6_DEFAULTDEV" = "sit0" -a "$IPV6_AUTOTUNNEL" = "yes" ]; then
-            if [ -n "$IPV6_DEFAULTGW" ]; then
-                ipv6_set_default_route $IPV6_DEFAULTGW $IPV6_DEFAULTDEV sit0
-            elif [ -n "$IPV6_DEFAULTDEV" ]; then
-                ipv6_set_default_route "" $IPV6_DEFAULTDEV sit0
-            fi
-        fi
-        ;;
-
-    *)
-        echo "Usage: $0 $1 {pre|post}"
-        ;;
-
-    esac
-    ;;
-
-stop)
-    case $POSITION in
-    pre)
-        ;;
-
-    post)
-        # IPv6 test, no module loaded, exit if system is not IPv6-ready
-        ipv6_test testonly || exit 0
-
-        if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then
-            for i in /proc/sys/net/ipv6/conf/* ; do
-                interface=${i##*/}
-                sinterface=${interface/.//}
-                # Assume Host behaviour
-                /sbin/sysctl -e -w net.ipv6.conf.$sinterface.forwarding=0 >/dev/null 2>&1
-
-                # Disable autoconfiguration and redirects
-                /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_ra=0 >/dev/null 2>&1
-                /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_redirects=0 >/dev/null 2>&1
-            done
-        fi
-
-        # Cleanup still existing tunnel devices
-        ipv6_cleanup_tunnel_devices
-
-        # Shut down generic tunnel interface now
-        if ipv6_test_device_status sit0 ; then
-            /sbin/ip link set sit0 down
-        fi
-        ;;
-
-    *)
-        echo "Usage: $0 $1 {pre|post}"
-        ;;
-
-    esac
-    ;;
-
-*)
-    echo $"Usage: $0 {start|stop|reload|restart|showsysctl}"
-    exit 1
-    ;;
-esac

sysconfig/network-scripts/network-functions

@@ -1,737 +0,0 @@
-# -*-Shell-script-*-
-#
-# This file is not a stand-alone shell script; it provides functions 
-# to network scripts that source it.
-
-# Set up a default search path.
-PATH="/sbin:/usr/sbin:/bin:/usr/bin"
-export PATH
-
-# We need to initialize the $HOSTNAME variable by ourselves now:
-# (It was previously done for RHEL-6 branch, but got lost in time.)
-HOSTNAME="$(hostname)"
-
-[ -z "$__sed_discard_ignored_files" ] && . /etc/init.d/functions
-
-get_hwaddr ()
-{
-    if [ -f /sys/class/net/${1}/address ]; then
-        tr '[a-z]' '[A-Z]' < /sys/class/net/${1}/address
-    elif [ -d "/sys/class/net/${1}" ]; then
-        LC_ALL= LANG= ip -o link show ${1} 2>/dev/null | \
-            awk '{ print toupper(gensub(/.*link\/[^ ]* ([[:alnum:]:]*).*/,
-                                        "\\1", 1)); }'
-    fi
-}
-
-get_config_by_device ()
-{
-    LANG=C grep -l "^[[:space:]]*DEVICE=['\"]\?${1}['\"]\?\([[:space:]#]\|$\)" \
-        /etc/sysconfig/network-scripts/ifcfg-* \
-        | LC_ALL=C sed -e "$__sed_discard_ignored_files"
-}
-
-get_config_by_hwaddr ()
-{
-    LANG=C grep -il "^[[:space:]]*HWADDR=['\"]\?${1}['\"]\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-* \
-        | LC_ALL=C sed -e "$__sed_discard_ignored_files"
-}
-
-get_config_by_subchannel ()
-{
-    LANG=C grep -E -i -l \
-        "^[[:space:]]*SUBCHANNELS=['\"]?([0-9]\.[0-9]\.[a-f0-9]+,){0,2}${1}(,[0-9]\.[0-9]\.[a-f0-9]+){0,2}['\"]?([[:space:]]+#|[[:space:]]*$)" \
-        /etc/sysconfig/network-scripts/ifcfg-* \
-        | LC_ALL=C sed -e "$__sed_discard_ignored_files"
-}
-
-get_config_by_name ()
-{
-    LANG=C grep -E -i -l "^[[:space:]]*NAME=\"(Auto |System )?${1}\"" \
-        /etc/sysconfig/network-scripts/ifcfg-* \
-        | LC_ALL=C sed -e "$__sed_discard_ignored_files"
-}
-
-get_device_by_hwaddr ()
-{
-    LANG=C ip -o link | awk -F ': ' -vIGNORECASE=1 '!/link\/ieee802\.11/ && /'"$1"'/ { print $2 }'
-}
-
-get_uuid_by_config ()
-{
-    dbus-send --system --print-reply --dest=com.redhat.ifcfgrh1 /com/redhat/ifcfgrh1 com.redhat.ifcfgrh1.GetIfcfgDetails string:"/etc/sysconfig/network-scripts/$1" 2>/dev/null | awk -F '"' '/string / { print $2 }'
-}
-
-generate_lease_file_name ()
-{
-    local ver=$1
-    LEASEFILE="/var/lib/dhclient/dhclient$ver-${DEVICE}.leases"
-    if [ -f $LEASEFILE ]; then
-         return
-    fi
-    LEASEFILE="/var/lib/dhclient/dhclient$ver-${UUID}-${DEVICE}.lease"
-}
-
-generate_config_file_name ()
-{
-    local ver=$1
-    if [ -s /etc/dhcp/dhclient$ver-${DEVICE}.conf ]; then
-        DHCLIENTCONF="-cf /etc/dhcp/dhclient$ver-${DEVICE}.conf";
-    elif [ -s /etc/dhclient$ver-${DEVICE}.conf ]; then
-        DHCLIENTCONF="-cf /etc/dhclient$ver-${DEVICE}.conf";
-    else
-        DHCLIENTCONF='';
-    fi
-}
-
-need_config ()
-{
-    local nconfig
-
-    CONFIG="ifcfg-${1}"
-    [ -f "${CONFIG}" ] && return
-    CONFIG="${1##*/}"
-    [ -f "${CONFIG}" ] && return
-    nconfig=$(get_config_by_name "${1}")
-    if [ -n "$nconfig" ] && [ -f "$nconfig" ]; then
-        CONFIG=${nconfig##*/}
-        return
-    fi
-    local addr=$(get_hwaddr ${1})
-    if [ -n "$addr" ]; then
-        nconfig=$(get_config_by_hwaddr ${addr})
-        if [ -n "$nconfig" ] ; then
-            CONFIG=${nconfig##*/}
-            [ -f "${CONFIG}" ] && return
-        fi
-    fi
-    nconfig=$(get_config_by_device ${1})
-    if [ -n "$nconfig" ] && [ -f "$nconfig" ]; then
-        CONFIG=${nconfig##*/}
-        return
-    fi
-}
-
-source_config ()
-{
-    CONFIG=${CONFIG##*/}
-    DEVNAME=${CONFIG##ifcfg-}
-    . /etc/sysconfig/network-scripts/$CONFIG
-    [ -r "keys-$DEVNAME" ] && . /etc/sysconfig/network-scripts/keys-$DEVNAME
-    case "$TYPE" in
-    Ethernet)
-        DEVICETYPE="eth"
-        ;;
-    CIPE)
-        DEVICETYPE="cipcb"
-        ;;
-    IPSEC)
-        DEVICETYPE="ipsec"
-        ;;
-    Modem)
-        DEVICETYPE="ppp"
-        ;;
-    xDSL)
-        DEVICETYPE="ppp"
-        ;;
-    ISDN)
-        DEVICETYPE="ippp"
-        ;;
-    Wireless)
-        DEVICETYPE="eth"
-        ;;
-    "Token Ring")
-        DEVICETYPE="eth"
-        ;;
-    CTC)
-        DEVICETYPE="ctc"
-        ;;
-    GRE | GRE6 | IPIP | IPIP6)
-        DEVICETYPE="tunnel"
-        ;;
-    SIT | sit)
-        DEVICETYPE="sit"
-        ;;
-    InfiniBand | infiniband)
-        DEVICETYPE="ib"
-        ;;
-    OVS*)
-        DEVICETYPE="ovs"
-        ;;
-    Bridge)
-        DEVICETYPE="eth"
-        ;;
-    esac
-    if [ -n "$HWADDR" ]; then
-        HWADDR=$(tr '[a-z]' '[A-Z]' <<<"$HWADDR")
-    fi
-    if [ -n "$MACADDR" ]; then
-        MACADDR=$(tr '[a-z]' '[A-Z]' <<<"$MACADDR")
-    fi
-    [ -z "$DEVICE" -a -n "$HWADDR" ] && DEVICE=$(get_device_by_hwaddr $HWADDR)
-    [ -z "$DEVICETYPE" ] && DEVICETYPE=$(echo ${DEVICE} | sed "s/[0-9]*$//")
-    [ -z "$REALDEVICE" -a -n "$PARENTDEVICE" ] && REALDEVICE=$PARENTDEVICE
-    [ -z "$REALDEVICE" ] && REALDEVICE=${DEVICE%%:*}
-    [ -z "$SYSCTLDEVICE" ] && SYSCTLDEVICE=${REALDEVICE/.//}
-    if [ "${DEVICE}" != "${REALDEVICE}" ]; then
-        ISALIAS=yes
-    else
-        ISALIAS=no
-    fi
-    if is_nm_running && [ "$REALDEVICE" != "lo" ] ; then
-        nm_con_load "$CONFIG"
-        if ! is_false $NM_CONTROLLED; then
-            UUID=$(get_uuid_by_config $CONFIG)
-            [ -n "$UUID" ] && _use_nm=true
-        fi
-    fi
-}
-
-nm_con_load () {
-    dbus-send --system --print-reply \
-        --dest=org.freedesktop.NetworkManager \
-        /org/freedesktop/NetworkManager/Settings \
-        org.freedesktop.NetworkManager.Settings.LoadConnections \
-        array:string:"/etc/sysconfig/network-scripts/${1}" >/dev/null 2>&1
-}
-
-ethtool_set()
-{
-    oldifs=$IFS;
-    IFS=';';
-    if [ -n "${ETHTOOL_DELAY}" ]; then
-      # Convert microseconds to seconds:
-      local ETHTOOL_DELAY_SEC=$(convert2sec ${ETHTOOL_DELAY} micro)
-      sleep ${ETHTOOL_DELAY_SEC}
-    fi
-    for opts in $ETHTOOL_OPTS ; do
-        IFS=$oldifs;
-        if [[ "${opts}" =~ [[:space:]]*- ]]; then
-            /sbin/ethtool $opts
-        else
-            /sbin/ethtool -s ${REALDEVICE} $opts
-        fi
-        IFS=';';
-    done
-    IFS=$oldifs;
-}
-
-expand_config ()
-{
-    local i=0 val
-    for idx in '' {0..255} ; do
-        ipaddr[$i]=$(eval echo '$'IPADDR$idx)
-        if [ -z "${ipaddr[$i]}" ]; then
-            [ "$idx" ] && [ $idx -ge 2 ] && break
-            continue
-        fi
-        prefix[$i]=$(eval echo '$'PREFIX$idx)
-        netmask[$i]=$(eval echo '$'NETMASK$idx)
-        broadcast[$i]=$(eval echo '$'BROADCAST$idx)
-        arpcheck[$i]=$(eval echo '$'ARPCHECK$idx)
-        arpupdate[$i]=$(eval echo '$'ARPUPDATE$idx)
-
-        if [ "${prefix[$i]}x" != "x" ]; then
-            val=$(/bin/ipcalc --netmask "${ipaddr[$i]}/${prefix[$i]}")
-            netmask[$i]=${val##NETMASK=}
-        fi
-
-        if [ "${netmask[$i]}x" = "x" ]; then
-            val=$(/bin/ipcalc --netmask "${ipaddr[$i]}")
-            netmask[$i]=${val##NETMASK=}
-        fi
-
-        if [ "${prefix[$i]}x" = "x" ]; then
-            val=$(/bin/ipcalc --prefix ${ipaddr[$i]} ${netmask[$i]})
-            prefix[$i]=${val##PREFIX=}
-        fi
-
-        if [ "${broadcast[$i]}x" = "x" ]; then
-            val=$(/bin/ipcalc --broadcast ${ipaddr[$i]} ${netmask[$i]})
-            broadcast[$i]=${val##BROADCAST=}
-        fi
-
-        if [ "${arpcheck[$i]}x" != "x" ]; then
-            arpcheck[$i]=${arpcheck[$i]##ARPCHECK=}
-            arpcheck[$i]=${arpcheck[$i],,*}
-        fi
-
-        if [ "${arpupdate[$i]}x" != "x" ]; then
-            arpupdate[$i]=${arpupdate[$i]##ARPUPDATE=}
-            arpupdate[$i]=${arpupdate[$i],,*}
-        fi
-
-        i=$((i+1))
-    done
-
-    [ -n "$DHCP_HOSTNAME" ] && DHCP_HOSTNAME=${DHCP_HOSTNAME%%.*}
-
-    if [ -z "${NETWORK}" ]; then
-        eval $(/bin/ipcalc --network ${ipaddr[0]} ${netmask[0]})
-    fi
-}
-
-toggle_value ()
-{
-    if [ "$2" = "yes"    -o "$2" = "YES" ] ; then
-        echo "$1 on"
-    elif [ "$2" = "no"    -o "$2" = "NO" ] ; then
-        echo "$1 off"
-    else
-        echo ''
-    fi
-}
-
-is_nm_running ()
-{
-    dbus-send --system --print-reply \
-        --dest=org.freedesktop.DBus \
-        /org/freedesktop/DBus \
-        org.freedesktop.DBus.GetNameOwner \
-        string:"org.freedesktop.NetworkManager" >/dev/null 2>&1
-}
-
-is_nm_active ()
-{
-    LANG=C nmcli -t --fields device,state dev status 2>/dev/null | grep -q "^${1}:connected$"
-}
-
-is_nm_handling ()
-{
-    LANG=C nmcli -t --fields device,state dev status 2>/dev/null | grep -q "^\(${1}:connected\)\|\(${1}:connecting.*\)$"
-}
-
-is_nm_device_unmanaged ()
-{
-    LANG=C nmcli -t --fields GENERAL dev show "${1}" 2>/dev/null | awk -F ':' '/GENERAL.STATE/ { if ($2 == "unmanaged") exit 0 ; else exit 1; }'
-}
-
-# Sets $alias to the device module if $? != 0
-is_available ()
-{
-    [ -z "$1" ] && return 1
-
-    [ -d "/sys/class/net/$1" ] && return 0
-
-    [ -n "$BONDING_OPTS" ] && install_bonding_driver $1
-
-    alias=$(modprobe -c | awk \
-        'BEGIN { alias = ""; }
-        $1 == "alias" && $2 == "'"$1"'" { alias = $3; }
-        $1 == "install" { install[$2] = $3; }
-        END {
-            cmd = install[alias];
-            print alias;
-            if (alias == "" || alias == "off" || cmd == "/bin/true" || cmd == ":")
-                exit 1;
-            exit 0;
-        }
-    ')
-    [ $? -eq 0 ] || return 2
-
-    modprobe $1 > /dev/null 2>&1 || {
-        return 1
-    }
-    if [ -n "$HWADDR" ]; then
-        local curdev=$(get_device_by_hwaddr "$HWADDR")
-        if [ -z "$curdev" ]; then
-            return 1
-        fi
-    fi
-
-    if [ ${alias} = "bonding" ]; then
-        install_bonding_driver $1
-    fi
-
-    [ -d "/sys/class/net/$1" ] && return 0 || return 1
-}
-
-is_available_wait ()
-{
-    [ -z "$1" ] && return 1
-
-    local retry=${2##*[!0-9]*}
-
-    is_available $1 && return 0
-    ret=$?
-
-    while [ 0"$retry" -gt 0 ]; do
-        sleep 1
-        [ -d "/sys/class/net/$1" ] && return 0
-        retry=$(($retry -1))
-    done
-
-    return $ret
-}
-
-is_hostname_set ()
-{
-    case "${HOSTNAME}" in
-        '(none)' | 'localhost' | 'localhost.localdomain')
-            # Hostname NOT set:
-            return 1
-            ;;
-        *)
-            # Hostname IS set:
-            return 0
-            ;;
-    esac
-}
-
-need_hostname ()
-{
-    # Should we avoid obtaining hostname from DHCP? (user override)
-    is_true "${NO_DHCP_HOSTNAME}" && return 1
-
-    if is_hostname_set; then
-        # Hostname is already set, we do not need to acquire it:
-        return 1
-    else
-        # Hostname is NOT set, we need to acquire it:
-        return 0
-    fi
-}
-
-set_hostname_options ()
-{
-    # User explicitly requires to *not* send DHCP_HOSTNAME, DHCP_FQDN or HOSTNAME:
-    is_false "${DHCP_SEND_HOSTNAME}" && return
-
-    if [[ -n "${DHCP_HOSTNAME}" && -n "${DHCP_FQDN}" ]]; then
-        net_log $"Both 'DHCP_HOSTNAME=${DHCP_HOSTNAME}' and 'DHCP_FQDN=${DHCP_FQDN}' are configured... Using DHCP_FQDN." warning
-    fi
-
-    local hostname_options=''
-
-    # DHCP_FQDN takes precedence before DHCP_HOSTNAME -- as it does in NetworkManager,
-    # and DHCP_HOSTNAME takes precedence before HOSTNAME:
-    if [[ -n "${DHCP_FQDN}" ]]; then
-        hostname_options="-F ${DHCP_FQDN}"
-    elif [[ -n "${DHCP_HOSTNAME}" ]]; then
-        hostname_options="-H ${DHCP_HOSTNAME}"
-    elif is_hostname_set; then
-        # We need to truncate the hostname in case it is the FQDN:
-        hostname_options="-H ${HOSTNAME%%.*}"
-    else
-        # Nothing to send to the DHCP server:
-        # ['(none)', 'localhost' or 'localhost.localdomain' are not valid]
-        return
-    fi
-
-    # Append the hostname options to the content of passed variable name:
-    eval "$1='${!1} ${hostname_options}'"
-
-    return
-}
-
-set_hostname ()
-{
-    hostname $1
-    if ! grep search /etc/resolv.conf >/dev/null 2>&1; then
-        domain=$(echo $1 | sed 's/^[^\.]*\.//')
-        if [ -n "$domain" ]; then
-            rsctmp=$(mktemp /tmp/XXXXXX);
-            cat /etc/resolv.conf > $rsctmp
-            echo "search $domain" >> $rsctmp
-
-            # Backup resolv.conf only if it doesn't exist already:
-            ! [ -f /etc/resolv.conf.save ] && cp -af /etc/resolv.conf /etc/resolv.conf.save
-
-            change_resolv_conf $rsctmp
-            /bin/rm -f $rsctmp
-        fi    
-    fi
-}
-
-check_device_down ()
-{
-    [ ! -d /sys/class/net/$1 ] && return 0
-    if LC_ALL=C ip -o link show dev $1 2>/dev/null | grep -q ",UP" ; then
-        return 1
-    else
-        return 0
-    fi
-}
-
-set_link_up ()
-{
-    if [ "$LINKSTATUS" != down ]; then
-        ip link set dev $1 up >/dev/null 2>&1
-    fi
-}
-
-check_link_down ()
-{
-    if ! LC_ALL=C ip link show dev $1 2>/dev/null| grep -q ",UP" ; then
-        set_link_up $1
-    fi
-
-    timeout=0
-    delay=10
-    [ -n "$LINKDELAY" ] && delay=$(($LINKDELAY * 2))
-    while [ $timeout -le $delay ]; do
-        [ "$(cat /sys/class/net/$REALDEVICE/carrier 2>/dev/null)" != "0" ] && return 1
-        sleep 0.5
-        timeout=$((timeout+1))
-    done
-    return 0
-}
-
-check_default_route ()
-{
-    LC_ALL=C ip route list match 0.0.0.0/0 | grep -q default
-}
-
-find_gateway_dev ()
-{
-    . /etc/sysconfig/network
-    if [ -n "${GATEWAY}" -a "${GATEWAY}" != "none" ] ; then
-        dev=$(LC_ALL=C /sbin/ip route get to "${GATEWAY}" 2>/dev/null | \
-        sed -n 's/.* dev \([[:alnum:]]*\) .*/\1/p')
-        if [ -n "$dev" ]; then
-            GATEWAYDEV="$dev"
-        fi
-    fi
-}
-
-# After the device $1 goes away, restore the standard default route; typically
-# used for ppp with DEFROUTE temporarily replacing the "standard" default
-# route.
-# FIXME: This function doesn't support some newer features (GATEWAY in ifcfg,
-# $WINDOW, $METRIC)
-add_default_route ()
-{
-    . /etc/sysconfig/network
-    check_default_route && return 0
-    find_gateway_dev
-    if [ "$GATEWAYDEV" != "" -a -n "${GATEWAY}" -a \
-             "${GATEWAY}" != "none" ]; then
-        if ! check_device_down $1; then
-            if [ "$GATEWAY" = "0.0.0.0" ]; then
-                /sbin/ip route add default dev ${GATEWAYDEV}
-            else
-                /sbin/ip route add default via ${GATEWAY}
-            fi
-        fi
-    elif [ -f /etc/default-routes ]; then
-        while read spec; do
-            /sbin/ip route add $spec
-        done < /etc/default-routes
-        rm -f /etc/default-routes
-    fi
-}
-
-is_wireless_device ()
-{
-    [ -x /usr/sbin/iw ] || return 1
-    LC_ALL=C /usr/sbin/iw dev $1 info > /dev/null 2>&1 && return 0
-    return 1
-}
-
-phy_wireless_device ()
-{
-    cat /sys/class/net/$1/phy80211/name
-}
-
-bond_master_exists ()
-{
-    local bond_name
-    [ -z "${1}" ] && return 1
-    [ ! -f /sys/class/net/bonding_masters ] && return 1
-
-    for bond_name in $(< /sys/class/net/bonding_masters); do
-        [ "${bond_name}" == "${1}" ] && return 0
-    done
-    return 1
-}
-
-install_bonding_driver ()
-{
-    local fn="install_bonding_driver"
-
-    if ! bond_master_exists ${1}; then
-        modprobe bonding || return 1
-        echo "+$1" > /sys/class/net/bonding_masters 2>/dev/null
-    fi
-    (
-        # Set config here
-        need_config "$1"
-        source_config
-        if [ -f /sys/class/net/${DEVICE}/bonding/slaves ] && [ $(wc -l < /sys/class/net/${DEVICE}/bonding/slaves) -eq 0 ]; then
-            /sbin/ip link set dev ${DEVICE} down
-
-            # parse options and put them to arrays
-            for arg in $BONDING_OPTS ; do
-                bopts_keys[${#bopts_keys[*]}]=${arg%%=*}
-                bopts_vals[${#bopts_vals[*]}]=${arg##*=}
-            done
-
-            # add the bits to setup driver parameters here
-            # first set mode, miimon
-            for (( idx=0; idx < ${#bopts_keys[*]}; idx++ )) ; do
-                key=${bopts_keys[$idx]}
-                value=${bopts_vals[$idx]}
-
-                if [ "${key}" = "mode" ] ; then
-                    echo "${value}" > /sys/class/net/${DEVICE}/bonding/$key || {
-                        net_log $"Failed to set value '$value' [mode] to ${DEVICE} bonding device" err $fn
-                    }
-                    bopts_keys[$idx]=""
-                fi
-                if [ "${key}" = "miimon" ] ; then
-                    echo "${value}" > /sys/class/net/${DEVICE}/bonding/$key || {
-                        net_log $"Failed to set value '$value' [miimon] to ${DEVICE} bonding device" err $fn
-                    }
-                    bopts_keys[$idx]=""
-                fi
-            done
-
-            # set all other remaining options
-            for (( idx=0; idx < ${#bopts_keys[*]}; idx++ )) ; do
-                key=${bopts_keys[$idx]}
-                value=${bopts_vals[$idx]}
-
-                # option already set; take next
-                [[ -z "$key" ]] && continue
-
-                if [ "${key}" = "arp_ip_target" -a "${value:0:1}" != "+" ]; then
-                    OLDIFS=$IFS;
-                    IFS=',';
-                    for arp_ip in $value; do
-                        if ! grep -q $arp_ip /sys/class/net/${DEVICE}/bonding/$key; then
-                            echo +$arp_ip > /sys/class/net/${DEVICE}/bonding/$key || {
-                                net_log $"Failed to set '$arp_ip' value [arp_ip_target] to ${DEVICE} bonding device" err $fn
-                            }
-                        fi
-                    done
-                    IFS=$OLDIFS;
-                elif [ "${key}" = "arp_ip_target" ]; then
-                    if ! grep -q ${value#+} /sys/class/net/${DEVICE}/bonding/$key; then
-                        echo "$value" > /sys/class/net/${DEVICE}/bonding/$key || {
-                            net_log $"Failed to set '$value' value [arp_ip_target] to ${DEVICE} bonding device" err $fn
-                        }
-                    fi
-                elif [ "${key}" != "primary" ]; then
-                    echo $value > /sys/class/net/${DEVICE}/bonding/$key || {
-                        net_log $"Failed to set '$value' value [$key] to ${DEVICE} bonding device" err $fn
-                    }
-                fi
-            done
-        fi
-    )
-    return 0
-}
-
-is_bonding_device ()
-{
-    [ -f "/sys/class/net/$1/bonding/slaves" ]
-}
-
-# Invoke this when /etc/resolv.conf has changed:
-change_resolv_conf ()
-{
-    s=$(/bin/grep '^[\ \       ]*option' /etc/resolv.conf 2>/dev/null)
-    if [ $# -gt 1 ]; then
-        if [ "x$s" != "x" ]; then
-            s="$s"$'\n'
-        fi
-        n_args=$#
-        while [ $n_args -gt 0 ]; do 
-            case "$s" in
-            *$1*)
-                shift
-                n_args=$(($n_args-1))
-                continue
-                ;;
-            esac
-            s="$s$1"
-            shift
-            if [ $# -gt 0 ]; then
-                s="$s"$'\n'
-            fi
-            n_args=$(($n_args-1))
-        done             
-    elif [ $# -eq 1 ]; then
-        if [ "x$s" != "x" ]; then
-            s="$s"$'\n'$(/bin/grep -vF "$s" $1)
-        else
-            s=$(cat $1)
-        fi
-    fi
-    (echo "$s" > /etc/resolv.conf) >/dev/null 2>&1;
-    r=$?
-    if [ $r -eq 0 ]; then
-        [ -x /sbin/restorecon ] && /sbin/restorecon /etc/resolv.conf >/dev/null 2>&1 # reset the correct context
-        /usr/bin/logger -p local7.notice -t "NET" -i "$0 : updated /etc/resolv.conf"
-        [ -e /run/nscd/socket ] && /usr/sbin/nscd -i hosts # invalidate cache
-    fi
-    return $r
-}
-
-# Logging function
-#
-# Usage: net_log <message> <err|warning|info> <optional file/function name>
-#
-# Default level is 'err'.
-
-net_log()
-{
-    local message="$1"
-    local level="$2"
-    local name="$3"
-
-    [ -z "$message" ] && return 1
-    [ -z "$level" ] && level=err
-    [ -z "$name" ] && name=$0
-
-    case $level in
-    'debug')
-        local txt_level=$"DEBUG     "
-        ;;
-    'err')
-        local txt_level=$"ERROR     "
-        ;;
-    'warning')
-        local txt_level=$"WARN      "
-        ;;
-    'info')
-        local txt_level=$"INFO      "
-        ;;
-    esac
-
-    echo "$txt_level: [$name] $message"
-
-    if [ -x /usr/bin/logger ]; then
-        /usr/bin/logger -p daemon.$level -t "$name" "$message"
-    fi
-    return 0
-}
-
-update_DNS_entries()
-{
-    # Remove duplicate values from DNS options if any:
-    if [ -n "${DNS3}" ] && [[ "${DNS3}" == "${DNS2}" || "${DNS3}" == "${DNS1}" ]]; then
-        unset DNS3
-    fi
-
-    if [ -n "${DNS2}" ] && [[ "${DNS2}" == "${DNS1}" ]]; then
-        unset DNS2
-    fi
-
-    # Shift the DNS options if necessary:
-    if [ -z "${DNS1}" ] && [ -n "${DNS2}" ]; then
-        DNS1="${DNS2}"
-        unset DNS2
-    fi
-
-    if [ -z "${DNS2}" ] && [ -n "${DNS3}" ]; then
-        DNS2="${DNS3}"
-        unset DNS3
-    fi
-
-    # We need to check DNS1 again in case only DNS3 was set at all:
-    if [ -z "${DNS1}" ] && [ -n "${DNS2}" ]; then
-        DNS1="${DNS2}"
-        unset DNS2
-    fi
-}

systemd/system/multi-user.target.wants/one-context-local.service

@@ -1 +0,0 @@
-/usr/lib/systemd/system/one-context-local.service

systemd/system/multi-user.target.wants/one-context.service

@@ -1 +0,0 @@
-/usr/lib/systemd/system/one-context.service

systemd/system/multi-user.target.wants/vmtoolsd.service

@@ -1 +0,0 @@
-/usr/lib/systemd/system/vmtoolsd.service

systemd/system/vmtoolsd.service.requires/vgauthd.service

@@ -1 +0,0 @@
-/usr/lib/systemd/system/vgauthd.service

vmware-tools/poweroff-vm-default

@@ -1,134 +0,0 @@
-#!/bin/sh
-##########################################################
-# Copyright (C) 2010-2016 VMware, Inc. All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published
-# by the Free Software Foundation version 2.1 and no later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE.  See the Lesser GNU General Public
-# License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA.
-#
-##########################################################
-
-##########################################################################
-# DO NOT modify this file directly as it will be overwritten the next
-# time the VMware Tools are installed.
-##########################################################################
-
-#
-# statechange.sh
-#
-# This script is a refactored version of the legacy power scripts (e.g.,
-# poweron-vm-default).  It expects to be installed in their places --
-# in other words, `basename "$0"` might be poweron-vm-default.
-#
-# Handy reference/shorthand used in this doc/scripts:
-#    TOOLS_CONFDIR ::= Depends on platform and installation settings.  Likely
-#                      "/etc/vmware-tools" or
-#                      "/Library/Application Support/VMware Tools"
-#    powerOp       ::= One of "poweron-vm", "poweroff-vm", "suspend-vm", and
-#                      "resume-vm".
-#    vmwScriptDir  ::= $TOOLS_CONFDIR/scripts/vmware
-#    userScriptDir ::= $TOOLS_CONFDIR/scripts/${powerOp}-default.d
-#
-# End users may install scripts of their own under $userScriptDir.  They
-# are executed in alphabetical order with "$powerOp" as the only argument.
-#
-# NB:  This directory layout remains to preserve backwards compatibility. End
-# users are free to write a single script which uses its only parameter
-# (${powerOp}) as a discriminator, and then install symlinks to it in each
-# of the ${powerOp}-default.d directories.
-#
-# On power-on and resume, VMware's scripts execute before the end user's.  On
-# suspend and power-off, the end user's execute before VMware's.  (This way,
-# VMware stops services only after the user's scripts have finished their
-# work, and conversely restores the same services before the user's scripts
-# attempt to use them.)
-#
-# Should any script exit non-zero, only its value will be saved to exitCode.
-# (Any further non-zero exits will have no effect on exitCode.)  This script
-# exits with $exitCode.
-#
-# XXX Consider using the available/enabled pattern for VMware's scripts.
-#
-# XXX This should be staged as a single executable whereby the desired
-# power operation is passed in as a parameter.  (I.e., one would run
-# "/path/to/statechange.sh suspend-vm" rather than having to install
-# statechange.sh as suspend-vm-default.)
-#
-
-echo `date` ": Executing '$0'"
-
-# See above.
-TOOLS_CONFDIR=`dirname "$0"`
-export TOOLS_CONFDIR
-
-# Pull in subroutines like Panic.
-. "$TOOLS_CONFDIR"/statechange.subr
-
-
-#
-# RunScripts --
-#
-#    Executes scripts installed under $scriptDir.
-#
-# Side effects:
-#    exitCode may be incremented.
-#
-
-RunScripts() {
-   scriptDir="$1"
-
-   if [ -d "$scriptDir" ]; then
-      for scriptFile in "$scriptDir"/*; do
-         if [ -x "$scriptFile" ]; then
-            "$scriptFile" $powerOp
-            exitCode=`expr $exitCode \| $?`
-         fi
-      done
-   fi
-}
-
-
-#
-# main --
-#
-#    Entry point.  See comments at top of file for details.
-#
-# Results:
-#    Exits with $exitCode.
-#
-
-main() {
-   # This is sanity checked in the case/esac bit below.
-   powerOp=`basename "$0" | sed 's,-default,,'`
-   exitCode=0
-
-   vmwScriptDir="$TOOLS_CONFDIR/scripts/vmware"
-   userScriptDir="$TOOLS_CONFDIR/scripts/${powerOp}-default.d"
-
-   case "$powerOp" in
-      poweron-vm|resume-vm)
-         RunScripts "$vmwScriptDir"
-         RunScripts "$userScriptDir"
-         ;;
-      poweroff-vm|suspend-vm)
-         RunScripts "$userScriptDir"
-         RunScripts "$vmwScriptDir"
-         ;;
-      *)
-         Panic "Invalid argument: $powerOp"
-         ;;
-   esac
-
-   return $exitCode
-}
-
-main

vmware-tools/poweron-vm-default

@@ -1,134 +0,0 @@
-#!/bin/sh
-##########################################################
-# Copyright (C) 2010-2016 VMware, Inc. All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published
-# by the Free Software Foundation version 2.1 and no later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE.  See the Lesser GNU General Public
-# License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA.
-#
-##########################################################
-
-##########################################################################
-# DO NOT modify this file directly as it will be overwritten the next
-# time the VMware Tools are installed.
-##########################################################################
-
-#
-# statechange.sh
-#
-# This script is a refactored version of the legacy power scripts (e.g.,
-# poweron-vm-default).  It expects to be installed in their places --
-# in other words, `basename "$0"` might be poweron-vm-default.
-#
-# Handy reference/shorthand used in this doc/scripts:
-#    TOOLS_CONFDIR ::= Depends on platform and installation settings.  Likely
-#                      "/etc/vmware-tools" or
-#                      "/Library/Application Support/VMware Tools"
-#    powerOp       ::= One of "poweron-vm", "poweroff-vm", "suspend-vm", and
-#                      "resume-vm".
-#    vmwScriptDir  ::= $TOOLS_CONFDIR/scripts/vmware
-#    userScriptDir ::= $TOOLS_CONFDIR/scripts/${powerOp}-default.d
-#
-# End users may install scripts of their own under $userScriptDir.  They
-# are executed in alphabetical order with "$powerOp" as the only argument.
-#
-# NB:  This directory layout remains to preserve backwards compatibility. End
-# users are free to write a single script which uses its only parameter
-# (${powerOp}) as a discriminator, and then install symlinks to it in each
-# of the ${powerOp}-default.d directories.
-#
-# On power-on and resume, VMware's scripts execute before the end user's.  On
-# suspend and power-off, the end user's execute before VMware's.  (This way,
-# VMware stops services only after the user's scripts have finished their
-# work, and conversely restores the same services before the user's scripts
-# attempt to use them.)
-#
-# Should any script exit non-zero, only its value will be saved to exitCode.
-# (Any further non-zero exits will have no effect on exitCode.)  This script
-# exits with $exitCode.
-#
-# XXX Consider using the available/enabled pattern for VMware's scripts.
-#
-# XXX This should be staged as a single executable whereby the desired
-# power operation is passed in as a parameter.  (I.e., one would run
-# "/path/to/statechange.sh suspend-vm" rather than having to install
-# statechange.sh as suspend-vm-default.)
-#
-
-echo `date` ": Executing '$0'"
-
-# See above.
-TOOLS_CONFDIR=`dirname "$0"`
-export TOOLS_CONFDIR
-
-# Pull in subroutines like Panic.
-. "$TOOLS_CONFDIR"/statechange.subr
-
-
-#
-# RunScripts --
-#
-#    Executes scripts installed under $scriptDir.
-#
-# Side effects:
-#    exitCode may be incremented.
-#
-
-RunScripts() {
-   scriptDir="$1"
-
-   if [ -d "$scriptDir" ]; then
-      for scriptFile in "$scriptDir"/*; do
-         if [ -x "$scriptFile" ]; then
-            "$scriptFile" $powerOp
-            exitCode=`expr $exitCode \| $?`
-         fi
-      done
-   fi
-}
-
-
-#
-# main --
-#
-#    Entry point.  See comments at top of file for details.
-#
-# Results:
-#    Exits with $exitCode.
-#
-
-main() {
-   # This is sanity checked in the case/esac bit below.
-   powerOp=`basename "$0" | sed 's,-default,,'`
-   exitCode=0
-
-   vmwScriptDir="$TOOLS_CONFDIR/scripts/vmware"
-   userScriptDir="$TOOLS_CONFDIR/scripts/${powerOp}-default.d"
-
-   case "$powerOp" in
-      poweron-vm|resume-vm)
-         RunScripts "$vmwScriptDir"
-         RunScripts "$userScriptDir"
-         ;;
-      poweroff-vm|suspend-vm)
-         RunScripts "$userScriptDir"
-         RunScripts "$vmwScriptDir"
-         ;;
-      *)
-         Panic "Invalid argument: $powerOp"
-         ;;
-   esac
-
-   return $exitCode
-}
-
-main

vmware-tools/resume-vm-default

@@ -1,134 +0,0 @@
-#!/bin/sh
-##########################################################
-# Copyright (C) 2010-2016 VMware, Inc. All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published
-# by the Free Software Foundation version 2.1 and no later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE.  See the Lesser GNU General Public
-# License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA.
-#
-##########################################################
-
-##########################################################################
-# DO NOT modify this file directly as it will be overwritten the next
-# time the VMware Tools are installed.
-##########################################################################
-
-#
-# statechange.sh
-#
-# This script is a refactored version of the legacy power scripts (e.g.,
-# poweron-vm-default).  It expects to be installed in their places --
-# in other words, `basename "$0"` might be poweron-vm-default.
-#
-# Handy reference/shorthand used in this doc/scripts:
-#    TOOLS_CONFDIR ::= Depends on platform and installation settings.  Likely
-#                      "/etc/vmware-tools" or
-#                      "/Library/Application Support/VMware Tools"
-#    powerOp       ::= One of "poweron-vm", "poweroff-vm", "suspend-vm", and
-#                      "resume-vm".
-#    vmwScriptDir  ::= $TOOLS_CONFDIR/scripts/vmware
-#    userScriptDir ::= $TOOLS_CONFDIR/scripts/${powerOp}-default.d
-#
-# End users may install scripts of their own under $userScriptDir.  They
-# are executed in alphabetical order with "$powerOp" as the only argument.
-#
-# NB:  This directory layout remains to preserve backwards compatibility. End
-# users are free to write a single script which uses its only parameter
-# (${powerOp}) as a discriminator, and then install symlinks to it in each
-# of the ${powerOp}-default.d directories.
-#
-# On power-on and resume, VMware's scripts execute before the end user's.  On
-# suspend and power-off, the end user's execute before VMware's.  (This way,
-# VMware stops services only after the user's scripts have finished their
-# work, and conversely restores the same services before the user's scripts
-# attempt to use them.)
-#
-# Should any script exit non-zero, only its value will be saved to exitCode.
-# (Any further non-zero exits will have no effect on exitCode.)  This script
-# exits with $exitCode.
-#
-# XXX Consider using the available/enabled pattern for VMware's scripts.
-#
-# XXX This should be staged as a single executable whereby the desired
-# power operation is passed in as a parameter.  (I.e., one would run
-# "/path/to/statechange.sh suspend-vm" rather than having to install
-# statechange.sh as suspend-vm-default.)
-#
-
-echo `date` ": Executing '$0'"
-
-# See above.
-TOOLS_CONFDIR=`dirname "$0"`
-export TOOLS_CONFDIR
-
-# Pull in subroutines like Panic.
-. "$TOOLS_CONFDIR"/statechange.subr
-
-
-#
-# RunScripts --
-#
-#    Executes scripts installed under $scriptDir.
-#
-# Side effects:
-#    exitCode may be incremented.
-#
-
-RunScripts() {
-   scriptDir="$1"
-
-   if [ -d "$scriptDir" ]; then
-      for scriptFile in "$scriptDir"/*; do
-         if [ -x "$scriptFile" ]; then
-            "$scriptFile" $powerOp
-            exitCode=`expr $exitCode \| $?`
-         fi
-      done
-   fi
-}
-
-
-#
-# main --
-#
-#    Entry point.  See comments at top of file for details.
-#
-# Results:
-#    Exits with $exitCode.
-#
-
-main() {
-   # This is sanity checked in the case/esac bit below.
-   powerOp=`basename "$0" | sed 's,-default,,'`
-   exitCode=0
-
-   vmwScriptDir="$TOOLS_CONFDIR/scripts/vmware"
-   userScriptDir="$TOOLS_CONFDIR/scripts/${powerOp}-default.d"
-
-   case "$powerOp" in
-      poweron-vm|resume-vm)
-         RunScripts "$vmwScriptDir"
-         RunScripts "$userScriptDir"
-         ;;
-      poweroff-vm|suspend-vm)
-         RunScripts "$userScriptDir"
-         RunScripts "$vmwScriptDir"
-         ;;
-      *)
-         Panic "Invalid argument: $powerOp"
-         ;;
-   esac
-
-   return $exitCode
-}
-
-main

vmware-tools/scripts/vmware/network

@@ -1,696 +0,0 @@
-#!/bin/sh -x
-##########################################################
-# Copyright (C) 2001-2018, 2021 VMware, Inc. All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published
-# by the Free Software Foundation version 2.1 and no later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE.  See the Lesser GNU General Public
-# License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA.
-#
-##########################################################
-
-
-#
-# network (Linux)
-#
-# Using a combination of a system networking script, ifconfig, ifup, ifdown
-# and the ip command, attempt to release and renew DHCP leases upon receipt
-# of suspend and resume events, respectively.
-#
-
-SOURCE=$0
-logdir=/var/log
-logbase=$logdir/vmware-network
-logfile=$logbase.log
-
-# Defines logging mode enabled (1) or disabled (0)
-logmode=1
-
-# Defines whether to rotate logs (1) or not (0)
-logrotate=1
-
-#
-# Get log file path
-#
-get_logfile() {
-   file=`vmware-toolbox-cmd config get logging network.data | \
-        sed -e 's/.*= *//' -e 's/ *$//'`
-   if [ -n "${file##*"UNSET"*}" ]; then
-      logfile=$file
-      logdir=`dirname $logfile`
-      logbase=`echo $logfile | sed 's/\..*$//'`
-   fi
-}
-
-#
-# Get Network logging config
-#
-get_logconfig() {
-   handler=`vmware-toolbox-cmd config get logging network.handler | \
-           sed -e 's/.*= *//' -e 's/ *$//'`
-   case $handler in
-      "file")
-         get_logfile
-         ;;
-      "file+")
-         get_logfile
-         logrotate=0
-         ;;
-      "vmx"|"std")
-         logrotate=0
-         ;;
-      "syslog")
-         logfile=/var/log/syslog
-         logdir=`dirname $logfile`
-         logrotate=0
-         ;;
-      *)
-         ;;
-   esac
-}
-
-#
-# Rotate any logs
-#
-rotate_logfile() {
-   if [ $logrotate -eq 1 ]; then
-      max=`vmware-toolbox-cmd config get logging network.maxOldLogFiles | \
-          sed -e 's/.*= *//' -e 's/ *$//'`
-      if [ -z "${max##*"UNSET"*}" -o `expr "$max" : '[0-9]\+$'` -eq 0 ]; then
-         max=9
-      fi
-      max=`expr $max - 1`
-      for s in `seq $max -1 1`; do
-         d=`expr $s + 1`
-         mv -f $logbase.$s.log $logbase.$d.log
-      done
-      mv -f $logbase.log $logbase.1.log
-   fi
-}
-
-#
-# Logging api
-#
-log() {
-   if [ $logmode -eq 1 ]; then
-      if [ "$handler" = "vmx" ]; then
-         `vmtoolsd --cmd "log $*"`
-      elif [ "$handler" = "std" ]; then
-         echo `date` ": $*"
-      elif [ -w $logdir ]; then
-         space=`df -k $logdir | awk 'NR == 2 { print $4 }'`
-         if [ $space -gt 1024 ]; then
-            echo `date` ": $*" >> $logfile
-         else
-            `vmtoolsd --cmd "log WARNING: [$SOURCE] Logging disabled. No space left in $logdir"`
-            logmode=0
-         fi
-      else
-         `vmtoolsd --cmd "log WARNING: [$SOURCE] Logging disabled. $logdir is not writable"`
-         logmode=0
-      fi
-   fi
-}
-
-get_logconfig
-rotate_logfile
-
-log "Executing '$0 $*'"
-
-. `dirname "$0"`/../../statechange.subr
-
-
-#
-# find_networking_script --
-#
-#    Searches common Linux distro init/rc paths to find a singular network
-#    services script.
-#
-# Result:
-#    Returns a valid networking script path on success or "error" on failure.
-#
-# Side effects:
-#    None.
-#
-
-find_networking_script() {
-   local script="error"
-   for dir in "/etc/init.d" "/sbin/init.d" "/etc" "/etc/rc.d" ; do
-      if [ -d "$dir/rc0.d" ] &&
-         [ -d "$dir/rc1.d" ] &&
-         [ -d "$dir/rc2.d" ] &&
-         [ -d "$dir/rc3.d" ] &&
-         [ -d "$dir/rc4.d" ] &&
-         [ -d "$dir/rc5.d" ] &&
-         [ -d "$dir/rc6.d" ]; then
-
-         # Now find the appropriate networking script.
-         if [ -d "$dir/init.d" ]; then
-            if [ -x "$dir/init.d/network" ]; then
-               script="$dir/init.d/network"
-            elif [ -x "$dir/init.d/networking" ]; then
-               script="$dir/init.d/networking"
-            fi
-         else
-            if [ -x "$dir/network" ]; then
-               script="$dir/network"
-            elif [ -x "$dir/networking" ]; then
-               script="$dir/networking"
-            fi
-         fi
-      fi
-   done
-
-   log "$script"
-}
-
-
-#
-# exec_networking_script --
-#
-#    Execute the networking script to bring network interfaces up or down
-#    based on the given input action argument.
-#
-
-exec_networking_script()
-{
-   local script=$1
-   local action=$2
-
-   # Using SysV "service" if it exists, otherwise fall back to run the
-   # script directly
-   service=`which service 2>/dev/null`
-   if [ $? = 0 -a -n "$service" ]; then
-      serviceName=`basename "$script"`
-      "$service" "$serviceName" "$action"
-   else
-      "$script" "$action"
-   fi
-
-   return $?
-}
-
-
-#
-# exec_systemctl_service --
-#
-#    Handle linux distributions that use systemd to replace the legacy
-#    system V startup scripts. The previous network script searching
-#    approach is no longer viable in these systems. Invoke the systemctl
-#    command to control the network service instead.
-#
-
-exec_systemctl_service()
-{
-   local rc=1
-   local action=$1
-   local ctlcmd=$(which systemctl 2>/dev/null)
-   local service
-
-   [ -z "$ctlcmd" ] && return $rc
-
-   for svc in systemd-networkd network; do
-      if ! $ctlcmd status $svc | grep -iq 'not-found'; then
-         service=$svc && break
-      fi
-   done
-
-   [ -z "$service" ] && return $rc
-
-   $ctlcmd $action $service; rc=$?
-
-   # When use the systemd-networkd service to shut down interfaces, interface
-   # address and state remain unchanged. Need to use ip command to change its
-   # address and state.
-   if [ $rc = 0 -a $service = 'systemd-networkd' -a $action = 'stop' ]; then
-      config_network_intfs $action; rc=$?
-   fi
-
-   return $rc
-}
-
-
-#
-# del_intf_ip --
-#
-#    Use the ip command to remove all the addresses of an interface.
-#
-
-del_intf_ip()
-{
-   local nic=$1
-
-   $ip_cmd addr flush dev $nic
-   return $?
-}
-
-
-#
-# ip_intf_ops --
-#
-#    Use the ip command to change the state of an interface to up or down.
-#
-
-ip_intf_ops()
-{
-   local rc=1
-   local nic=$1
-   local ops=$2
-
-   [ -z "$ip_cmd" ] && return $rc
-
-   $ip_cmd link set $nic $ops; rc=$?
-
-   # Remove interface addresses when taking an interface down.
-   if [ $rc = 0 -a $ops = down ]; then
-      del_intf_ip $nic; rc=$?
-   fi
-
-   return $rc
-}
-
-
-#
-# intf_ops --
-#
-#    Execute the specified command (ifup or ifdown) if available, otherwise use
-#    the ip command as fallback. If ifup or ifdown fails, run the ip command to
-#    retry the intended operation.
-#
-
-intf_ops()
-{
-   local rc=0
-   local cmd=$1
-   local ops=$2
-   local nic=$3
-   local tmp
-
-   if [ ! -z "$cmd" ]; then
-      tmp=$($cmd $nic 2>&1); rc=$?
-
-      # Some systems still return a successful status even the command fails
-      # because the interface is not configured in the configuration file. So
-      # have to examine the command output to determine the actual status.
-      if [ $rc = 0 ]; then
-         echo $tmp | egrep -iq 'not configured|ignoring unknown' && rc=1
-      fi
-   fi
-
-   # If ifup/ifdown fails, try the ip fallback.
-   if [ -z "$cmd" -o $rc != 0 ]; then
-      ip_intf_ops $nic $ops; rc=$?
-   fi
-
-   return $rc
-}
-
-
-#
-# exec_intf_ops --
-#
-#    Perform an operation to bring an individual interface up or down.
-#
-
-exec_intf_ops()
-{
-   local rc=0
-   local action=$1
-   local nic=$2
-
-   case $action in
-      start)
-         intf_ops "$ifup_cmd" up $nic; rc=$?
-         ;;
-      stop)
-         intf_ops "$ifdown_cmd" down $nic; rc=$?
-         ;;
-      *)
-         Panic "Illegal interface action: $action"
-         ;;
-   esac
-
-   return $rc
-}
-
-
-#
-# config_network_intfs --
-#
-#    For Linux systems not supporting networking scripts to bring interfaces
-#    up or down, provide a way to change the interface state individually.
-#
-
-config_network_intfs()
-{
-   local rc=0
-   local action=$1
-
-   if [ -f "$activeList" ]; then
-
-      while read nic; do
-         exec_intf_ops $action $nic
-         rc=$(expr $rc \| $?)
-      done < $activeList
-   fi
-
-   return $rc
-}
-
-
-#
-# run_network_script --
-#
-#    Finds out how to run the system's script used to control networking, and
-#    runs it with the given argument (which should be one of the usual SysV
-#    init script arguments). If it does not work, tries the other alternatives.
-#    So far, our alternatives are (a) systemctl (b) network script (c) perform
-#    an individual interface state change.
-#
-
-run_network_script()
-{
-   local action=$1
-   local rc=0
-   local script
-
-   while true; do
-
-      exec_systemctl_service $action
-      [ $? != 0 ] || break
-
-      script=`find_networking_script`
-
-      if [ $script != "error" ]; then
-         exec_networking_script $script $action
-         [ $? != 0 ] || break
-      fi
-
-      # Since all the other alternatives fail, need to manually change
-      # individual interface state.
-      config_network_intfs $action; rc=$?
-      break
-   done
-
-   return $rc
-}
-
-
-#
-# save_active_NIC_list --
-#
-#    Records a list of every active NIC to /var/run/vmware-active-nics.
-#
-#    XXX What's the story on aliases?  Should they still be included, or will
-#    they be recreated automatically upon resume?
-#
-# Results:
-#    $activeList has, one per line, a list of all active NICs.
-#
-# Side effects:
-#    None.
-#
-
-save_active_NIC_list()
-{
-   local intf_out
-
-   >$activeList
-
-   # Find out all the non-loopback up interfaces. Use ip if available
-   # otherwise fall back to the ifconfig command.
-   # ifconfig is buggy on some platforms and truncates long
-   # network names
-   if [ -n "$ip_cmd" ]; then
-      for nic in $($ip_cmd link show up | egrep '\bUP\b' | awk -F: '{print $2}'); do
-         $ip_cmd link show ${nic%@*} | grep -iq 'link/ether' && echo ${nic%@*} >> $activeList
-      done
-   else
-      for nic in $($ifconfig_cmd | sed -n 's/^\([^: \t]*\).*$/\1/p'); do
-         intf_out=$($ifconfig_cmd $nic)
-         echo $intf_out | grep -iq loopback && continue
-         echo $intf_out | egrep -q '\bUP\b' && echo $nic >> $activeList
-      done
-   fi
-}
-
-
-#
-# rescue_NIC --
-#
-#    For each NIC recorded in $activeList that is not currently "up", run
-#    "ifup $nic" or "ip link set $nic up" to bring the interface up.
-#
-# Results:
-#    All downed NICs should be active.
-#
-
-rescue_NIC()
-{
-   local rc=0
-   local intf_out
-
-   if [ -f "$activeList" ]; then
-      while read nic; do
-         if [ -n "$ip_cmd" ]; then
-            intf_out=$($ip_cmd link show $nic up)
-         else
-            intf_out=$($ifconfig_cmd $nic)
-         fi
-
-         if echo $intf_out | grep -q 'UP'; then
-            log "[rescue_nic] $nic is already active."
-         else
-            log "[rescue_nic] activating $nic ..."
-
-            # Our best effort to activate interfaces, use ifup if available
-            # otherwise use the ip command as fallback.
-            intf_ops "$ifup_cmd" up $nic
-            rc=$(expr $rc \| $?)
-         fi
-      done < $activeList
-
-      rm -f $activeList
-   fi
-
-   return $rc
-}
-
-
-#
-# TranquilizeNetworkManager --
-#
-#    Put the NetworkManager daemon to sleep (maybe).
-#
-#    See http://projects.gnome.org/NetworkManager/developers/spec.html .
-#
-# Results:
-#    Sleep(true) request is sent to the NetworkManager D-Bus interface.
-#
-# Side effects:
-#    None.
-#
-
-TranquilizeNetworkManager()
-{
-   # `which' may be a bit noisy, so we'll shush it.
-   dbusSend=`which dbus-send 2>/dev/null`
-   rc=$?
-   if [ $rc -ne 0 ]; then
-      return $rc
-   fi
-
-   # Check NetworkManager state before disabling it.
-   nm_state=`$dbusSend --system --print-reply		\
-             --dest=org.freedesktop.NetworkManager	\
-             /org/freedesktop/NetworkManager		\
-             org.freedesktop.DBus.Properties.Get	\
-             string:'org.freedesktop.NetworkManager'	\
-             string:'State'				\
-             | awk '/variant/ {print $3;}'`
-   if [ -z "$nm_state" ]; then
-      return 1
-   fi
-   # NetworkManager API     0.7/0.8   0.9
-   # NM_STATE_ASLEEP           1      10
-   # NM_STATE_DISCONNECTED     4      20
-   case $nm_state in
-      1|4|10|20)
-         # Nothing needs to be done.
-         return 0
-         ;;
-   esac
-
-   # NetworkManager 0.8.0 and above
-   $dbusSend --system --print-reply          \
-      --dest=org.freedesktop.NetworkManager  \
-      /org/freedesktop/NetworkManager        \
-      org.freedesktop.NetworkManager.Enable boolean:false
-   rc=$?
-   if [ $rc -eq 0 ]; then
-      return $rc
-   fi
-   # NetworkManager 0.7.0
-   $dbusSend --system --print-reply          \
-      --dest=org.freedesktop.NetworkManager  \
-      /org/freedesktop/NetworkManager        \
-      org.freedesktop.NetworkManager.Sleep boolean:true
-   rc=$?
-   if [ $rc -eq 0 ]; then
-      return $rc
-   fi
-   # NetworkManager 0.6
-   $dbusSend --system --print-reply          \
-      --dest=org.freedesktop.NetworkManager  \
-      /org/freedesktop/NetworkManager        \
-      org.freedesktop.NetworkManager.sleep
-   rc=$?
-
-   return $rc
-}
-
-
-#
-# WakeNetworkManager --
-#
-#    Wake the NetworkManager daemon (maybe).
-#
-#    See http://projects.gnome.org/NetworkManager/developers/spec.html .
-#
-# Results:
-#    Sleep(false)request is sent to the NetworkManager D-Bus interface.
-#
-# Side effects:
-#    None.
-#
-
-WakeNetworkManager()
-{
-   # `which' may be a bit noisy, so we'll shush it.
-   dbusSend=`which dbus-send 2>/dev/null`
-   rc=$?
-   if [ $rc = 0 ]; then
-      # NetworkManager 0.8.0
-      $dbusSend --system --print-reply          \
-         --dest=org.freedesktop.NetworkManager  \
-         /org/freedesktop/NetworkManager        \
-         org.freedesktop.NetworkManager.Enable boolean:true
-      rc=$?
-      if [ $rc = 0 ]; then
-         return $rc
-      fi
-      # NetworkManager 0.7.0
-      $dbusSend --system --print-reply          \
-         --dest=org.freedesktop.NetworkManager  \
-         /org/freedesktop/NetworkManager        \
-         org.freedesktop.NetworkManager.Sleep boolean:false
-      rc=$?
-      if [ $rc = 0 ]; then
-         return $rc
-      fi
-      # NetworkManager 0.6
-      $dbusSend --system --print-reply          \
-         --dest=org.freedesktop.NetworkManager  \
-         /org/freedesktop/NetworkManager        \
-         org.freedesktop.NetworkManager.wake
-      rc=$?
-   fi
-   return $rc
-}
-
-
-#
-# sanity_check --
-#
-#    Check if the script has all the commands it needs to carry out the
-#    request. So far, it requires either ip or ifconfig command to read
-#    interface configuration. Ifup is not checked here. It is checked at
-#    the place where we need to do individual interface state change.
-#
-
-sanity_check()
-{
-   ip_cmd=$(which ip 2>/dev/null)
-   ifconfig_cmd=$(which ifconfig 2>/dev/null)
-   ifup_cmd=$(which ifup 2>/dev/null)
-   ifdown_cmd=$(which ifdown 2>/dev/null)
-
-   [ -z "$ifconfig_cmd" -a -z "$ip_cmd" ] && \
-       Panic "ip and ifconfig not in search path."
-}
-
-
-#
-# main --
-#
-#    Main entry point.  Perform some sanity checking, then map state change
-#    events to relevant networking operations.
-#
-# Results:
-#    See comment at top of file.
-#
-
-main() {
-   exitCode=0
-   activeList=/var/run/vmware-active-nics
-
-   case "$1" in
-      poweron-vm)
-         rm -f $activeList
-         ;;
-      suspend-vm)
-         TranquilizeNetworkManager
-         exitCode=$?
-         if [ $exitCode != 0 ]; then
-            sanity_check suspend-vm
-            save_active_NIC_list
-            run_network_script stop
-            exitCode=$?
-         fi
-         ;;
-      resume-vm)
-         WakeNetworkManager
-         exitCode=$?
-         if [ $exitCode != 0 ]; then
-            sanity_check resume-vm
-            # According to hfu, "/etc/init.d/networking restart" on Debian 5.0
-            # may bring down ethernet interfaces tagged as "allow-hotplug" without
-            # bringing them back up.
-            #
-            # This is especially a problem when reverting to a live, running
-            # VM snapshot where an active NIC list hadn't yet been generated,
-            # resulting in sudden loss of an otherwise operational NIC.
-            #
-            # So, if the active list doesn't exist, assume we're coming back to
-            # a live snapshot and capture the current active list now for
-            # rescue later.
-            if [ ! -s $activeList ]; then
-               save_active_NIC_list
-            fi
-
-            # We shall use start not restart here. Otherwise we may not be able
-            # to bring back active list on distros like sles11sp2
-            # -- PR 816791
-            run_network_script start
-            rescue_NIC
-            exitCode=$?
-         fi
-         ;;
-      *)
-         log "No argument supplied."
-         ;;
-   esac
-
-   return $exitCode
-}
-
-main "$@"
-log "Finished '$0 $*'"

vmware-tools/statechange.subr

@@ -1,47 +0,0 @@
-#!/bin/sh
-##########################################################
-# Copyright (C) 2010-2016 VMware, Inc. All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published
-# by the Free Software Foundation version 2.1 and no later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE.  See the Lesser GNU General Public
-# License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA.
-#
-##########################################################
-
-##########################################################################
-# DO NOT modify this file directly as it will be overwritten the next
-# time the VMware Tools are installed.
-##########################################################################
-
-
-#
-# Panic --
-#
-#    Write a formatted error message to stderr and exit.
-#
-# Results:
-#    Stderr is spammed, program exits with exit code 1.
-#
-# Side effects:
-#    None.
-#
-
-Panic() {
-   fmt="`date '+%b %d %H:%M:%S'` `basename \"$0\"`"
-   if [ -n "$1" ]; then
-      fmt="${fmt}: $1"
-      shift
-   fi
-
-   printf >&2 "${fmt}\n" "$@"
-   exit 1
-}

vmware-tools/suspend-vm-default

@@ -1,134 +0,0 @@
-#!/bin/sh
-##########################################################
-# Copyright (C) 2010-2016 VMware, Inc. All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published
-# by the Free Software Foundation version 2.1 and no later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE.  See the Lesser GNU General Public
-# License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA.
-#
-##########################################################
-
-##########################################################################
-# DO NOT modify this file directly as it will be overwritten the next
-# time the VMware Tools are installed.
-##########################################################################
-
-#
-# statechange.sh
-#
-# This script is a refactored version of the legacy power scripts (e.g.,
-# poweron-vm-default).  It expects to be installed in their places --
-# in other words, `basename "$0"` might be poweron-vm-default.
-#
-# Handy reference/shorthand used in this doc/scripts:
-#    TOOLS_CONFDIR ::= Depends on platform and installation settings.  Likely
-#                      "/etc/vmware-tools" or
-#                      "/Library/Application Support/VMware Tools"
-#    powerOp       ::= One of "poweron-vm", "poweroff-vm", "suspend-vm", and
-#                      "resume-vm".
-#    vmwScriptDir  ::= $TOOLS_CONFDIR/scripts/vmware
-#    userScriptDir ::= $TOOLS_CONFDIR/scripts/${powerOp}-default.d
-#
-# End users may install scripts of their own under $userScriptDir.  They
-# are executed in alphabetical order with "$powerOp" as the only argument.
-#
-# NB:  This directory layout remains to preserve backwards compatibility. End
-# users are free to write a single script which uses its only parameter
-# (${powerOp}) as a discriminator, and then install symlinks to it in each
-# of the ${powerOp}-default.d directories.
-#
-# On power-on and resume, VMware's scripts execute before the end user's.  On
-# suspend and power-off, the end user's execute before VMware's.  (This way,
-# VMware stops services only after the user's scripts have finished their
-# work, and conversely restores the same services before the user's scripts
-# attempt to use them.)
-#
-# Should any script exit non-zero, only its value will be saved to exitCode.
-# (Any further non-zero exits will have no effect on exitCode.)  This script
-# exits with $exitCode.
-#
-# XXX Consider using the available/enabled pattern for VMware's scripts.
-#
-# XXX This should be staged as a single executable whereby the desired
-# power operation is passed in as a parameter.  (I.e., one would run
-# "/path/to/statechange.sh suspend-vm" rather than having to install
-# statechange.sh as suspend-vm-default.)
-#
-
-echo `date` ": Executing '$0'"
-
-# See above.
-TOOLS_CONFDIR=`dirname "$0"`
-export TOOLS_CONFDIR
-
-# Pull in subroutines like Panic.
-. "$TOOLS_CONFDIR"/statechange.subr
-
-
-#
-# RunScripts --
-#
-#    Executes scripts installed under $scriptDir.
-#
-# Side effects:
-#    exitCode may be incremented.
-#
-
-RunScripts() {
-   scriptDir="$1"
-
-   if [ -d "$scriptDir" ]; then
-      for scriptFile in "$scriptDir"/*; do
-         if [ -x "$scriptFile" ]; then
-            "$scriptFile" $powerOp
-            exitCode=`expr $exitCode \| $?`
-         fi
-      done
-   fi
-}
-
-
-#
-# main --
-#
-#    Entry point.  See comments at top of file for details.
-#
-# Results:
-#    Exits with $exitCode.
-#
-
-main() {
-   # This is sanity checked in the case/esac bit below.
-   powerOp=`basename "$0" | sed 's,-default,,'`
-   exitCode=0
-
-   vmwScriptDir="$TOOLS_CONFDIR/scripts/vmware"
-   userScriptDir="$TOOLS_CONFDIR/scripts/${powerOp}-default.d"
-
-   case "$powerOp" in
-      poweron-vm|resume-vm)
-         RunScripts "$vmwScriptDir"
-         RunScripts "$userScriptDir"
-         ;;
-      poweroff-vm|suspend-vm)
-         RunScripts "$userScriptDir"
-         RunScripts "$vmwScriptDir"
-         ;;
-      *)
-         Panic "Invalid argument: $powerOp"
-         ;;
-   esac
-
-   return $exitCode
-}
-
-main

vmware-tools/tools.conf.example

@@ -1,510 +0,0 @@
-# Copyright (c) 2019-2022 VMware, Inc.  All rights reserved.
-
-# "CAUTION: tools.conf is highly syntax sensitive file. Use extreme caution
-# while editing it. If modified, it is automatically re-loaded by
-# VMware Tools services every 5 seconds."
-#
-# Lines must not end with trailing white space.
-
-[unsetenvironment]
-# Defines environment variables to be removed from the service reading
-# the configuration file. Supported formats are:
-#
-# 1. <variableName>=
-# 2. <serviceName>.<variableName>=
-#
-# Where <serviceName> refers to the 'vmsvc' and 'vmusr',
-# <variableName> refers to the name of the environment
-# variable to be removed. '=' sign after <variableName>
-# is mandatory to maintain the configuration file syntax.
-# However, anything after '=' is ignored.
-#
-# Case-sensitive behavior is defined by the operating system.
-#
-# Note: unsetenvironment group is processed before setenvironment group.
-# As the service environment is setup at start up time, any changes
-# in this group require service to be restarted in order to take effect.
-#
-# Unsetting PATH for all services:
-# PATH=
-#
-# Unsetting PATH for vmsvc only:
-# vmsvc.PATH=
-#
-# Unsetting PATH for vmusr only:
-# vmusr.PATH=
-
-[setenvironment]
-# Defines environment variables to be set for the service reading
-# the configuration file. Supported formats are:
-#
-# 1. <variableName>=<variableValue>
-# 2. <serviceName>.<variableName>=<variableValue>
-#
-# Where <serviceName> refers to the 'vmsvc' and 'vmusr',
-# <variableName> refers to the name of the environment
-# variable to be set, and <variableValue> refers to the
-# value to be assigned to the environment variable.
-#
-# Case-sensitive behavior is defined by the operating system.
-#
-# Note: setenvironment group is processed after unsetenvironment group.
-# As the service environment is setup at start up time, any changes
-# in this group require service to be restarted in order to take effect.
-#
-# Setting TMPDIR for all services:
-# TMPDIR=/vmware/temp
-#
-# Setting TMPDIR for vmsvc only:
-# vmsvc.TMPDIR=/vmware/vmsvc/temp
-#
-# Setting TMPDIR for vmusr only:
-# vmusr.TMPDIR=/vmware/vmusr/temp
-
-[logging]
-# set to false to disable logging
-#log = true
-
-# Log destinations for various services
-# By default, logs go to
-# %windir%/temp/vmware-<servicename>.log
-# for Windows, and
-# /var/log/vmware-<servicename>-<username>.log
-# for Linux, MacOS and Solaris.
-
-# Possible values for handler are:
-# file: logs to a file. Set *.data to the file name
-# file+: same as 'file', but appends to the file
-#  All file paths used in *.data value need to be in Unix
-#  format (forward slashes) and in utf-8, for all operating
-#  systems.
-# vmx: logs to the host (ESXi, Workstation, Fusion)
-# std: Logs to stdout for level >= 'message',
-# and to stderr for more severe than 'message'.
-# syslog: logs to syslog
-# outputdebugstring: uses OutputDebugString (Windows only)
-
-# If handler is 'syslog' and the OS is Linux, the facility
-# can be set with <domain>.facility. The facility value can be one of
-# 'local0'..'local7', 'daemon' or 'user'. The default is 'user'.
-#vmtoolsd.facility = user
-
-# possible values for level are:
-# debug, info, message, warning, critical, error
-# Note that "debug" level logs generate huge amounts of logs and may also
-# include sensitive data required for diagnosis. Therefore, this level should
-# be used only for the duration of diagnosis of an issue and reverted back to
-# default setting post diagnosis.
-
-# Enable tools service logging to a file.
-#vmtoolsd.level = debug
-#vmtoolsd.handler = file
-#vmtoolsd.data = c:/tmp/vmtoolsd-${USER}.log
-
-# Enable 'vmsvc' service logging to a file.
-#vmsvc.level = debug
-#vmsvc.handler = file
-#vmsvc.data = c:/tmp/vmsvc.log
-
-# Enable VMwareResolutionSet.exe logging to a file.
-# Comment this for Linux guest, sometimes vmusr logs are not generated due
-# to this being uncommented
-#vmresset.level = debug
-#vmresset.handler = file+
-#vmresset.data = c:/tmp/vmresset.log
-
-# Enable new "vmusr" service logging to a file.
-#vmusr.level = debug
-#vmusr.handler = file
-#vmusr.data = c:/tmp/vmusr.${USER}.log
-
-# Set the following configuration if you want to collect the logs for
-# vmware-toolbox-cmd utility
-#toolboxcmd.level = debug
-#toolboxcmd.handler = file
-#toolboxcmd.data = c:/tmp/vmtoolboxcmd-${USER}.log
-
-# With no explicit logging configuration for deployPkg, its default log path in
-# Linux is /var/log/vmware-imc/toolsDeployPkg.log, and in Windows is
-# %WINDIR%/Temp/vmware-imc/toolsDeployPkg.log
-# Set the following configuration if you want to redirect the deployPkg log to
-# any existing location other than the default.
-#deployPkg.level = debug
-#deployPkg.handler = file
-#deployPkg.data = c:/tmp/toolsDeployPkg-${USER}.log
-
-# Redirecting the deployPkg log to the vmx log file. Please note that
-# "log = true" and the vmsvc log handler setting to vmx are also neccessary
-# if you want to redirect the deployPkg log to vmx.
-#log = true
-#vmsvc.level = debug
-#vmsvc.handler = vmx
-#deployPkg.level = debug
-#deployPkg.handler = vmx
-
-# Enable old VMwareUser/vmware-user logging to file.
-#log.file = c:/tmp/vmtools.log
-
-# Enable "hgfsServer" request handling logging to the appropriate service file.
-#hgfsServer.level = debug
-
-# Enable  "hgfs" manager and transport logging to the appropriate service file.
-#hgfsd.level = debug
-
-#vmbackup.level = debug
-#vmbackup.handler = vmx
-
-#vmvss.level = debug
-#vmvss.handler = vmx
-
-# Default 4096, 0=> disable log caching
-#maxCacheEntries=4096
-
-
-# Set the following configurations for modifying network script logging file.
-# Only for Linux, Mac OS X, Solaris, and FreeBSD
-#network.handler = file
-#network.data = /tmp/network.log
-#network.maxOldLogFiles = 9
-
-# Redirect network script logs to vmx
-#network.handler = vmx
-
-[powerops]
-# Custom scripts for power operations
-# This can be an absolute path, or a path relative to the tools
-# install path (/etc/vmware-tools/ for Linux).
-# For more information on configuring and querying custom scripts with
-# VMware Tools, see the "Use Custom VMware Tools Scripts" section of the
-# "VMware Tools Configuration Utility User's Guide".
-
-# Runs when the virtual machine is being powered on rather than resumed.
-# Also runs after virtual machine restarts.
-# The default script has no effect on networking for the virtual machine.
-#poweron-script=poweron-vm-default
-
-# Runs when the virtual machine is being powered off or reset.
-# The default script has no effect on networking for the virtual machine.
-#poweroff-script=poweroff-vm-default
-
-# Runs when the virtual machine is resumed after it was suspended.
-# On Windows guest operating systems, if the virtual machine is configured to
-# use DHCP, the default script renews the IP address of the virtual machine.
-# On Linux, Mac OS X, Solaris, and FreeBSD guest operating systems,
-# this script starts networking for the virtual machine.
-#resume-script=resume-vm-default
-
-# Runs when the virtual machine is being suspended.
-# On Windows guest operating systems, if the virtual machine is configured
-# to use DHCP, the default script releases the IP address of the virtual
-# machine.
-# On Linux, Mac OS X, Solaris, and FreeBSD, this script stops networking for
-# the virtual machine.
-#suspend-script=suspend-vm-default
-
-[guestinfo]
-
-# Set to true to disable the perf monitor.
-#disable-perf-mon=false
-
-# Set to true to disable DiskInfo.
-#disable-query-diskinfo=false
-
-# User-defined poll interval in seconds. Set to 0 to disable polling.
-#poll-interval=30
-
-# User-defined stats interval in seconds. Set to 0 to disable stats collection.
-#stats-interval=20
-
-# Whether stat results should be written to the log.
-#enable-stat-logging=false
-
-# Set a comma separated list of network interface names that can be the
-# primary ones. These will be sorted to the top. Interface names can use
-# wildcards like '*' and '?'. Default is no value.
-#primary-nics=
-
-# Set a comma separated list of network interface names that have low priority
-# (so they will be sorted to the end). Interface names can use wildcards like
-# '*' and '?'. Default is no value.
-#low-priority-nics=
-
-# Set a comma separated list of network interface names that shall be ignored.
-# Interface names can use wildcards like '*' and '?'.
-# Default for Linux and all non-Windows:
-#exclude-nics=veth*,docker*,virbr*
-# Default for Windows:
-#exclude-nics=vEthernet*
-
-# max umber of IPv4 routes to gather.
-#max-ipv4-routes=100
-
-# max umber of IPv6 routes to gather.
-#max-ipv6-routes=100
-
-# whether to include reserved space in diskInfo space metrics on Linux
-#diskinfo-include-reserved=false
-
-[globalconf]
-
-# The GlobalConf feature provides an ability for the vSphere administrators
-# to distribute a 'VMware Tools Configuration File' (tools.conf) via the
-# GuestStore for multiple VMs at scale.
-
-# Defines the configuration to enable/disable the GlobalConf module.
-# Set to true to enable the module.
-# Set to false to disable the module. Default false.
-#enabled=false
-
-# Defines a custom GlobalConf poll interval (in seconds).
-# Default 3600 seconds. Minimum 1800 seconds.
-#poll-interval=3600
-
-# Defines the global configuration resource in GuestStore.
-# Windows guests
-#resource=/vmware/configurations/vmtools/windows/tools.conf
-#
-# Linux guests
-#resource=/vmware/configurations/vmtools/linux/tools.conf
-
-[componentmgr]
-
-# This plugin manages the known and enabled components add/remove status.
-# The plugin polls at regular interval and triggers action add/remove for
-# all the known and enabled components in the componentMgr plugin.
-
-# Default and minimum polling interval in seconds (0 => polling disabled)
-#poll-interval=180
-
-# Comma separated list of components managed by the plugin. If not specified,
-# default value is all, which means all components are enabled by default.
-# A special value of none means no component, which is equivalent to disabling
-# the plugin completely. Value is parsed left to right and parsing stops at
-# first occurrence of all or none or end of line.
-#included=all
-
-[appinfo]
-
-# This plugin collects info about running applications in guest OS.
-
-# Set to true to disable the appinfo plugin.
-#disabled=false
-
-# User-defined poll interval in seconds. Set to 0 to disable the plugin.
-#poll-interval=21600
-
-# For Windows guest, set to true to use WMI for getting the application
-# version info, otherwise native Win32 API is used.
-#useWMI=false
-
-# Whether to remove the duplicate applications information in the
-# guestinfo variable.
-#remove-duplicates=true
-
-[containerinfo]
-
-# This plugin collects info about running containers in guest OS.
-
-# User-defined poll interval in seconds. Set to 0 to disable the plugin.
-#poll-interval=21600
-
-# Maximum number of containers to be retrieved per namespace.
-#max-containers=256
-
-# Whether to remove the duplicate containers information in the
-# guestinfo variable.
-#remove-duplicates=true
-
-# Unix socket to use to communicate with the docker daemon.
-#docker-unix-socket=/var/run/docker.sock
-
-# The unix socket to connect to communicate with containerd grpc server
-# for retrieving the list of running containers.
-#containerd-unix-socket=/run/containerd/containerd.sock
-
-# List of namespaces to be queried for the running containers.
-# The value for this key is a comman separated list.
-#allowed-namespaces=moby,k8s.io,default
-
-[servicediscovery]
-
-# This plugin provides admins with additional info for better VM management.
-
-# Set to true to disable the servicediscovery plugin.
-#disabled=false
-
-[unity]
-#
-# Unity is available for Windows only.
-#
-
-# Set to true to override system decisions about whether unity should be available.
-#forceEnable=false
-
-# Override the desktop background color when in Unity mode.
-#desktop.backgroundColor=
-
-# The socket type can be 'ipsocket' or 'vsocket':
-#pbrpc.socketType
-
-[resolutionKMS]
-
-# Default is true if tools finds an xf86-video-vmware driver with
-# version >= 13.2.0. If you don't have X installed, set this to true manually.
-# This only affects tools for Linux.
-#enable=true
-
-[guestosinfo]
-
-# Override the short OS name sent by tools.
-#short-name=
-
-# Override the long OS name sent by tools.
-#long-name=
-
-[vmbackup]
-
-# enableSyncDriver is Linux only.
-#enableSyncDriver=true
-
-# enableVSS is Windows only.
-#enableVSS=true
-
-# vss.disableAppQuiescing is Windows only.
-# This setting can be used to force file system quiescing on Windows systems
-# having problems with application quiescing.
-# See https://kb.vmware.com/s/article/2146204
-#vss.disableAppQuiescing=false
-
-# Linux:
-# The value of excludedFileSystems is a comma-separated list of glob-style
-# patterns specifying the file system mount points to be excluded from
-# quiescing operation. The patterns may use '*' (wildcard) to represent
-# any string of characters and '?' (joker) to represent any single character.
-# The characters represented by the patterns '*' and '?' may include any
-# characters, including '/'.
-#
-# Windows:
-# The value of excludedFileSystems is a comma-separated list of mount points
-# specifying the volumes to be excluded from quiesced snapshots.
-# Each mount point must be a full path separated and ended with "\\".
-# For example, to exclude volumes with drive letter 'E' or mount point
-# "F:\mount\", use:
-# excludedFileSystems=E:\\,F:\\mount\\
-# This setting is ignored when application quiescing is used.
-
-#excludedFileSystems=
-
-# execScripts specifies whether to execute scripts as part of the quiescing
-# operation. Scripts are executed from the scripts directory along with the
-# legacy scripts.
-#
-# Scripts directory:
-# Linux: /etc/vmware-tools/backupScripts.d
-# Windows: <Install-Path>\backupScripts.d
-#
-# Legacy scripts:
-# Linux: /usr/sbin/pre-freeze-script and /usr/sbin/post-thaw-script
-# Windows: C:\windows\pre-freeze-script.bat and C:\windows\post-thaw-script.bat
-#
-# On each quiescing operation, scripts are invoked before quiescing and
-# either after a quiescing failure or after thawing.
-# The first argument passed to each script is
-# "freeze", when invoked before quiescing;
-# "freezefail", when invoked after a quiescing failure; or
-# "thaw", when invoked after thawing.
-# When invoked before quiescing, scripts from the directory are invoked in
-# alphabetically ascending order; when invoked following a quiescing failure
-# or thawing, they are invoked in the reverse order. Any subdirectories are
-# ignored.
-# Note that the legacy pre-freeze-script is invoked only before quiescing as
-# the first script and post-thaw-script is invoked after a quiescing failure
-# as well as after thawing as the last script.
-
-#execScripts=true
-
-# Additional argument to be passed to scripts
-#scriptArg=
-
-[guestoperations]
-
-# to disable all guest ops
-#disabled=false
-
-# Whether to use vgauth for guest op authentication
-#useVGAuth=true
-
-[autoupgrade]
-
-# The "allow-upgrade" option controls whether automatic upgrades (or reinstalls)
-# are allowed.
-#allow-upgrade=true
-
-# The autoupgrade plugin is only available for Windows.
-# The "allow-add-feature" and "allow-remove-feature" control whether adding
-# or removing a feature will be allowed.
-# The allow-msi-transforms option controls whether TRANSFORMS property is
-# allowed.
-
-#allow-add-feature=true
-#allow-remove-feature=true
-#allow-msi-transforms=false
-
-[deployPkg]
-
-# to disable guest customization
-#enable-customization=false
-
-# This "wait-cloudinit-timeout" option controls how long does guest
-# customization wait for cloud-init execution done when it detects cloud-init
-# is available in guest.
-# Guest customization will continue executing as soon as it detects cloud-init
-# execution done within this option's value in seconds.
-# If cloud-init is still running beyond this option's value in seconds, guest
-# customization will continue executing regardless cloud-init execution status.
-# Minimum valid value is 0 second, set to 0 to disable waiting.
-# Maximum valid value is 1800 seconds (30 minutes).
-# Default value is 30 seconds.
-#wait-cloudinit-timeout=30
-
-[cbhelper]
-
-# The carbonblack helper plugin is only available for Windows.
-
-# User-defined poll interval in seconds. Set to 0 to disable polling.
-#poll-interval=60
-
-[gueststoreupgrade]
-
-# The guestStoreUpgrade plugin is only available for Windows.
-
-# The policy value is one of the settings listed below.
-# off         = no VMware Tools upgrade from GuestStore. Feature is
-#               disabled.
-# manual      = (Default) VMware Tools upgrade from GuestStore is
-#               manually started.
-# powercycle  = VMware Tools upgrade from GuestStore on system
-#               power on.
-
-#policy=manual
-
-# Time interval for periodically checking available VMware Tools package
-# version in the GuestStore.
-# User-defined poll interval in seconds. Set to 0 to disable polling.
-# Minimum valid value is 900 seconds (15 minutes)
-# Default value is 3600 seconds (60 minutes)
-#poll-interval=3600
-
-# VMware Tools package version metadata key to specify a VMware Tools
-# package version in the GuestStore.
-# User-defined key for VMware Tools package version.
-# Default value is "vmtools" which points to the latest version of
-# VMware Tools package in the GuestStore.
-#vmtools-version-key=vmtools
-
-[devicehelper]
-
-# The deviceHelper plugin is only available for Windows.
-
-# Set to true to disable the deviceHelper plugin.
-#disabled=false

vmware-tools/vgauth.conf

@@ -1,5 +0,0 @@
-[service]
-samlSchemaDir = /etc/vmware-tools/vgauth/schemas
-
-[localization]
-msgCatalog = /usr/share/open-vm-tools

vmware-tools/vgauth/schemas/XMLSchema-hasFacetAndProperty.xsd

@@ -1,142 +0,0 @@
-<?xml version='1.0'?>
-<!DOCTYPE schema PUBLIC "-//W3C//DTD XMLSCHEMA 200102//EN" "XMLSchema.dtd" [
-<!ENTITY % s ''>
-<!ENTITY % p ''>
-<!-- keep this XML 1.0 correct -->
-<!ATTLIST schema xmlns:hfp CDATA #IMPLIED
-                 xmlns:xhtml CDATA #IMPLIED
-                 xmlns:xsi CDATA #IMPLIED
-                 xsi:schemaLocation CDATA #IMPLIED>
-<!ELEMENT xhtml:p ANY>
-<!ELEMENT xhtml:em ANY>
-]>
-<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://www.w3.org/2001/XMLSchema-hasFacetAndProperty" xmlns:hfp="http://www.w3.org/2001/XMLSchema-hasFacetAndProperty" xmlns:xhtml="http://www.w3.org/1999/xhtml"
-        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
-        xsi:schemaLocation="http://www.w3.org/1999/xhtml http://www.w3.org/1999/xhtml.xsd">
-
- <annotation>
-  <documentation>
-   <xhtml:p> This schema defines 2 elements for use in the
-appinfo portion section of (potentially) all builtin datatypes in the schema
-for XML Schema Part 2: Datatypes.  </xhtml:p>
-   <xhtml:p> One intended use of
-this appinfo is in the generation of the HTML version of the XML Schema Part 2:
-Datatypes specification itself.  All portions of the HTML text which describe
-the facets and/or properties of each datatype is generated by an XSLT
-transformation which keys off of this appinfo.  </xhtml:p>
-   <xhtml:p> Schema
-processors may have another use for this appinfo (although one certainly not
-required in any way by the specification).  The information may be useful in
-dynamically building validation modules/classes and/or user-interfaces for
-schema creation.  </xhtml:p>
-  </documentation>
- </annotation>
-
- <element name="hasFacet">
-  <annotation>
-   <documentation>
-   <xhtml:p>
-    hasFacet is used to signal that the contraining facet
-    given in the name attribute is applicable to a primitive
-    datatype (and all types derived from it).
-</xhtml:p>
-   <xhtml:p>
-    Note: this element will only appear in the appinfo of
-    primitive types or built-in types derived by "list".
-   </xhtml:p>
-   <xhtml:p>
-    A schema processor (or the XSLT which generates the
-    HTML version of the XML Schema Part 2: Datatypes
-    specification) which reads a derived simpleType
-    definition should walk up the base type chain until
-    it reaches the primitive type at the top of the chain
-    and "push" all facets found their down to all derived
-    types in the chain.
-   </xhtml:p>
-   </documentation>
-  </annotation>
-  <complexType>
-   <attribute name="name" use="required">
-    <simpleType>
-     <annotation>
-      <documentation>
-       <xhtml:p>
-        This datatype names all existing contraining facets.
-</xhtml:p>
-       <xhtml:p>
-        Question: should each of the enumerations below be
-        given a documentation annotation, which would contain
-        the text to be used in the definition of the facet
-        in the XML Schema Part 2: Datatypes specification?
-        Might be nice to try to collect all of that information
-        together here.
-       </xhtml:p>
-      </documentation>
-     </annotation>
-     <restriction base="NMTOKEN">
-      <enumeration value="length"/>
-      <enumeration value="minLength"/>
-      <enumeration value="maxLength"/>
-      <enumeration value="pattern"/>
-      <enumeration value="enumeration"/>
-      <enumeration value="maxInclusive"/>
-      <enumeration value="maxExclusive"/>
-      <enumeration value="minInclusive"/>
-      <enumeration value="minExclusive"/>
-      <enumeration value="totalDigits"/>
-      <enumeration value="fractionDigits"/>
-      <enumeration value="whiteSpace"/>
-      <enumeration value="maxScale"/>
-      <enumeration value="minScale"/>
-     </restriction>
-    </simpleType>
-   </attribute>
-  </complexType>
- </element>
-
- <element name="hasProperty">
-  <annotation>
-   <documentation>
-    <xhtml:p> hasProperty is used to signal that the property
-given in the name attribute has the value given in the value attribute for the
-datatype in which it occurs (and all types derived from it, which do not
-override the value of the property).  </xhtml:p>
-    <xhtml:p> Note: this element
-may appear in the appinfo of primitive and built-in derived types.  </xhtml:p>
-    <xhtml:p> A schema processor (or the XSLT which generates the HTML version of
-the XML Schema Part 2: Datatypes specification) which reads a simpleType
-definition should gather the information from any occurances of hasProperty in
-that simpleType definition, and then walk up the base type chain gathering
-information from any occurances of hasProperty (unless a value was given to the
-name in a dervied type) until either it reaches the primitive type at the top
-of the chain or it has gathered values for all existing properties.  </xhtml:p>
-   </documentation>
-  </annotation>
-  <complexType>
-   <attribute name="name" use="required">
-    <simpleType>
-     <annotation>
-      <documentation>
-       <xhtml:p> This datatype names all existing fundamental
-facets, otherwise known as properties (with the exception of
-<xhtml:em>equality</xhtml:em>, a property which has no
-<xhtml:em>value</xhtml:em>).  </xhtml:p>
-       <xhtml:p> Question: should each of
-the enumerations below be given a documentation annotation, which would contain
-the text to be used in the definition of the properties in the XML Schema Part
-2: Datatypes specification? Might be nice to try to collect all of that
-information together here.  </xhtml:p>
-      </documentation>
-     </annotation>
-     <restriction base="NMTOKEN">
-      <enumeration value="ordered"/>
-      <enumeration value="bounded"/>
-      <enumeration value="cardinality"/>
-      <enumeration value="numeric"/>
-     </restriction>
-    </simpleType>
-   </attribute>
-   <attribute name="value" type="normalizedString" use="required"/>
-  </complexType>
- </element>
-</schema>

vmware-tools/vgauth/schemas/XMLSchema-instance.xsd

@@ -1,37 +0,0 @@
-<?xml version='1.0'?>
-<!DOCTYPE xs:schema SYSTEM "XMLSchema.dtd" [
-<!ELEMENT p ANY>
-<!ELEMENT a ANY>
-<!ATTLIST a href CDATA #IMPLIED>
-<!ELEMENT hr ANY>
-<!ELEMENT h1 ANY>
-<!ELEMENT br ANY>
-]>
-<xs:schema targetNamespace="http://www.w3.org/2001/XMLSchema-instance"
-           xmlns:xs="http://www.w3.org/2001/XMLSchema"
-           xmlns="http://www.w3.org/1999/xhtml">
-  <xs:annotation>
-   <xs:documentation>
-    <h1>XML Schema instance namespace</h1>
-    <p>See <a href="http://www.w3.org/TR/xmlschema-1/">the XML Schema
-       Recommendation</a> for an introduction</p>
-
-
-    <hr />
-    $Date: 2001/03/16 20:25:57 $<br />
-    $Id: XMLSchema-instance.xsd,v 1.4 2001/03/16 20:25:57 ht Exp $
-  </xs:documentation>
- </xs:annotation>
- <xs:annotation>
-  <xs:documentation><p>This schema should never be used as such:
-                    <a href="http://www.w3.org/TR/xmlschema-1/#no-xsi">the XML
-                    Schema Recommendation</a> forbids the declaration of
-                    attributes in this namespace</p>
-  </xs:documentation>
- </xs:annotation>
-
- <xs:attribute name="nil"/>
- <xs:attribute name="type"/>
- <xs:attribute name="schemaLocation"/>
- <xs:attribute name="noNamespaceSchemaLocation"/>
-</xs:schema>

vmware-tools/vgauth/schemas/XMLSchema.dtd

@@ -1,402 +0,0 @@
-<!-- DTD for XML Schemas: Part 1: Structures
-     Public Identifier: "-//W3C//DTD XMLSCHEMA 200102//EN"
-     Official Location: http://www.w3.org/2001/XMLSchema.dtd -->
-<!-- $Id: XMLSchema.dtd,v 1.31 2001/10/24 15:50:16 ht Exp $ -->
-<!-- Note this DTD is NOT normative, or even definitive. -->           <!--d-->
-<!-- prose copy in the structures REC is the definitive version -->    <!--d-->
-<!-- (which shouldn't differ from this one except for this -->         <!--d-->
-<!-- comment and entity expansions, but just in case) -->              <!--d-->
-<!-- With the exception of cases with multiple namespace
-     prefixes for the XML Schema namespace, any XML document which is
-     not valid per this DTD given redefinitions in its internal subset of the
-     'p' and 's' parameter entities below appropriate to its namespace
-     declaration of the XML Schema namespace is almost certainly not
-     a valid schema. -->
-
-<!-- The simpleType element and its constituent parts
-     are defined in XML Schema: Part 2: Datatypes -->
-<!ENTITY % xs-datatypes PUBLIC 'datatypes' 'datatypes.dtd' >
-
-<!ENTITY % p 'xs:'> <!-- can be overriden in the internal subset of a
-                         schema document to establish a different
-                         namespace prefix -->
-<!ENTITY % s ':xs'> <!-- if %p is defined (e.g. as foo:) then you must
-                         also define %s as the suffix for the appropriate
-                         namespace declaration (e.g. :foo) -->
-<!ENTITY % nds 'xmlns%s;'>
-
-<!-- Define all the element names, with optional prefix -->
-<!ENTITY % schema "%p;schema">
-<!ENTITY % complexType "%p;complexType">
-<!ENTITY % complexContent "%p;complexContent">
-<!ENTITY % simpleContent "%p;simpleContent">
-<!ENTITY % extension "%p;extension">
-<!ENTITY % element "%p;element">
-<!ENTITY % unique "%p;unique">
-<!ENTITY % key "%p;key">
-<!ENTITY % keyref "%p;keyref">
-<!ENTITY % selector "%p;selector">
-<!ENTITY % field "%p;field">
-<!ENTITY % group "%p;group">
-<!ENTITY % all "%p;all">
-<!ENTITY % choice "%p;choice">
-<!ENTITY % sequence "%p;sequence">
-<!ENTITY % any "%p;any">
-<!ENTITY % anyAttribute "%p;anyAttribute">
-<!ENTITY % attribute "%p;attribute">
-<!ENTITY % attributeGroup "%p;attributeGroup">
-<!ENTITY % include "%p;include">
-<!ENTITY % import "%p;import">
-<!ENTITY % redefine "%p;redefine">
-<!ENTITY % notation "%p;notation">
-
-<!-- annotation elements -->
-<!ENTITY % annotation "%p;annotation">
-<!ENTITY % appinfo "%p;appinfo">
-<!ENTITY % documentation "%p;documentation">
-
-<!-- Customisation entities for the ATTLIST of each element type.
-     Define one of these if your schema takes advantage of the
-     anyAttribute='##other' in the schema for schemas -->
-
-<!ENTITY % schemaAttrs ''>
-<!ENTITY % complexTypeAttrs ''>
-<!ENTITY % complexContentAttrs ''>
-<!ENTITY % simpleContentAttrs ''>
-<!ENTITY % extensionAttrs ''>
-<!ENTITY % elementAttrs ''>
-<!ENTITY % groupAttrs ''>
-<!ENTITY % allAttrs ''>
-<!ENTITY % choiceAttrs ''>
-<!ENTITY % sequenceAttrs ''>
-<!ENTITY % anyAttrs ''>
-<!ENTITY % anyAttributeAttrs ''>
-<!ENTITY % attributeAttrs ''>
-<!ENTITY % attributeGroupAttrs ''>
-<!ENTITY % uniqueAttrs ''>
-<!ENTITY % keyAttrs ''>
-<!ENTITY % keyrefAttrs ''>
-<!ENTITY % selectorAttrs ''>
-<!ENTITY % fieldAttrs ''>
-<!ENTITY % includeAttrs ''>
-<!ENTITY % importAttrs ''>
-<!ENTITY % redefineAttrs ''>
-<!ENTITY % notationAttrs ''>
-<!ENTITY % annotationAttrs ''>
-<!ENTITY % appinfoAttrs ''>
-<!ENTITY % documentationAttrs ''>
-
-<!ENTITY % complexDerivationSet "CDATA">
-      <!-- #all or space-separated list drawn from derivationChoice -->
-<!ENTITY % blockSet "CDATA">
-      <!-- #all or space-separated list drawn from
-                      derivationChoice + 'substitution' -->
-
-<!ENTITY % mgs '%all; | %choice; | %sequence;'>
-<!ENTITY % cs '%choice; | %sequence;'>
-<!ENTITY % formValues '(qualified|unqualified)'>
-
-
-<!ENTITY % attrDecls    '((%attribute;| %attributeGroup;)*,(%anyAttribute;)?)'>
-
-<!ENTITY % particleAndAttrs '((%mgs; | %group;)?, %attrDecls;)'>
-
-<!-- This is used in part2 -->
-<!ENTITY % restriction1 '((%mgs; | %group;)?)'>
-
-%xs-datatypes;
-
-<!-- the duplication below is to produce an unambiguous content model
-     which allows annotation everywhere -->
-<!ELEMENT %schema; ((%include; | %import; | %redefine; | %annotation;)*,
-                    ((%simpleType; | %complexType;
-                      | %element; | %attribute;
-                      | %attributeGroup; | %group;
-                      | %notation; ),
-                     (%annotation;)*)* )>
-<!ATTLIST %schema;
-   targetNamespace      %URIref;               #IMPLIED
-   version              CDATA                  #IMPLIED
-   %nds;                %URIref;               #FIXED 'http://www.w3.org/2001/XMLSchema'
-   xmlns                CDATA                  #IMPLIED
-   finalDefault         %complexDerivationSet; ''
-   blockDefault         %blockSet;             ''
-   id                   ID                     #IMPLIED
-   elementFormDefault   %formValues;           'unqualified'
-   attributeFormDefault %formValues;           'unqualified'
-   xml:lang             CDATA                  #IMPLIED
-   %schemaAttrs;>
-<!-- Note the xmlns declaration is NOT in the Schema for Schemas,
-     because at the Infoset level where schemas operate,
-     xmlns(:prefix) is NOT an attribute! -->
-<!-- The declaration of xmlns is a convenience for schema authors -->
-
-<!-- The id attribute here and below is for use in external references
-     from non-schemas using simple fragment identifiers.
-     It is NOT used for schema-to-schema reference, internal or
-     external. -->
-
-<!-- a type is a named content type specification which allows attribute
-     declarations-->
-<!-- -->
-
-<!ELEMENT %complexType; ((%annotation;)?,
-                         (%simpleContent;|%complexContent;|
-                          %particleAndAttrs;))>
-
-<!ATTLIST %complexType;
-          name      %NCName;                        #IMPLIED
-          id        ID                              #IMPLIED
-          abstract  %boolean;                       #IMPLIED
-          final     %complexDerivationSet;          #IMPLIED
-          block     %complexDerivationSet;          #IMPLIED
-          mixed (true|false) 'false'
-          %complexTypeAttrs;>
-
-<!-- particleAndAttrs is shorthand for a root type -->
-<!-- mixed is disallowed if simpleContent, overriden if complexContent
-     has one too. -->
-
-<!-- If anyAttribute appears in one or more referenced attributeGroups
-     and/or explicitly, the intersection of the permissions is used -->
-
-<!ELEMENT %complexContent; ((%annotation;)?, (%restriction;|%extension;))>
-<!ATTLIST %complexContent;
-          mixed (true|false) #IMPLIED
-          id    ID           #IMPLIED
-          %complexContentAttrs;>
-
-<!-- restriction should use the branch defined above, not the simple
-     one from part2; extension should use the full model  -->
-
-<!ELEMENT %simpleContent; ((%annotation;)?, (%restriction;|%extension;))>
-<!ATTLIST %simpleContent;
-          id    ID           #IMPLIED
-          %simpleContentAttrs;>
-
-<!-- restriction should use the simple branch from part2, not the
-     one defined above; extension should have no particle  -->
-
-<!ELEMENT %extension; ((%annotation;)?, (%particleAndAttrs;))>
-<!ATTLIST %extension;
-          base  %QName;      #REQUIRED
-          id    ID           #IMPLIED
-          %extensionAttrs;>
-
-<!-- an element is declared by either:
- a name and a type (either nested or referenced via the type attribute)
- or a ref to an existing element declaration -->
-
-<!ELEMENT %element; ((%annotation;)?, (%complexType;| %simpleType;)?,
-                     (%unique; | %key; | %keyref;)*)>
-<!-- simpleType or complexType only if no type|ref attribute -->
-<!-- ref not allowed at top level -->
-<!ATTLIST %element;
-            name               %NCName;               #IMPLIED
-            id                 ID                     #IMPLIED
-            ref                %QName;                #IMPLIED
-            type               %QName;                #IMPLIED
-            minOccurs          %nonNegativeInteger;   #IMPLIED
-            maxOccurs          CDATA                  #IMPLIED
-            nillable           %boolean;              #IMPLIED
-            substitutionGroup  %QName;                #IMPLIED
-            abstract           %boolean;              #IMPLIED
-            final              %complexDerivationSet; #IMPLIED
-            block              %blockSet;             #IMPLIED
-            default            CDATA                  #IMPLIED
-            fixed              CDATA                  #IMPLIED
-            form               %formValues;           #IMPLIED
-            %elementAttrs;>
-<!-- type and ref are mutually exclusive.
-     name and ref are mutually exclusive, one is required -->
-<!-- In the absence of type AND ref, type defaults to type of
-     substitutionGroup, if any, else the ur-type, i.e. unconstrained -->
-<!-- default and fixed are mutually exclusive -->
-
-<!ELEMENT %group; ((%annotation;)?,(%mgs;)?)>
-<!ATTLIST %group;
-          name        %NCName;               #IMPLIED
-          ref         %QName;                #IMPLIED
-          minOccurs   %nonNegativeInteger;   #IMPLIED
-          maxOccurs   CDATA                  #IMPLIED
-          id          ID                     #IMPLIED
-          %groupAttrs;>
-
-<!ELEMENT %all; ((%annotation;)?, (%element;)*)>
-<!ATTLIST %all;
-          minOccurs   (1)                    #IMPLIED
-          maxOccurs   (1)                    #IMPLIED
-          id          ID                     #IMPLIED
-          %allAttrs;>
-
-<!ELEMENT %choice; ((%annotation;)?, (%element;| %group;| %cs; | %any;)*)>
-<!ATTLIST %choice;
-          minOccurs   %nonNegativeInteger;   #IMPLIED
-          maxOccurs   CDATA                  #IMPLIED
-          id          ID                     #IMPLIED
-          %choiceAttrs;>
-
-<!ELEMENT %sequence; ((%annotation;)?, (%element;| %group;| %cs; | %any;)*)>
-<!ATTLIST %sequence;
-          minOccurs   %nonNegativeInteger;   #IMPLIED
-          maxOccurs   CDATA                  #IMPLIED
-          id          ID                     #IMPLIED
-          %sequenceAttrs;>
-
-<!-- an anonymous grouping in a model, or
-     a top-level named group definition, or a reference to same -->
-
-<!-- Note that if order is 'all', group is not allowed inside.
-     If order is 'all' THIS group must be alone (or referenced alone) at
-     the top level of a content model -->
-<!-- If order is 'all', minOccurs==maxOccurs==1 on element/any inside -->
-<!-- Should allow minOccurs=0 inside order='all' . . . -->
-
-<!ELEMENT %any; (%annotation;)?>
-<!ATTLIST %any;
-            namespace       CDATA                  '##any'
-            processContents (skip|lax|strict)      'strict'
-            minOccurs       %nonNegativeInteger;   '1'
-            maxOccurs       CDATA                  '1'
-            id              ID                     #IMPLIED
-            %anyAttrs;>
-
-<!-- namespace is interpreted as follows:
-                  ##any      - - any non-conflicting WFXML at all
-
-                  ##other    - - any non-conflicting WFXML from namespace other
-                                  than targetNamespace
-
-                  ##local    - - any unqualified non-conflicting WFXML/attribute
-                  one or     - - any non-conflicting WFXML from
-                  more URI        the listed namespaces
-                  references
-
-                  ##targetNamespace ##local may appear in the above list,
-                    with the obvious meaning -->
-
-<!ELEMENT %anyAttribute; (%annotation;)?>
-<!ATTLIST %anyAttribute;
-            namespace       CDATA              '##any'
-            processContents (skip|lax|strict)  'strict'
-            id              ID                 #IMPLIED
-            %anyAttributeAttrs;>
-<!-- namespace is interpreted as for 'any' above -->
-
-<!-- simpleType only if no type|ref attribute -->
-<!-- ref not allowed at top level, name iff at top level -->
-<!ELEMENT %attribute; ((%annotation;)?, (%simpleType;)?)>
-<!ATTLIST %attribute;
-          name      %NCName;      #IMPLIED
-          id        ID            #IMPLIED
-          ref       %QName;       #IMPLIED
-          type      %QName;       #IMPLIED
-          use       (prohibited|optional|required) #IMPLIED
-          default   CDATA         #IMPLIED
-          fixed     CDATA         #IMPLIED
-          form      %formValues;  #IMPLIED
-          %attributeAttrs;>
-<!-- type and ref are mutually exclusive.
-     name and ref are mutually exclusive, one is required -->
-<!-- default for use is optional when nested, none otherwise -->
-<!-- default and fixed are mutually exclusive -->
-<!-- type attr and simpleType content are mutually exclusive -->
-
-<!-- an attributeGroup is a named collection of attribute decls, or a
-     reference thereto -->
-<!ELEMENT %attributeGroup; ((%annotation;)?,
-                       (%attribute; | %attributeGroup;)*,
-                       (%anyAttribute;)?) >
-<!ATTLIST %attributeGroup;
-                 name       %NCName;       #IMPLIED
-                 id         ID             #IMPLIED
-                 ref        %QName;        #IMPLIED
-                 %attributeGroupAttrs;>
-
-<!-- ref iff no content, no name.  ref iff not top level -->
-
-<!-- better reference mechanisms -->
-<!ELEMENT %unique; ((%annotation;)?, %selector;, (%field;)+)>
-<!ATTLIST %unique;
-          name     %NCName;       #REQUIRED
-	  id       ID             #IMPLIED
-	  %uniqueAttrs;>
-
-<!ELEMENT %key;    ((%annotation;)?, %selector;, (%field;)+)>
-<!ATTLIST %key;
-          name     %NCName;       #REQUIRED
-	  id       ID             #IMPLIED
-	  %keyAttrs;>
-
-<!ELEMENT %keyref; ((%annotation;)?, %selector;, (%field;)+)>
-<!ATTLIST %keyref;
-          name     %NCName;       #REQUIRED
-	  refer    %QName;        #REQUIRED
-	  id       ID             #IMPLIED
-	  %keyrefAttrs;>
-
-<!ELEMENT %selector; ((%annotation;)?)>
-<!ATTLIST %selector;
-          xpath %XPathExpr; #REQUIRED
-          id    ID          #IMPLIED
-          %selectorAttrs;>
-<!ELEMENT %field; ((%annotation;)?)>
-<!ATTLIST %field;
-          xpath %XPathExpr; #REQUIRED
-          id    ID          #IMPLIED
-          %fieldAttrs;>
-
-<!-- Schema combination mechanisms -->
-<!ELEMENT %include; (%annotation;)?>
-<!ATTLIST %include;
-          schemaLocation %URIref; #REQUIRED
-          id             ID       #IMPLIED
-          %includeAttrs;>
-
-<!ELEMENT %import; (%annotation;)?>
-<!ATTLIST %import;
-          namespace      %URIref; #IMPLIED
-          schemaLocation %URIref; #IMPLIED
-          id             ID       #IMPLIED
-          %importAttrs;>
-
-<!ELEMENT %redefine; (%annotation; | %simpleType; | %complexType; |
-                      %attributeGroup; | %group;)*>
-<!ATTLIST %redefine;
-          schemaLocation %URIref; #REQUIRED
-          id             ID       #IMPLIED
-          %redefineAttrs;>
-
-<!ELEMENT %notation; (%annotation;)?>
-<!ATTLIST %notation;
-	  name        %NCName;    #REQUIRED
-	  id          ID          #IMPLIED
-	  public      CDATA       #REQUIRED
-	  system      %URIref;    #IMPLIED
-	  %notationAttrs;>
-
-<!-- Annotation is either application information or documentation -->
-<!-- By having these here they are available for datatypes as well
-     as all the structures elements -->
-
-<!ELEMENT %annotation; (%appinfo; | %documentation;)*>
-<!ATTLIST %annotation; %annotationAttrs;>
-
-<!-- User must define annotation elements in internal subset for this
-     to work -->
-<!ELEMENT %appinfo; ANY>   <!-- too restrictive -->
-<!ATTLIST %appinfo;
-          source     %URIref;      #IMPLIED
-          id         ID         #IMPLIED
-          %appinfoAttrs;>
-<!ELEMENT %documentation; ANY>   <!-- too restrictive -->
-<!ATTLIST %documentation;
-          source     %URIref;   #IMPLIED
-          id         ID         #IMPLIED
-          xml:lang   CDATA      #IMPLIED
-          %documentationAttrs;>
-
-<!NOTATION XMLSchemaStructures PUBLIC
-           'structures' 'http://www.w3.org/2001/XMLSchema.xsd' >
-<!NOTATION XML PUBLIC
-           'REC-xml-1998-0210' 'http://www.w3.org/TR/1998/REC-xml-19980210' >

vmware-tools/vgauth/schemas/catalog.xml

@@ -1,6 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE catalog PUBLIC "-//OASIS//DTD Entity Resolution XML Catalog V1.0//EN" "http://www.oasis-open.org/committees/entity/release/1.0/catalog.dtd">
-<catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog">
-  <uri name="http://www.w3.org/TR/2002/REC-xmldsig-core-20020212/xmldsig-core-schema.xsd" uri="xmldsig-core-schema.xsd"/>
-  <uri name="http://www.w3.org/TR/2002/REC-xmlenc-core-20021210/xenc-schema.xsd" uri="xenc-schema.xsd"/>
-</catalog>

vmware-tools/vgauth/schemas/datatypes.dtd

@@ -1,203 +0,0 @@
-<!--
-        DTD for XML Schemas: Part 2: Datatypes
-        $Id: datatypes.dtd,v 1.23 2001/03/16 17:36:30 ht Exp $
-        Note this DTD is NOT normative, or even definitive. - - the
-        prose copy in the datatypes REC is the definitive version
-        (which shouldn't differ from this one except for this comment
-        and entity expansions, but just in case)
-  -->
-
-<!--
-        This DTD cannot be used on its own, it is intended
-        only for incorporation in XMLSchema.dtd, q.v.
-  -->
-
-<!-- Define all the element names, with optional prefix -->
-<!ENTITY % simpleType "%p;simpleType">
-<!ENTITY % restriction "%p;restriction">
-<!ENTITY % list "%p;list">
-<!ENTITY % union "%p;union">
-<!ENTITY % maxExclusive "%p;maxExclusive">
-<!ENTITY % minExclusive "%p;minExclusive">
-<!ENTITY % maxInclusive "%p;maxInclusive">
-<!ENTITY % minInclusive "%p;minInclusive">
-<!ENTITY % totalDigits "%p;totalDigits">
-<!ENTITY % fractionDigits "%p;fractionDigits">
-<!ENTITY % length "%p;length">
-<!ENTITY % minLength "%p;minLength">
-<!ENTITY % maxLength "%p;maxLength">
-<!ENTITY % enumeration "%p;enumeration">
-<!ENTITY % whiteSpace "%p;whiteSpace">
-<!ENTITY % pattern "%p;pattern">
-
-<!--
-        Customisation entities for the ATTLIST of each element
-        type. Define one of these if your schema takes advantage
-        of the anyAttribute='##other' in the schema for schemas
-  -->
-
-<!ENTITY % simpleTypeAttrs "">
-<!ENTITY % restrictionAttrs "">
-<!ENTITY % listAttrs "">
-<!ENTITY % unionAttrs "">
-<!ENTITY % maxExclusiveAttrs "">
-<!ENTITY % minExclusiveAttrs "">
-<!ENTITY % maxInclusiveAttrs "">
-<!ENTITY % minInclusiveAttrs "">
-<!ENTITY % totalDigitsAttrs "">
-<!ENTITY % fractionDigitsAttrs "">
-<!ENTITY % lengthAttrs "">
-<!ENTITY % minLengthAttrs "">
-<!ENTITY % maxLengthAttrs "">
-<!ENTITY % enumerationAttrs "">
-<!ENTITY % whiteSpaceAttrs "">
-<!ENTITY % patternAttrs "">
-
-<!-- Define some entities for informative use as attribute
-        types -->
-<!ENTITY % URIref "CDATA">
-<!ENTITY % XPathExpr "CDATA">
-<!ENTITY % QName "NMTOKEN">
-<!ENTITY % QNames "NMTOKENS">
-<!ENTITY % NCName "NMTOKEN">
-<!ENTITY % nonNegativeInteger "NMTOKEN">
-<!ENTITY % boolean "(true|false)">
-<!ENTITY % simpleDerivationSet "CDATA">
-<!--
-        #all or space-separated list drawn from derivationChoice
-  -->
-
-<!--
-        Note that the use of 'facet' below is less restrictive
-        than is really intended:  There should in fact be no
-        more than one of each of minInclusive, minExclusive,
-        maxInclusive, maxExclusive, totalDigits, fractionDigits,
-        length, maxLength, minLength within datatype,
-        and the min- and max- variants of Inclusive and Exclusive
-        are mutually exclusive. On the other hand,  pattern and
-        enumeration may repeat.
-  -->
-<!ENTITY % minBound "(%minInclusive; | %minExclusive;)">
-<!ENTITY % maxBound "(%maxInclusive; | %maxExclusive;)">
-<!ENTITY % bounds "%minBound; | %maxBound;">
-<!ENTITY % numeric "%totalDigits; | %fractionDigits;">
-<!ENTITY % ordered "%bounds; | %numeric;">
-<!ENTITY % unordered
-   "%pattern; | %enumeration; | %whiteSpace; | %length; |
-   %maxLength; | %minLength;">
-<!ENTITY % facet "%ordered; | %unordered;">
-<!ENTITY % facetAttr
-        "value CDATA #REQUIRED
-        id ID #IMPLIED">
-<!ENTITY % fixedAttr "fixed %boolean; #IMPLIED">
-<!ENTITY % facetModel "(%annotation;)?">
-<!ELEMENT %simpleType;
-        ((%annotation;)?, (%restriction; | %list; | %union;))>
-<!ATTLIST %simpleType;
-    name      %NCName; #IMPLIED
-    final     %simpleDerivationSet; #IMPLIED
-    id        ID       #IMPLIED
-    %simpleTypeAttrs;>
-<!-- name is required at top level -->
-<!ELEMENT %restriction; ((%annotation;)?,
-                         (%restriction1; |
-                          ((%simpleType;)?,(%facet;)*)),
-                         (%attrDecls;))>
-<!ATTLIST %restriction;
-    base      %QName;                  #IMPLIED
-    id        ID       #IMPLIED
-    %restrictionAttrs;>
-<!--
-        base and simpleType child are mutually exclusive,
-        one is required.
-
-        restriction is shared between simpleType and
-        simpleContent and complexContent (in XMLSchema.xsd).
-        restriction1 is for the latter cases, when this
-        is restricting a complex type, as is attrDecls.
-  -->
-<!ELEMENT %list; ((%annotation;)?,(%simpleType;)?)>
-<!ATTLIST %list;
-    itemType      %QName;             #IMPLIED
-    id        ID       #IMPLIED
-    %listAttrs;>
-<!--
-        itemType and simpleType child are mutually exclusive,
-        one is required
-  -->
-<!ELEMENT %union; ((%annotation;)?,(%simpleType;)*)>
-<!ATTLIST %union;
-    id            ID       #IMPLIED
-    memberTypes   %QNames;            #IMPLIED
-    %unionAttrs;>
-<!--
-        At least one item in memberTypes or one simpleType
-        child is required
-  -->
-
-<!ELEMENT %maxExclusive; %facetModel;>
-<!ATTLIST %maxExclusive;
-        %facetAttr;
-        %fixedAttr;
-        %maxExclusiveAttrs;>
-<!ELEMENT %minExclusive; %facetModel;>
-<!ATTLIST %minExclusive;
-        %facetAttr;
-        %fixedAttr;
-        %minExclusiveAttrs;>
-
-<!ELEMENT %maxInclusive; %facetModel;>
-<!ATTLIST %maxInclusive;
-        %facetAttr;
-        %fixedAttr;
-        %maxInclusiveAttrs;>
-<!ELEMENT %minInclusive; %facetModel;>
-<!ATTLIST %minInclusive;
-        %facetAttr;
-        %fixedAttr;
-        %minInclusiveAttrs;>
-
-<!ELEMENT %totalDigits; %facetModel;>
-<!ATTLIST %totalDigits;
-        %facetAttr;
-        %fixedAttr;
-        %totalDigitsAttrs;>
-<!ELEMENT %fractionDigits; %facetModel;>
-<!ATTLIST %fractionDigits;
-        %facetAttr;
-        %fixedAttr;
-        %fractionDigitsAttrs;>
-
-<!ELEMENT %length; %facetModel;>
-<!ATTLIST %length;
-        %facetAttr;
-        %fixedAttr;
-        %lengthAttrs;>
-<!ELEMENT %minLength; %facetModel;>
-<!ATTLIST %minLength;
-        %facetAttr;
-        %fixedAttr;
-        %minLengthAttrs;>
-<!ELEMENT %maxLength; %facetModel;>
-<!ATTLIST %maxLength;
-        %facetAttr;
-        %fixedAttr;
-        %maxLengthAttrs;>
-
-<!-- This one can be repeated -->
-<!ELEMENT %enumeration; %facetModel;>
-<!ATTLIST %enumeration;
-        %facetAttr;
-        %enumerationAttrs;>
-
-<!ELEMENT %whiteSpace; %facetModel;>
-<!ATTLIST %whiteSpace;
-        %facetAttr;
-        %fixedAttr;
-        %whiteSpaceAttrs;>
-
-<!-- This one can be repeated -->
-<!ELEMENT %pattern; %facetModel;>
-<!ATTLIST %pattern;
-        %facetAttr;
-        %patternAttrs;>

vmware-tools/vgauth/schemas/saml-schema-assertion-2.0.xsd

@@ -1,283 +0,0 @@
-<?xml version="1.0" encoding="US-ASCII"?>
-<schema
-    targetNamespace="urn:oasis:names:tc:SAML:2.0:assertion"
-    xmlns="http://www.w3.org/2001/XMLSchema"
-    xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion"
-    xmlns:ds="http://www.w3.org/2000/09/xmldsig#"
-    xmlns:xenc="http://www.w3.org/2001/04/xmlenc#"
-    elementFormDefault="unqualified"
-    attributeFormDefault="unqualified"
-    blockDefault="substitution"
-    version="2.0">
-    <import namespace="http://www.w3.org/2000/09/xmldsig#"
-        schemaLocation="http://www.w3.org/TR/2002/REC-xmldsig-core-20020212/xmldsig-core-schema.xsd"/>
-    <import namespace="http://www.w3.org/2001/04/xmlenc#"
-        schemaLocation="http://www.w3.org/TR/2002/REC-xmlenc-core-20021210/xenc-schema.xsd"/>
-    <annotation>
-        <documentation>
-            Document identifier: saml-schema-assertion-2.0
-            Location: http://docs.oasis-open.org/security/saml/v2.0/
-            Revision history:
-            V1.0 (November, 2002):
-              Initial Standard Schema.
-            V1.1 (September, 2003):
-              Updates within the same V1.0 namespace.
-            V2.0 (March, 2005):
-              New assertion schema for SAML V2.0 namespace.
-        </documentation>
-    </annotation>
-    <attributeGroup name="IDNameQualifiers">
-        <attribute name="NameQualifier" type="string" use="optional"/>
-        <attribute name="SPNameQualifier" type="string" use="optional"/>
-    </attributeGroup>
-    <element name="BaseID" type="saml:BaseIDAbstractType"/>
-    <complexType name="BaseIDAbstractType" abstract="true">
-        <attributeGroup ref="saml:IDNameQualifiers"/>
-    </complexType>
-    <element name="NameID" type="saml:NameIDType"/>
-    <complexType name="NameIDType">
-        <simpleContent>
-            <extension base="string">
-                <attributeGroup ref="saml:IDNameQualifiers"/>
-                <attribute name="Format" type="anyURI" use="optional"/>
-                <attribute name="SPProvidedID" type="string" use="optional"/>
-            </extension>
-        </simpleContent>
-    </complexType>
-    <complexType name="EncryptedElementType">
-        <sequence>
-            <element ref="xenc:EncryptedData"/>
-            <element ref="xenc:EncryptedKey" minOccurs="0" maxOccurs="unbounded"/>
-        </sequence>
-    </complexType>
-    <element name="EncryptedID" type="saml:EncryptedElementType"/>
-    <element name="Issuer" type="saml:NameIDType"/>
-    <element name="AssertionIDRef" type="NCName"/>
-    <element name="AssertionURIRef" type="anyURI"/>
-    <element name="Assertion" type="saml:AssertionType"/>
-    <complexType name="AssertionType">
-        <sequence>
-            <element ref="saml:Issuer"/>
-            <element ref="ds:Signature" minOccurs="0"/>
-            <element ref="saml:Subject" minOccurs="0"/>
-            <element ref="saml:Conditions" minOccurs="0"/>
-            <element ref="saml:Advice" minOccurs="0"/>
-            <choice minOccurs="0" maxOccurs="unbounded">
-                <element ref="saml:Statement"/>
-                <element ref="saml:AuthnStatement"/>
-                <element ref="saml:AuthzDecisionStatement"/>
-                <element ref="saml:AttributeStatement"/>
-            </choice>
-        </sequence>
-        <attribute name="Version" type="string" use="required"/>
-        <attribute name="ID" type="ID" use="required"/>
-        <attribute name="IssueInstant" type="dateTime" use="required"/>
-    </complexType>
-    <element name="Subject" type="saml:SubjectType"/>
-    <complexType name="SubjectType">
-        <choice>
-            <sequence>
-                <choice>
-                    <element ref="saml:BaseID"/>
-                    <element ref="saml:NameID"/>
-                    <element ref="saml:EncryptedID"/>
-                </choice>
-                <element ref="saml:SubjectConfirmation" minOccurs="0" maxOccurs="unbounded"/>
-            </sequence>
-            <element ref="saml:SubjectConfirmation" maxOccurs="unbounded"/>
-        </choice>
-    </complexType>
-    <element name="SubjectConfirmation" type="saml:SubjectConfirmationType"/>
-    <complexType name="SubjectConfirmationType">
-        <sequence>
-            <choice minOccurs="0">
-                <element ref="saml:BaseID"/>
-                <element ref="saml:NameID"/>
-                <element ref="saml:EncryptedID"/>
-            </choice>
-            <element ref="saml:SubjectConfirmationData" minOccurs="0"/>
-        </sequence>
-        <attribute name="Method" type="anyURI" use="required"/>
-    </complexType>
-    <element name="SubjectConfirmationData" type="saml:SubjectConfirmationDataType"/>
-    <complexType name="SubjectConfirmationDataType" mixed="true">
-        <complexContent>
-            <restriction base="anyType">
-                <sequence>
-                    <any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
-                </sequence>
-                <attribute name="NotBefore" type="dateTime" use="optional"/>
-                <attribute name="NotOnOrAfter" type="dateTime" use="optional"/>
-                <attribute name="Recipient" type="anyURI" use="optional"/>
-                <attribute name="InResponseTo" type="NCName" use="optional"/>
-                <attribute name="Address" type="string" use="optional"/>
-                <anyAttribute namespace="##other" processContents="lax"/>
-            </restriction>
-        </complexContent>
-    </complexType>
-    <complexType name="KeyInfoConfirmationDataType" mixed="false">
-        <complexContent>
-            <restriction base="saml:SubjectConfirmationDataType">
-                <sequence>
-                    <element ref="ds:KeyInfo" maxOccurs="unbounded"/>
-                </sequence>
-            </restriction>
-        </complexContent>
-    </complexType>
-    <element name="Conditions" type="saml:ConditionsType"/>
-    <complexType name="ConditionsType">
-        <choice minOccurs="0" maxOccurs="unbounded">
-            <element ref="saml:Condition"/>
-            <element ref="saml:AudienceRestriction"/>
-            <element ref="saml:OneTimeUse"/>
-            <element ref="saml:ProxyRestriction"/>
-        </choice>
-        <attribute name="NotBefore" type="dateTime" use="optional"/>
-        <attribute name="NotOnOrAfter" type="dateTime" use="optional"/>
-    </complexType>
-    <element name="Condition" type="saml:ConditionAbstractType"/>
-    <complexType name="ConditionAbstractType" abstract="true"/>
-    <element name="AudienceRestriction" type="saml:AudienceRestrictionType"/>
-    <complexType name="AudienceRestrictionType">
-        <complexContent>
-            <extension base="saml:ConditionAbstractType">
-                <sequence>
-                    <element ref="saml:Audience" maxOccurs="unbounded"/>
-                </sequence>
-            </extension>
-        </complexContent>
-    </complexType>
-    <element name="Audience" type="anyURI"/>
-    <element name="OneTimeUse" type="saml:OneTimeUseType" />
-    <complexType name="OneTimeUseType">
-        <complexContent>
-            <extension base="saml:ConditionAbstractType"/>
-        </complexContent>
-    </complexType>
-    <element name="ProxyRestriction" type="saml:ProxyRestrictionType"/>
-    <complexType name="ProxyRestrictionType">
-    <complexContent>
-        <extension base="saml:ConditionAbstractType">
-            <sequence>
-                <element ref="saml:Audience" minOccurs="0" maxOccurs="unbounded"/>
-            </sequence>
-            <attribute name="Count" type="nonNegativeInteger" use="optional"/>
-        </extension>
-	</complexContent>
-    </complexType>
-    <element name="Advice" type="saml:AdviceType"/>
-    <complexType name="AdviceType">
-        <choice minOccurs="0" maxOccurs="unbounded">
-            <element ref="saml:AssertionIDRef"/>
-            <element ref="saml:AssertionURIRef"/>
-            <element ref="saml:Assertion"/>
-            <element ref="saml:EncryptedAssertion"/>
-            <any namespace="##other" processContents="lax"/>
-        </choice>
-    </complexType>
-    <element name="EncryptedAssertion" type="saml:EncryptedElementType"/>
-    <element name="Statement" type="saml:StatementAbstractType"/>
-    <complexType name="StatementAbstractType" abstract="true"/>
-    <element name="AuthnStatement" type="saml:AuthnStatementType"/>
-    <complexType name="AuthnStatementType">
-        <complexContent>
-            <extension base="saml:StatementAbstractType">
-                <sequence>
-                    <element ref="saml:SubjectLocality" minOccurs="0"/>
-                    <element ref="saml:AuthnContext"/>
-                </sequence>
-                <attribute name="AuthnInstant" type="dateTime" use="required"/>
-                <attribute name="SessionIndex" type="string" use="optional"/>
-                <attribute name="SessionNotOnOrAfter" type="dateTime" use="optional"/>
-            </extension>
-        </complexContent>
-    </complexType>
-    <element name="SubjectLocality" type="saml:SubjectLocalityType"/>
-    <complexType name="SubjectLocalityType">
-        <attribute name="Address" type="string" use="optional"/>
-        <attribute name="DNSName" type="string" use="optional"/>
-    </complexType>
-    <element name="AuthnContext" type="saml:AuthnContextType"/>
-    <complexType name="AuthnContextType">
-        <sequence>
-            <choice>
-                <sequence>
-                    <element ref="saml:AuthnContextClassRef"/>
-                    <choice minOccurs="0">
-                        <element ref="saml:AuthnContextDecl"/>
-                        <element ref="saml:AuthnContextDeclRef"/>
-                    </choice>
-                </sequence>
-                <choice>
-                    <element ref="saml:AuthnContextDecl"/>
-                    <element ref="saml:AuthnContextDeclRef"/>
-                </choice>
-            </choice>
-            <element ref="saml:AuthenticatingAuthority" minOccurs="0" maxOccurs="unbounded"/>
-        </sequence>
-    </complexType>
-    <element name="AuthnContextClassRef" type="anyURI"/>
-    <element name="AuthnContextDeclRef" type="anyURI"/>
-    <element name="AuthnContextDecl" type="anyType"/>
-    <element name="AuthenticatingAuthority" type="anyURI"/>
-    <element name="AuthzDecisionStatement" type="saml:AuthzDecisionStatementType"/>
-    <complexType name="AuthzDecisionStatementType">
-        <complexContent>
-            <extension base="saml:StatementAbstractType">
-                <sequence>
-                    <element ref="saml:Action" maxOccurs="unbounded"/>
-                    <element ref="saml:Evidence" minOccurs="0"/>
-                </sequence>
-                <attribute name="Resource" type="anyURI" use="required"/>
-                <attribute name="Decision" type="saml:DecisionType" use="required"/>
-            </extension>
-        </complexContent>
-    </complexType>
-    <simpleType name="DecisionType">
-        <restriction base="string">
-            <enumeration value="Permit"/>
-            <enumeration value="Deny"/>
-            <enumeration value="Indeterminate"/>
-        </restriction>
-    </simpleType>
-    <element name="Action" type="saml:ActionType"/>
-    <complexType name="ActionType">
-        <simpleContent>
-            <extension base="string">
-                <attribute name="Namespace" type="anyURI" use="required"/>
-            </extension>
-        </simpleContent>
-    </complexType>
-    <element name="Evidence" type="saml:EvidenceType"/>
-    <complexType name="EvidenceType">
-        <choice maxOccurs="unbounded">
-            <element ref="saml:AssertionIDRef"/>
-            <element ref="saml:AssertionURIRef"/>
-            <element ref="saml:Assertion"/>
-            <element ref="saml:EncryptedAssertion"/>
-        </choice>
-    </complexType>
-    <element name="AttributeStatement" type="saml:AttributeStatementType"/>
-    <complexType name="AttributeStatementType">
-        <complexContent>
-            <extension base="saml:StatementAbstractType">
-                <choice maxOccurs="unbounded">
-                    <element ref="saml:Attribute"/>
-                    <element ref="saml:EncryptedAttribute"/>
-                </choice>
-            </extension>
-        </complexContent>
-    </complexType>
-    <element name="Attribute" type="saml:AttributeType"/>
-    <complexType name="AttributeType">
-        <sequence>
-            <element ref="saml:AttributeValue" minOccurs="0" maxOccurs="unbounded"/>
-        </sequence>
-        <attribute name="Name" type="string" use="required"/>
-        <attribute name="NameFormat" type="anyURI" use="optional"/>
-        <attribute name="FriendlyName" type="string" use="optional"/>
-        <anyAttribute namespace="##other" processContents="lax"/>
-    </complexType>
-    <element name="AttributeValue" type="anyType" nillable="true"/>
-    <element name="EncryptedAttribute" type="saml:EncryptedElementType"/>
-</schema>

vmware-tools/vgauth/schemas/xenc-schema.xsd

@@ -1,135 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE schema PUBLIC "-//W3C//DTD XMLSchema 200102//EN" "XMLSchema.dtd" [
-   <!ATTLIST schema
-     xmlns:xenc CDATA #FIXED 'http://www.w3.org/2001/04/xmlenc#'
-     xmlns:ds CDATA #FIXED 'http://www.w3.org/2000/09/xmldsig#'>
-   <!ENTITY xenc 'http://www.w3.org/2001/04/xmlenc#'>
-   <!ENTITY % p ''>
-   <!ENTITY % s ''>
-  ]>
-<schema xmlns="http://www.w3.org/2001/XMLSchema" version="1.0" xmlns:xenc="http://www.w3.org/2001/04/xmlenc#" xmlns:ds="http://www.w3.org/2000/09/xmldsig#" targetNamespace="http://www.w3.org/2001/04/xmlenc#" elementFormDefault="qualified">
-
-  <import namespace="http://www.w3.org/2000/09/xmldsig#" schemaLocation="http://www.w3.org/TR/2002/REC-xmldsig-core-20020212/xmldsig-core-schema.xsd"/>
-
-  <complexType name="EncryptedType" abstract="true">
-    <sequence>
-      <element name="EncryptionMethod" type="xenc:EncryptionMethodType" minOccurs="0"/>
-      <element ref="ds:KeyInfo" minOccurs="0"/>
-      <element ref="xenc:CipherData"/>
-      <element ref="xenc:EncryptionProperties" minOccurs="0"/>
-    </sequence>
-    <attribute name="Id" type="ID" use="optional"/>
-    <attribute name="Type" type="anyURI" use="optional"/>
-    <attribute name="MimeType" type="string" use="optional"/>
-    <attribute name="Encoding" type="anyURI" use="optional"/>
-  </complexType>
-
-  <complexType name="EncryptionMethodType" mixed="true">
-    <sequence>
-      <element name="KeySize" minOccurs="0" type="xenc:KeySizeType"/>
-      <element name="OAEPparams" minOccurs="0" type="base64Binary"/>
-      <any namespace="##other" minOccurs="0" maxOccurs="unbounded"/>
-    </sequence>
-    <attribute name="Algorithm" type="anyURI" use="required"/>
-  </complexType>
-
-    <simpleType name="KeySizeType">
-      <restriction base="integer"/>
-    </simpleType>
-
-  <element name="CipherData" type="xenc:CipherDataType"/>
-  <complexType name="CipherDataType">
-     <choice>
-       <element name="CipherValue" type="base64Binary"/>
-       <element ref="xenc:CipherReference"/>
-     </choice>
-    </complexType>
-
-   <element name="CipherReference" type="xenc:CipherReferenceType"/>
-   <complexType name="CipherReferenceType">
-       <choice>
-         <element name="Transforms" type="xenc:TransformsType" minOccurs="0"/>
-       </choice>
-       <attribute name="URI" type="anyURI" use="required"/>
-   </complexType>
-
-     <complexType name="TransformsType">
-       <sequence>
-         <element ref="ds:Transform" maxOccurs="unbounded"/>
-       </sequence>
-     </complexType>
-
-
-  <element name="EncryptedData" type="xenc:EncryptedDataType"/>
-  <complexType name="EncryptedDataType">
-    <complexContent>
-      <extension base="xenc:EncryptedType">
-       </extension>
-    </complexContent>
-  </complexType>
-
-  <!-- Children of ds:KeyInfo -->
-
-  <element name="EncryptedKey" type="xenc:EncryptedKeyType"/>
-  <complexType name="EncryptedKeyType">
-    <complexContent>
-      <extension base="xenc:EncryptedType">
-        <sequence>
-          <element ref="xenc:ReferenceList" minOccurs="0"/>
-          <element name="CarriedKeyName" type="string" minOccurs="0"/>
-        </sequence>
-        <attribute name="Recipient" type="string" use="optional"/>
-      </extension>
-    </complexContent>
-  </complexType>
-
-    <element name="AgreementMethod" type="xenc:AgreementMethodType"/>
-    <complexType name="AgreementMethodType" mixed="true">
-      <sequence>
-        <element name="KA-Nonce" minOccurs="0" type="base64Binary"/>
-        <!-- <element ref="ds:DigestMethod" minOccurs="0"/> -->
-        <any namespace="##other" minOccurs="0" maxOccurs="unbounded"/>
-        <element name="OriginatorKeyInfo" minOccurs="0" type="ds:KeyInfoType"/>
-        <element name="RecipientKeyInfo" minOccurs="0" type="ds:KeyInfoType"/>
-      </sequence>
-      <attribute name="Algorithm" type="anyURI" use="required"/>
-    </complexType>
-
-  <!-- End Children of ds:KeyInfo -->
-
-  <element name="ReferenceList">
-    <complexType>
-      <choice minOccurs="1" maxOccurs="unbounded">
-        <element name="DataReference" type="xenc:ReferenceType"/>
-        <element name="KeyReference" type="xenc:ReferenceType"/>
-      </choice>
-    </complexType>
-  </element>
-
-  <complexType name="ReferenceType">
-    <sequence>
-      <any namespace="##other" minOccurs="0" maxOccurs="unbounded"/>
-    </sequence>
-    <attribute name="URI" type="anyURI" use="required"/>
-  </complexType>
-
-
-  <element name="EncryptionProperties" type="xenc:EncryptionPropertiesType"/>
-  <complexType name="EncryptionPropertiesType">
-    <sequence>
-      <element ref="xenc:EncryptionProperty" maxOccurs="unbounded"/>
-    </sequence>
-    <attribute name="Id" type="ID" use="optional"/>
-  </complexType>
-
-    <element name="EncryptionProperty" type="xenc:EncryptionPropertyType"/>
-    <complexType name="EncryptionPropertyType" mixed="true">
-      <choice maxOccurs="unbounded">
-        <any namespace="##other" processContents="lax"/>
-      </choice>
-      <attribute name="Target" type="anyURI" use="optional"/>
-      <attribute name="Id" type="ID" use="optional"/>
-      <anyAttribute namespace="http://www.w3.org/XML/1998/namespace"/>
-    </complexType>
-
-</schema>

vmware-tools/vgauth/schemas/xml.xsd

@@ -1,287 +0,0 @@
-<?xml version='1.0'?>
-<?xml-stylesheet href="../2008/09/xsd.xsl" type="text/xsl"?>
-<xs:schema targetNamespace="http://www.w3.org/XML/1998/namespace"
-  xmlns:xs="http://www.w3.org/2001/XMLSchema"
-  xmlns   ="http://www.w3.org/1999/xhtml"
-  xml:lang="en">
-
- <xs:annotation>
-  <xs:documentation>
-   <div>
-    <h1>About the XML namespace</h1>
-
-    <div class="bodytext">
-     <p>
-      This schema document describes the XML namespace, in a form
-      suitable for import by other schema documents.
-     </p>
-     <p>
-      See <a href="http://www.w3.org/XML/1998/namespace.html">
-      http://www.w3.org/XML/1998/namespace.html</a> and
-      <a href="http://www.w3.org/TR/REC-xml">
-      http://www.w3.org/TR/REC-xml</a> for information
-      about this namespace.
-     </p>
-     <p>
-      Note that local names in this namespace are intended to be
-      defined only by the World Wide Web Consortium or its subgroups.
-      The names currently defined in this namespace are listed below.
-      They should not be used with conflicting semantics by any Working
-      Group, specification, or document instance.
-     </p>
-     <p>
-      See further below in this document for more information about <a
-      href="#usage">how to refer to this schema document from your own
-      XSD schema documents</a> and about <a href="#nsversioning">the
-      namespace-versioning policy governing this schema document</a>.
-     </p>
-    </div>
-   </div>
-  </xs:documentation>
- </xs:annotation>
-
- <xs:attribute name="lang">
-  <xs:annotation>
-   <xs:documentation>
-    <div>
-
-      <h3>lang (as an attribute name)</h3>
-      <p>
-       denotes an attribute whose value
-       is a language code for the natural language of the content of
-       any element; its value is inherited.  This name is reserved
-       by virtue of its definition in the XML specification.</p>
-
-    </div>
-    <div>
-     <h4>Notes</h4>
-     <p>
-      Attempting to install the relevant ISO 2- and 3-letter
-      codes as the enumerated possible values is probably never
-      going to be a realistic possibility.
-     </p>
-     <p>
-      See BCP 47 at <a href="http://www.rfc-editor.org/rfc/bcp/bcp47.txt">
-       http://www.rfc-editor.org/rfc/bcp/bcp47.txt</a>
-      and the IANA language subtag registry at
-      <a href="http://www.iana.org/assignments/language-subtag-registry">
-       http://www.iana.org/assignments/language-subtag-registry</a>
-      for further information.
-     </p>
-     <p>
-      The union allows for the 'un-declaration' of xml:lang with
-      the empty string.
-     </p>
-    </div>
-   </xs:documentation>
-  </xs:annotation>
-  <xs:simpleType>
-   <xs:union memberTypes="xs:language">
-    <xs:simpleType>
-     <xs:restriction base="xs:string">
-      <xs:enumeration value=""/>
-     </xs:restriction>
-    </xs:simpleType>
-   </xs:union>
-  </xs:simpleType>
- </xs:attribute>
-
- <xs:attribute name="space">
-  <xs:annotation>
-   <xs:documentation>
-    <div>
-
-      <h3>space (as an attribute name)</h3>
-      <p>
-       denotes an attribute whose
-       value is a keyword indicating what whitespace processing
-       discipline is intended for the content of the element; its
-       value is inherited.  This name is reserved by virtue of its
-       definition in the XML specification.</p>
-
-    </div>
-   </xs:documentation>
-  </xs:annotation>
-  <xs:simpleType>
-   <xs:restriction base="xs:NCName">
-    <xs:enumeration value="default"/>
-    <xs:enumeration value="preserve"/>
-   </xs:restriction>
-  </xs:simpleType>
- </xs:attribute>
-
- <xs:attribute name="base" type="xs:anyURI"> <xs:annotation>
-   <xs:documentation>
-    <div>
-
-      <h3>base (as an attribute name)</h3>
-      <p>
-       denotes an attribute whose value
-       provides a URI to be used as the base for interpreting any
-       relative URIs in the scope of the element on which it
-       appears; its value is inherited.  This name is reserved
-       by virtue of its definition in the XML Base specification.</p>
-
-     <p>
-      See <a
-      href="http://www.w3.org/TR/xmlbase/">http://www.w3.org/TR/xmlbase/</a>
-      for information about this attribute.
-     </p>
-    </div>
-   </xs:documentation>
-  </xs:annotation>
- </xs:attribute>
-
- <xs:attribute name="id" type="xs:ID">
-  <xs:annotation>
-   <xs:documentation>
-    <div>
-
-      <h3>id (as an attribute name)</h3>
-      <p>
-       denotes an attribute whose value
-       should be interpreted as if declared to be of type ID.
-       This name is reserved by virtue of its definition in the
-       xml:id specification.</p>
-
-     <p>
-      See <a
-      href="http://www.w3.org/TR/xml-id/">http://www.w3.org/TR/xml-id/</a>
-      for information about this attribute.
-     </p>
-    </div>
-   </xs:documentation>
-  </xs:annotation>
- </xs:attribute>
-
- <xs:attributeGroup name="specialAttrs">
-  <xs:attribute ref="xml:base"/>
-  <xs:attribute ref="xml:lang"/>
-  <xs:attribute ref="xml:space"/>
-  <xs:attribute ref="xml:id"/>
- </xs:attributeGroup>
-
- <xs:annotation>
-  <xs:documentation>
-   <div>
-
-    <h3>Father (in any context at all)</h3>
-
-    <div class="bodytext">
-     <p>
-      denotes Jon Bosak, the chair of
-      the original XML Working Group.  This name is reserved by
-      the following decision of the W3C XML Plenary and
-      XML Coordination groups:
-     </p>
-     <blockquote>
-       <p>
-	In appreciation for his vision, leadership and
-	dedication the W3C XML Plenary on this 10th day of
-	February, 2000, reserves for Jon Bosak in perpetuity
-	the XML name "xml:Father".
-       </p>
-     </blockquote>
-    </div>
-   </div>
-  </xs:documentation>
- </xs:annotation>
-
- <xs:annotation>
-  <xs:documentation>
-   <div xml:id="usage" id="usage">
-    <h2><a name="usage">About this schema document</a></h2>
-
-    <div class="bodytext">
-     <p>
-      This schema defines attributes and an attribute group suitable
-      for use by schemas wishing to allow <code>xml:base</code>,
-      <code>xml:lang</code>, <code>xml:space</code> or
-      <code>xml:id</code> attributes on elements they define.
-     </p>
-     <p>
-      To enable this, such a schema must import this schema for
-      the XML namespace, e.g. as follows:
-     </p>
-     <pre>
-          &lt;schema . . .>
-           . . .
-           &lt;import namespace="http://www.w3.org/XML/1998/namespace"
-                      schemaLocation="http://www.w3.org/2001/xml.xsd"/>
-     </pre>
-     <p>
-      or
-     </p>
-     <pre>
-           &lt;import namespace="http://www.w3.org/XML/1998/namespace"
-                      schemaLocation="http://www.w3.org/2009/01/xml.xsd"/>
-     </pre>
-     <p>
-      Subsequently, qualified reference to any of the attributes or the
-      group defined below will have the desired effect, e.g.
-     </p>
-     <pre>
-          &lt;type . . .>
-           . . .
-           &lt;attributeGroup ref="xml:specialAttrs"/>
-     </pre>
-     <p>
-      will define a type which will schema-validate an instance element
-      with any of those attributes.
-     </p>
-    </div>
-   </div>
-  </xs:documentation>
- </xs:annotation>
-
- <xs:annotation>
-  <xs:documentation>
-   <div id="nsversioning" xml:id="nsversioning">
-    <h2><a name="nsversioning">Versioning policy for this schema document</a></h2>
-    <div class="bodytext">
-     <p>
-      In keeping with the XML Schema WG's standard versioning
-      policy, this schema document will persist at
-      <a href="http://www.w3.org/2009/01/xml.xsd">
-       http://www.w3.org/2009/01/xml.xsd</a>.
-     </p>
-     <p>
-      At the date of issue it can also be found at
-      <a href="http://www.w3.org/2001/xml.xsd">
-       http://www.w3.org/2001/xml.xsd</a>.
-     </p>
-     <p>
-      The schema document at that URI may however change in the future,
-      in order to remain compatible with the latest version of XML
-      Schema itself, or with the XML namespace itself.  In other words,
-      if the XML Schema or XML namespaces change, the version of this
-      document at <a href="http://www.w3.org/2001/xml.xsd">
-       http://www.w3.org/2001/xml.xsd
-      </a>
-      will change accordingly; the version at
-      <a href="http://www.w3.org/2009/01/xml.xsd">
-       http://www.w3.org/2009/01/xml.xsd
-      </a>
-      will not change.
-     </p>
-     <p>
-      Previous dated (and unchanging) versions of this schema
-      document are at:
-     </p>
-     <ul>
-      <li><a href="http://www.w3.org/2009/01/xml.xsd">
-	http://www.w3.org/2009/01/xml.xsd</a></li>
-      <li><a href="http://www.w3.org/2007/08/xml.xsd">
-	http://www.w3.org/2007/08/xml.xsd</a></li>
-      <li><a href="http://www.w3.org/2004/10/xml.xsd">
-	http://www.w3.org/2004/10/xml.xsd</a></li>
-      <li><a href="http://www.w3.org/2001/03/xml.xsd">
-	http://www.w3.org/2001/03/xml.xsd</a></li>
-     </ul>
-    </div>
-   </div>
-  </xs:documentation>
- </xs:annotation>
-
-</xs:schema>
-

vmware-tools/vgauth/schemas/xmldsig-core-schema.xsd

@@ -1,308 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE schema PUBLIC "-//W3C//DTD XMLSchema 200102//EN" "XMLSchema.dtd" [
-   <!ATTLIST schema
-     xmlns:ds CDATA #FIXED "http://www.w3.org/2000/09/xmldsig#">
-   <!ENTITY dsig 'http://www.w3.org/2000/09/xmldsig#'>
-   <!ENTITY % p ''>
-   <!ENTITY % s ''>
-  ]>
-<!-- Schema for XML Signatures
-    http://www.w3.org/2000/09/xmldsig#
-    $Revision: 1.1 $ on $Date: 2002/02/08 20:32:26 $ by $Author: reagle $
-
-    Copyright 2001 The Internet Society and W3C (Massachusetts Institute
-    of Technology, Institut National de Recherche en Informatique et en
-    Automatique, Keio University). All Rights Reserved.
-    http://www.w3.org/Consortium/Legal/
-
-    This document is governed by the W3C Software License [1] as described
-    in the FAQ [2].
-
-    [1] http://www.w3.org/Consortium/Legal/copyright-software-19980720
-    [2] http://www.w3.org/Consortium/Legal/IPR-FAQ-20000620.html#DTD
--->
-<schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:ds="http://www.w3.org/2000/09/xmldsig#" targetNamespace="http://www.w3.org/2000/09/xmldsig#" version="0.1" elementFormDefault="qualified">
-
-<!-- Basic Types Defined for Signatures -->
-
-<simpleType name="CryptoBinary">
-  <restriction base="base64Binary">
-  </restriction>
-</simpleType>
-
-<!-- Start Signature -->
-
-<element name="Signature" type="ds:SignatureType"/>
-<complexType name="SignatureType">
-  <sequence>
-    <element ref="ds:SignedInfo"/>
-    <element ref="ds:SignatureValue"/>
-    <element ref="ds:KeyInfo" minOccurs="0"/>
-    <element ref="ds:Object" minOccurs="0" maxOccurs="unbounded"/>
-  </sequence>
-  <attribute name="Id" type="ID" use="optional"/>
-</complexType>
-
-  <element name="SignatureValue" type="ds:SignatureValueType"/>
-  <complexType name="SignatureValueType">
-    <simpleContent>
-      <extension base="base64Binary">
-        <attribute name="Id" type="ID" use="optional"/>
-      </extension>
-    </simpleContent>
-  </complexType>
-
-<!-- Start SignedInfo -->
-
-<element name="SignedInfo" type="ds:SignedInfoType"/>
-<complexType name="SignedInfoType">
-  <sequence>
-    <element ref="ds:CanonicalizationMethod"/>
-    <element ref="ds:SignatureMethod"/>
-    <element ref="ds:Reference" maxOccurs="unbounded"/>
-  </sequence>
-  <attribute name="Id" type="ID" use="optional"/>
-</complexType>
-
-  <element name="CanonicalizationMethod" type="ds:CanonicalizationMethodType"/>
-  <complexType name="CanonicalizationMethodType" mixed="true">
-    <sequence>
-      <any namespace="##any" minOccurs="0" maxOccurs="unbounded"/>
-      <!-- (0,unbounded) elements from (1,1) namespace -->
-    </sequence>
-    <attribute name="Algorithm" type="anyURI" use="required"/>
-  </complexType>
-
-  <element name="SignatureMethod" type="ds:SignatureMethodType"/>
-  <complexType name="SignatureMethodType" mixed="true">
-    <sequence>
-      <element name="HMACOutputLength" minOccurs="0" type="ds:HMACOutputLengthType"/>
-      <any namespace="##other" minOccurs="0" maxOccurs="unbounded"/>
-      <!-- (0,unbounded) elements from (1,1) external namespace -->
-    </sequence>
-    <attribute name="Algorithm" type="anyURI" use="required"/>
-  </complexType>
-
-<!-- Start Reference -->
-
-<element name="Reference" type="ds:ReferenceType"/>
-<complexType name="ReferenceType">
-  <sequence>
-    <element ref="ds:Transforms" minOccurs="0"/>
-    <element ref="ds:DigestMethod"/>
-    <element ref="ds:DigestValue"/>
-  </sequence>
-  <attribute name="Id" type="ID" use="optional"/>
-  <attribute name="URI" type="anyURI" use="optional"/>
-  <attribute name="Type" type="anyURI" use="optional"/>
-</complexType>
-
-  <element name="Transforms" type="ds:TransformsType"/>
-  <complexType name="TransformsType">
-    <sequence>
-      <element ref="ds:Transform" maxOccurs="unbounded"/>
-    </sequence>
-  </complexType>
-
-  <element name="Transform" type="ds:TransformType"/>
-  <complexType name="TransformType" mixed="true">
-    <choice minOccurs="0" maxOccurs="unbounded">
-      <any namespace="##other" processContents="lax"/>
-      <!-- (1,1) elements from (0,unbounded) namespaces -->
-      <element name="XPath" type="string"/>
-    </choice>
-    <attribute name="Algorithm" type="anyURI" use="required"/>
-  </complexType>
-
-<!-- End Reference -->
-
-<element name="DigestMethod" type="ds:DigestMethodType"/>
-<complexType name="DigestMethodType" mixed="true">
-  <sequence>
-    <any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
-  </sequence>
-  <attribute name="Algorithm" type="anyURI" use="required"/>
-</complexType>
-
-<element name="DigestValue" type="ds:DigestValueType"/>
-<simpleType name="DigestValueType">
-  <restriction base="base64Binary"/>
-</simpleType>
-
-<!-- End SignedInfo -->
-
-<!-- Start KeyInfo -->
-
-<element name="KeyInfo" type="ds:KeyInfoType"/>
-<complexType name="KeyInfoType" mixed="true">
-  <choice maxOccurs="unbounded">
-    <element ref="ds:KeyName"/>
-    <element ref="ds:KeyValue"/>
-    <element ref="ds:RetrievalMethod"/>
-    <element ref="ds:X509Data"/>
-    <element ref="ds:PGPData"/>
-    <element ref="ds:SPKIData"/>
-    <element ref="ds:MgmtData"/>
-    <any processContents="lax" namespace="##other"/>
-    <!-- (1,1) elements from (0,unbounded) namespaces -->
-  </choice>
-  <attribute name="Id" type="ID" use="optional"/>
-</complexType>
-
-  <element name="KeyName" type="string"/>
-  <element name="MgmtData" type="string"/>
-
-  <element name="KeyValue" type="ds:KeyValueType"/>
-  <complexType name="KeyValueType" mixed="true">
-   <choice>
-     <element ref="ds:DSAKeyValue"/>
-     <element ref="ds:RSAKeyValue"/>
-     <any namespace="##other" processContents="lax"/>
-   </choice>
-  </complexType>
-
-  <element name="RetrievalMethod" type="ds:RetrievalMethodType"/>
-  <complexType name="RetrievalMethodType">
-    <sequence>
-      <element ref="ds:Transforms" minOccurs="0"/>
-    </sequence>
-    <attribute name="URI" type="anyURI"/>
-    <attribute name="Type" type="anyURI" use="optional"/>
-  </complexType>
-
-<!-- Start X509Data -->
-
-<element name="X509Data" type="ds:X509DataType"/>
-<complexType name="X509DataType">
-  <sequence maxOccurs="unbounded">
-    <choice>
-      <element name="X509IssuerSerial" type="ds:X509IssuerSerialType"/>
-      <element name="X509SKI" type="base64Binary"/>
-      <element name="X509SubjectName" type="string"/>
-      <element name="X509Certificate" type="base64Binary"/>
-      <element name="X509CRL" type="base64Binary"/>
-      <any namespace="##other" processContents="lax"/>
-    </choice>
-  </sequence>
-</complexType>
-
-<complexType name="X509IssuerSerialType">
-  <sequence>
-    <element name="X509IssuerName" type="string"/>
-    <element name="X509SerialNumber" type="integer"/>
-  </sequence>
-</complexType>
-
-<!-- End X509Data -->
-
-<!-- Begin PGPData -->
-
-<element name="PGPData" type="ds:PGPDataType"/>
-<complexType name="PGPDataType">
-  <choice>
-    <sequence>
-      <element name="PGPKeyID" type="base64Binary"/>
-      <element name="PGPKeyPacket" type="base64Binary" minOccurs="0"/>
-      <any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
-    </sequence>
-    <sequence>
-      <element name="PGPKeyPacket" type="base64Binary"/>
-      <any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
-    </sequence>
-  </choice>
-</complexType>
-
-<!-- End PGPData -->
-
-<!-- Begin SPKIData -->
-
-<element name="SPKIData" type="ds:SPKIDataType"/>
-<complexType name="SPKIDataType">
-  <sequence maxOccurs="unbounded">
-    <element name="SPKISexp" type="base64Binary"/>
-    <any namespace="##other" processContents="lax" minOccurs="0"/>
-  </sequence>
-</complexType>
-
-<!-- End SPKIData -->
-
-<!-- End KeyInfo -->
-
-<!-- Start Object (Manifest, SignatureProperty) -->
-
-<element name="Object" type="ds:ObjectType"/>
-<complexType name="ObjectType" mixed="true">
-  <sequence minOccurs="0" maxOccurs="unbounded">
-    <any namespace="##any" processContents="lax"/>
-  </sequence>
-  <attribute name="Id" type="ID" use="optional"/>
-  <attribute name="MimeType" type="string" use="optional"/> <!-- add a grep facet -->
-  <attribute name="Encoding" type="anyURI" use="optional"/>
-</complexType>
-
-<element name="Manifest" type="ds:ManifestType"/>
-<complexType name="ManifestType">
-  <sequence>
-    <element ref="ds:Reference" maxOccurs="unbounded"/>
-  </sequence>
-  <attribute name="Id" type="ID" use="optional"/>
-</complexType>
-
-<element name="SignatureProperties" type="ds:SignaturePropertiesType"/>
-<complexType name="SignaturePropertiesType">
-  <sequence>
-    <element ref="ds:SignatureProperty" maxOccurs="unbounded"/>
-  </sequence>
-  <attribute name="Id" type="ID" use="optional"/>
-</complexType>
-
-   <element name="SignatureProperty" type="ds:SignaturePropertyType"/>
-   <complexType name="SignaturePropertyType" mixed="true">
-     <choice maxOccurs="unbounded">
-       <any namespace="##other" processContents="lax"/>
-       <!-- (1,1) elements from (1,unbounded) namespaces -->
-     </choice>
-     <attribute name="Target" type="anyURI" use="required"/>
-     <attribute name="Id" type="ID" use="optional"/>
-   </complexType>
-
-<!-- End Object (Manifest, SignatureProperty) -->
-
-<!-- Start Algorithm Parameters -->
-
-<simpleType name="HMACOutputLengthType">
-  <restriction base="integer"/>
-</simpleType>
-
-<!-- Start KeyValue Element-types -->
-
-<element name="DSAKeyValue" type="ds:DSAKeyValueType"/>
-<complexType name="DSAKeyValueType">
-  <sequence>
-    <sequence minOccurs="0">
-      <element name="P" type="ds:CryptoBinary"/>
-      <element name="Q" type="ds:CryptoBinary"/>
-    </sequence>
-    <element name="G" type="ds:CryptoBinary" minOccurs="0"/>
-    <element name="Y" type="ds:CryptoBinary"/>
-    <element name="J" type="ds:CryptoBinary" minOccurs="0"/>
-    <sequence minOccurs="0">
-      <element name="Seed" type="ds:CryptoBinary"/>
-      <element name="PgenCounter" type="ds:CryptoBinary"/>
-    </sequence>
-  </sequence>
-</complexType>
-
-<element name="RSAKeyValue" type="ds:RSAKeyValueType"/>
-<complexType name="RSAKeyValueType">
-  <sequence>
-    <element name="Modulus" type="ds:CryptoBinary"/>
-    <element name="Exponent" type="ds:CryptoBinary"/>
-  </sequence>
-</complexType>
-
-<!-- End KeyValue Element-types -->
-
-<!-- End Signature -->
-
-</schema>