Initial commit.

sysconfig/network-scripts/ifcfg-eth0

@@ -0,0 +1,7 @@
+DEVICE=eth0
+BOOTPROTO=static
+NM_CONTROLLED=no
+TYPE=Ethernet
+ONBOOT=yes
+NETMASK=255.255.255.0
+IPADDR=192.168.1.2

sysconfig/network-scripts/ifcfg-lo

@@ -0,0 +1,9 @@
+DEVICE=lo
+IPADDR=127.0.0.1
+NETMASK=255.0.0.0
+NETWORK=127.0.0.0
+# If you're having problems with gated making 127.0.0.0/8 a martian,
+# you can change this to something else (255.255.255.255, for example)
+BROADCAST=127.255.255.255
+ONBOOT=yes
+NAME=loopback

sysconfig/network-scripts/ifdown

@@ -0,0 +1,77 @@
+#!/bin/bash
+
+unset WINDOW # defined by screen, conflicts with our usage
+
+. /etc/init.d/functions
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+[ -f ../network ] && . ../network
+
+CONFIG=$1
+
+[ -z "$CONFIG" ] && {
+    echo $"usage: ifdown <configuration>" >&2
+    exit 1
+}
+
+if ! [ -f /etc/sysconfig/disable-deprecation-warnings ] && ! is_true ${DEPRECATION_WARNING_ISSUED}; then
+    net_log $"You are using 'ifdown' script provided by 'network-scripts', which are now deprecated." warning ifdown >&2
+    net_log $"'network-scripts' will be removed in one of the next major releases of RHEL." warning ifdown >&2
+    net_log $"It is advised to switch to 'NetworkManager' instead - it provides 'ifup/ifdown' scripts as well." warning ifdown >&2
+fi
+
+need_config "${CONFIG}"
+
+[ -f "$CONFIG" ] || {
+    echo $"usage: ifdown <configuration>" >&2
+    exit 1
+}
+
+if [ $UID != 0 ]; then
+    if [ -x /usr/sbin/usernetctl ]; then
+        source_config
+        if /usr/sbin/usernetctl ${CONFIG} report ; then
+            exec /usr/sbin/usernetctl ${CONFIG} down
+        fi
+    fi
+    echo $"Users cannot control this device." >&2
+    exit 1
+fi
+
+source_config
+
+if [ -n "$IN_HOTPLUG" ] && [ "${HOTPLUG}" = "no" -o "${HOTPLUG}" = "NO" ]
+then
+    exit 0
+fi
+
+if [ "$_use_nm" = "true" ]; then
+    if [ -n "$UUID" -a -z "$DEVICE" ]; then
+        DEVICE=$(nmcli -t --fields uuid,device con show --active | awk -F ':' "\$1 == \"$UUID\" { print \$2 }")
+    fi
+    if [ -n "$DEVICE" ] && ! is_nm_device_unmanaged "$DEVICE" ; then
+        if ! LC_ALL=C nmcli -t -f STATE,DEVICE dev status | grep -Eq "^(failed|disconnected|unmanaged|unavailable):$DEVICE$"; then
+            nmcli dev disconnect "$DEVICE"
+            exit $?
+        fi
+        exit 0
+    fi
+fi
+
+if [ -x /sbin/ifdown-pre-local ]; then
+    /sbin/ifdown-pre-local ${DEVICE}
+fi
+
+OTHERSCRIPT="/etc/sysconfig/network-scripts/ifdown-${DEVICETYPE}"
+
+if [ ! -x ${OTHERSCRIPT} ]; then
+    OTHERSCRIPT="/etc/sysconfig/network-scripts/ifdown-${TYPE}"
+fi
+
+if [ ! -x ${OTHERSCRIPT} ]; then
+    OTHERSCRIPT="/etc/sysconfig/network-scripts/ifdown-eth"
+fi
+
+exec ${OTHERSCRIPT} ${CONFIG} $2

sysconfig/network-scripts/ifdown-Team

@@ -0,0 +1,49 @@
+#!/bin/sh
+
+# Copyright (C) 2012-2015 Jiri Pirko <jiri@resnulli.us>
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+. /etc/init.d/functions
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+[ -f ../network ] && . ../network
+
+CONFIG=${1}
+
+need_config "${CONFIG}"
+
+source_config
+
+if [ "${DEVICETYPE}" = "Team" ]; then
+	# This means that this was called directly, not via ifdown-eth
+	# so execute ifdown-eth now.
+	/etc/sysconfig/network-scripts/ifdown-eth ${CONFIG} $2
+fi
+
+if [ -n "${TEAM_CONFIG}" ]; then
+	if [ ! -x /usr/bin/teamd ]; then
+		net_log $"Team support not available: teamd not found"
+		exit 1
+	fi
+	# Bring down all existing port devices now
+	for device in $(LANG=C egrep -l "^[[:space:]]*TEAM_MASTER=\"?${DEVICE}\"?" /etc/sysconfig/network-scripts/ifcfg-*) ; do
+		is_ignored_file "$device" && continue
+		/sbin/ifdown ${device##*/}
+	done
+	/usr/bin/systemctl stop teamd@${DEVICE}.service --ignore-dependencies || exit 1
+fi

sysconfig/network-scripts/ifdown-TeamPort

@@ -0,0 +1,49 @@
+#!/bin/sh
+
+# Copyright (C) 2012-2015 Jiri Pirko <jiri@resnulli.us>
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+. /etc/init.d/functions
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+[ -f ../network ] && . ../network
+
+CONFIG=${1}
+
+need_config "${CONFIG}"
+
+source_config
+
+if [ -n "${TEAM_MASTER}" ]; then
+	if [ ! -x /usr/bin/teamdctl ]; then
+		net_log $"Team support not available: teamdctl not found"
+		exit 1
+	fi
+	/sbin/ip link show ${TEAM_MASTER} > /dev/null 2>&1
+	if [ $? -ne 0 ]; then
+		net_log $"Team master is not present, skipping port device removal from master" info
+		exit 0
+	fi
+	/usr/bin/teamdctl ${TEAM_MASTER} port remove ${DEVICE} || exit 1
+fi
+
+if [ "${DEVICETYPE}" = "TeamPort" ]; then
+	# This means that this was called directly, not via ifdown-eth
+	# so execute ifdown-eth now.
+	exec /etc/sysconfig/network-scripts/ifdown-eth ${CONFIG} $2
+fi

sysconfig/network-scripts/ifdown-bnep

@@ -0,0 +1,49 @@
+#! /bin/bash
+
+. /etc/init.d/functions
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+[ -f ../network ] && . ../network
+
+CONFIG=${1}
+
+source_config
+
+# On hotplug events, just bring the virtual device up as if it's normal Ethernet
+if [ -n "$IN_HOTPLUG" ]; then
+    exec /etc/sysconfig/network-scripts/ifdown-eth ${CONFIG} $2
+fi
+
+stop_panu()
+{
+    kill -TERM $(cat /run/pand-${DEVICE}.pid)
+}
+
+stop_nap()
+{
+    kill -TERM $(cat /run/pand-${DEVICE}.pid)
+    /usr/bin/pand -K
+}
+
+stop_gn()
+{
+    :
+}
+
+case "$ROLE" in
+PANU)
+    stop_panu
+    ;;
+NAP)
+    stop_nap
+    ;;
+GN)
+    stop_gn
+    ;;
+*)
+    echo Unknown BNEP mode :$ROLE
+    ;;
+esac
+

sysconfig/network-scripts/ifdown-eth

@@ -0,0 +1,183 @@
+#!/bin/bash
+# Network Interface Configuration System
+# Copyright (c) 1996-2009 Red Hat, Inc. all rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License, version 2,
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+. /etc/init.d/functions
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+[ -f ../network ] && . ../network
+
+CONFIG=${1}
+
+source_config
+
+. /etc/sysconfig/network
+
+# Check to make sure the device is actually up
+check_device_down ${DEVICE} && [ "$BOOTPROTO" != "dhcp" -a "$BOOTPROTO" != "bootp" ] && [ -n "$VLAN" -a "$VLAN" != "yes" ] && exit 0
+
+if [ -n "${TEAM_MASTER}" ] && [ ! "${DEVICETYPE}" = "TeamPort" ] && [ -x ./ifdown-TeamPort ]; then
+    ./ifdown-TeamPort ${CONFIG} $2
+fi
+
+if [ "${SLAVE}" != "yes" -o -z "${MASTER}" ]; then
+    if [ -n "${HWADDR}" -a -z "${MACADDR}" ]; then
+        FOUNDMACADDR=$(get_hwaddr ${REALDEVICE})
+        if [ -n "${FOUNDMACADDR}" -a "${FOUNDMACADDR}" != "${HWADDR}" ]; then
+            NEWCONFIG=$(get_config_by_hwaddr ${FOUNDMACADDR})
+            if [ -n "${NEWCONFIG}" ]; then
+                eval $(LANG=C grep -F "DEVICE=" $NEWCONFIG)
+            else
+                net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring."
+                exit 1
+            fi
+            if [ -n "${NEWCONFIG}" -a "${NEWCONFIG##*/}" != "${CONFIG##*/}" -a "${DEVICE}" = "${REALDEVICE}" ]; then
+                exec /sbin/ifdown ${NEWCONFIG}
+            else
+                net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring."
+                exit 1
+            fi
+        fi
+    fi
+fi
+
+if is_bonding_device ${DEVICE} ; then
+    for device in $(LANG=C grep -l "^[[:space:]]*MASTER=['\"]\?${DEVICE}['\"]\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-*) ; do
+        is_ignored_file "$device" && continue
+        /sbin/ifdown ${device##*/}
+    done
+    for arg in $BONDING_OPTS ; do
+        key=${arg%%=*};
+        [[ "${key}" != "arp_ip_target" ]] && continue
+        value=${arg##*=};
+        if [ "${value:0:1}" != "" ]; then
+            OLDIFS=$IFS;
+            IFS=',';
+            for arp_ip in $value; do
+                if grep -q $arp_ip /sys/class/net/${DEVICE}/bonding/arp_ip_target; then
+                    echo "-$arp_ip" > /sys/class/net/${DEVICE}/bonding/arp_ip_target
+                fi
+            done
+            IFS=$OLDIFS;
+        else
+            value=${value#+};
+            if grep -q $value /sys/class/net/${DEVICE}/bonding/arp_ip_target; then
+                echo "-$value" > /sys/class/net/${DEVICE}/bonding/arp_ip_target
+            fi
+        fi
+    done
+fi
+
+/etc/sysconfig/network-scripts/ifdown-ipv6 ${CONFIG}
+
+retcode=0
+
+for VER in "" 6 ; do
+    if [ -f "/run/dhclient$VER-${DEVICE}.pid" ]; then
+        dhcpid=$(cat /run/dhclient$VER-${DEVICE}.pid)
+        generate_lease_file_name $VER
+        if is_true "$DHCPRELEASE";  then
+            /sbin/dhclient -r -lf ${LEASEFILE} -pf /run/dhclient$VER-${DEVICE}.pid ${DEVICE} >/dev/null 2>&1
+            retcode=$?
+        else
+            kill $dhcpid >/dev/null 2>&1
+            retcode=$?
+            reason=STOP$VER interface=${DEVICE} /sbin/dhclient-script
+        fi
+        if [ -f "/run/dhclient$VER-${DEVICE}.pid" ]; then
+            rm -f /run/dhclient$VER-${DEVICE}.pid
+            kill $dhcpid >/dev/null 2>&1
+        fi  
+    fi
+done
+
+# we can't just delete the configured address because that address
+# may have been changed in the config file since the device was
+# brought up.  Flush all addresses associated with this
+# instance instead.
+if [ -d "/sys/class/net/${REALDEVICE}" ]; then
+    LABEL=
+    if [ "${REALDEVICE}" != "${DEVICE}" ]; then
+        LABEL="label ${DEVICE}"
+    fi
+    if [ "${REALDEVICE}" = "lo" ]; then
+        TIMEOUT=""
+        [ -x /usr/bin/timeout ] && TIMEOUT="/usr/bin/timeout --signal=SIGQUIT 4"
+        $TIMEOUT ip addr flush dev ${REALDEVICE} ${LABEL} scope global 2>/dev/null
+        $TIMEOUT ip addr flush dev ${REALDEVICE} ${LABEL} scope host 2>/dev/null
+    else
+        ip addr flush dev ${REALDEVICE} ${LABEL} scope global 2>/dev/null
+        ip -4 addr flush dev ${REALDEVICE} ${LABEL} scope host 2>/dev/null
+    fi
+
+    if [ "${SLAVE}" = "yes" -a -n "${MASTER}" ]; then
+        echo "-${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null
+    fi
+
+    if [ "${REALDEVICE}" = "${DEVICE}" ]; then
+        ip link set dev ${DEVICE} down 2>/dev/null
+    fi
+fi
+[ "$retcode" = "0" ] && retcode=$?
+
+if [ -n "${BRIDGE}" ]; then
+    ip link set dev ${DEVICE} nomaster down
+    # Upon removing a device from a bridge,
+    # it's necessary to make radvd reload its config
+    [ -r /run/radvd/radvd.pid ] && kill -HUP $(cat /run/radvd/radvd.pid)
+    if [ -d /sys/class/net/${BRIDGE}/brif ] && [ $(ls -1 /sys/class/net/${BRIDGE}/brif | wc -l) -eq 0 ]; then
+        ip link del ${BRIDGE}
+    fi
+fi
+
+if [ "${TYPE}" = "Tap" ]; then
+    TUNMODE="mode tap"
+    [[ ${DEVICE} == tun* ]] && TUNMODE="mode tun"
+    ip tuntap del ${TUNMODE} dev ${DEVICE} >/dev/null
+fi
+
+if [ -n "${TEAM_CONFIG}" ] && [ ! "${DEVICETYPE}" = "Team" ] && [ -x ./ifdown-Team ]; then
+    ./ifdown-Team ${CONFIG} $2
+fi
+
+# wait up to 5 seconds for device to actually come down...
+waited=0
+while ! check_device_down ${DEVICE} && [ "$waited" -lt 50 ] ; do
+    sleep 0.01
+    waited=$(($waited+1))
+done
+
+# don't leave an outdated key sitting around
+if [ -n "${WIRELESS_ENC_KEY}" ] && [ -x /sbin/iwconfig ]; then
+    /sbin/iwconfig ${DEVICE} enc 0 >/dev/null 2>&1
+fi
+
+if [ "$retcode" = 0 ] ; then
+    /etc/sysconfig/network-scripts/ifdown-post $CONFIG
+    # do NOT use $? because ifdown should return whether or not
+    # the interface went down.
+fi
+
+if [ -n "$VLAN" ]; then
+    # 802.1q VLAN
+    if [ -f /proc/net/vlan/${DEVICE} ]; then
+        ip link delete ${DEVICE} type vlan
+    fi
+fi
+
+exit $retcode

sysconfig/network-scripts/ifdown-ippp

@@ -0,0 +1,34 @@
+#! /bin/sh
+
+PATH=/sbin:/usr/sbin:/bin:/usr/bin 
+
+# Get global network configuration
+[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
+
+CONFIG=$1
+
+. ./$CONFIG
+
+# stopping ibod daemon for channel bundling
+if [ -f /var/lock/subsys/ibod ] ; then
+    kill -9  $(pidof ibod) >/dev/null 2>&1
+    rm -f /var/lock/subsys/ibod
+fi
+
+# Shut down IPv6
+/etc/sysconfig/network-scripts/ifdown-ipv6 $CONFIG
+
+# shutdown isdn device
+isdnctrl hangup $DEVICE >/dev/null 2>&1
+sleep 1
+ip link set dev $DEVICE down >/dev/null 2>&1
+
+# delete isdn device
+isdnctrl delif $DEVICE >/dev/null 2>&1
+
+# kill ipppd daemon
+if [ -f /run/ipppd.$DEVICE.pid ] ; then
+    pppdpid=$(cat /run/ipppd.$DEVICE.pid)
+    kill -9 $pppdpid > /dev/null 2>&1
+    rm -f /run/ipppd.$DEVICE.pid > /dev/null 2>&1
+fi

sysconfig/network-scripts/ifdown-ipv6

@@ -0,0 +1,139 @@
+#!/bin/sh
+#
+# ifdown-ipv6
+#
+#
+# Taken from:
+# (P) & (C) 2000-2004 by Peter Bieringer <pb@bieringer.de>
+#
+#  You will find more information on the initscripts-ipv6 homepage at
+#   http://www.deepspace6.net/projects/initscripts-ipv6.html
+#
+# RHL integration assistance by Pekka Savola <pekkas@netcore.fi>
+#
+# Version 2005-09-22
+#
+# Note: if called as (like normally) by /etc/sysconfig/network-scripts/ifdown
+#        exit codes aren't handled by "ifdown"
+#
+# Uses following information from /etc/sysconfig/network-scripts/ifcfg-$1:
+#  DEVICE=<device>
+#  IPV6INIT=yes|no: controls IPv6 configuration for this interface
+#
+# Optional for 6to4 tunneling:
+#  IPV6TO4_RELAY=<IPv4 address>: IPv4 address of the remote 6to4 relay [default: 192.88.99.1]
+#  IPV6TO4_ROUTING="<device>-<suffix>/<prefix length> ...": information to setup internal interfaces
+#
+# Optional for 6to4 tunneling links to trigger radvd:
+#  IPV6_CONTROL_RADVD=yes|no: controls radvd triggering [optional]
+#  IPV6_RADVD_PIDFILE=<file>: PID file of radvd for sending signals, default is "/run/radvd/radvd.pid" [optional]
+#  IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd [optional, default is SIGHUP]
+#
+#  Required version of radvd to use 6to4 prefix recalculation
+#   0.6.2p3 or newer supporting option "Base6to4Interface"
+#  Required version of radvd to use dynamic ppp links
+#   0.7.0 + fixes or newer
+#
+
+
+. /etc/sysconfig/network
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+CONFIG=$1
+[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
+source_config
+
+REALDEVICE=${DEVICE%%:*}
+DEVICE=$REALDEVICE
+
+[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1
+. /etc/sysconfig/network-scripts/network-functions-ipv6
+
+
+# IPv6 test, no module loaded, exit if system is not IPv6-ready
+ipv6_test testonly || exit 0
+
+# Test device status
+ipv6_test_device_status $DEVICE
+if [ $? != 0 -a $? != 11 ]; then
+    # device doesn't exist or other problem occurs
+    exit 1
+fi
+
+if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then
+    # Switch some sysctls to secure mode
+    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=0 >/dev/null 2>&1
+    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=0 >/dev/null 2>&1
+    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=0 >/dev/null 2>&1
+fi
+/sbin/ip link set $DEVICE addrgenmode eui64 >/dev/null 2>&1
+
+# Test status of tun6to4 device
+ipv6_test_device_status tun6to4
+if [ $? = 0 -o $? = 11 ]; then
+    # Device exists
+    valid6to4config="yes"
+
+    if [ -z "$IPV6TO4_RELAY" ]; then
+        IPV6TO4_RELAY="192.88.99.1"
+    fi
+
+    # Get IPv4 address from interface
+    if [ -n "$IPV6TO4_IPV4ADDR" ]; then
+        # Take special configured from config file (precedence 1)
+        ipv4addr="$IPV6TO4_IPV4ADDR"
+
+        # Get IPv4 address from interface first
+        ipv4addrlocal="$(ipv6_get_ipv4addr_of_device $DEVICE)"
+        if [ -z "$ipv4addrlocal" ]; then
+            # Take configured from config file
+            ipv4addrlocal="$IPADDR"
+        fi
+    else
+        # Get IPv4 address from interface first (has precedence 2)
+        ipv4addr="$(ipv6_get_ipv4addr_of_device $DEVICE)"
+        if [ -z "$ipv4addr" ]; then
+            # Take configured from config file (precedence 3)
+            ipv4addr="$IPADDR"
+        fi
+        ipv4addrlocal="$ipv4addr"
+    fi
+
+    # Get local IPv4 address of dedicated tunnel
+    ipv4addr6to4local="$(ipv6_get_ipv4addr_of_tunnel tun6to4 local)"
+
+    if [ -z "$ipv4addrlocal" -o -z "$ipv4addr6to4local" ]; then
+        # no IPv4 addresses given, 6to4 sure not configured
+        valid6to4config="no"
+    else
+        # Check against configured 6to4 tunnel to see if this interface was
+        # used before
+        if [ "$ipv4addrlocal" != "$ipv4addr6to4local" ]; then
+            # IPv4 address of interface does't match local tunnel address,
+            # interface was not used for current 6to4 setup
+            valid6to4config="no"
+        fi
+    fi
+fi
+
+# Shutdown of 6to4, if configured
+if [ "$valid6to4config" = "yes" ]; then
+    if [ -n "$IPV6TO4_ROUTING" ]; then
+        # Delete routes to local networks
+        for devsuf in $IPV6TO4_ROUTING; do
+            dev="${devsuf%%-*}"
+            ipv6_cleanup_6to4_device $dev
+        done
+    fi
+
+    # Delete all configured 6to4 address
+    ipv6_cleanup_6to4_tunnels tun6to4
+
+    # Control running radvd
+    ipv6_trigger_radvd down "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE
+fi
+
+# Delete all current configured IPv6 addresses on this interface
+ipv6_cleanup_device $DEVICE

sysconfig/network-scripts/ifdown-isdn

@@ -0,0 +1 @@
+ifdown-ippp

sysconfig/network-scripts/ifdown-post

@@ -0,0 +1,69 @@
+#!/bin/sh
+# This should be called whenever an interface goes down, not just when
+# it is brought down explicitly.
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+unset REALDEVICE
+if [ "$1" = --realdevice ] ; then
+    REALDEVICE=$2
+    shift 2
+fi
+
+CONFIG=$1
+source_config
+
+[ -z "$REALDEVICE" ] && REALDEVICE=$DEVICE
+
+/etc/sysconfig/network-scripts/ifdown-routes ${REALDEVICE} ${DEVNAME}
+
+# Remove duplicate DNS entries and shift them,
+# to have always correct condition below...
+update_DNS_entries
+
+if ! is_false "${PEERDNS}" || is_true "${RESOLV_MODS}" && \
+    [ "${DEVICETYPE}" = "ppp" -o "${DEVICETYPE}" = "ippp" -o -n "${DNS1}" \
+    -o "${BOOTPROTO}" = "bootp" -o "${BOOTPROTO}" = "dhcp" ] ; then
+    if [ -f /etc/resolv.conf.save ]; then
+        change_resolv_conf /etc/resolv.conf.save
+        rm -f /etc/resolv.conf.save
+    fi
+    if [ "${DEVICETYPE}" = "ppp" -o "${DEVICETYPE}" = "ippp" ]; then
+        if [ -f /etc/ppp/peers/$DEVICE ] ; then
+            rm -f /etc/ppp/peers/$DEVICE
+        fi
+    fi
+fi
+
+# Reset the default route if this interface had a special one
+if ! check_default_route ; then
+    # ISDN device needs special handling dial on demand
+    if [ "${DEVICETYPE}" = "ippp" -o "${DEVICETYPE}" = "isdn" ] && \
+       [ "$DIALMODE" = "auto" ] ; then
+        if [ -z "$GATEWAY" ] ; then
+            /sbin/ip route add default ${METRIC:+metric} \
+                ${WINDOW:+window $WINDOW} dev ${DEVICE}
+        else
+            /sbin/ip route add default ${METRIC:+metric} \
+                ${WINDOW:+window $WINDOW} via ${GATEWAY}
+        fi
+    else
+        add_default_route ${DEVICE}
+    fi
+fi
+
+# Reset firewall zone (empty ZONE means default):
+if [ "${REALDEVICE}" != "lo" ]; then
+    dbus-send --print-reply --system --dest=org.fedoraproject.FirewallD1 \
+              /org/fedoraproject/FirewallD1 \
+              org.fedoraproject.FirewallD1.zone.removeInterface \
+              string:"" string:"${DEVICE}" \
+              > /dev/null 2>&1
+fi
+
+if [ -x /sbin/ifdown-local ]; then
+    /sbin/ifdown-local ${DEVICE}
+fi
+
+exit 0

sysconfig/network-scripts/ifdown-routes

@@ -0,0 +1,33 @@
+#! /bin/bash
+#
+# Drops static routes which go through device $1
+
+if [ -z "$1" ]; then
+    echo $"usage: ifdown-routes <net-device> [<nickname>]"
+    exit 1
+fi
+
+# The routes are actually dropped just by setting the link down, so nothing
+# needs to be done
+
+MATCH='^[[:space:]]*(\#.*)?$'
+
+# Routing rules
+FILES="/etc/sysconfig/network-scripts/rule-$1 /etc/sysconfig/network-scripts/rule6-$1"
+if [ -n "$2" -a "$2" != "$1" ]; then
+    FILES="$FILES /etc/sysconfig/network-scripts/rule-$2 /etc/sysconfig/network-scripts/rule6-$2"
+fi
+
+for file in $FILES; do
+    if [ -f "$file" ]; then
+        proto=
+        if [ "$file" != "${file##*/rule6-}" ]; then
+            proto="-6"
+        fi
+        { cat "$file" ; echo ; } | while read line; do
+            if [[ ! "$line" =~ $MATCH ]]; then
+                /sbin/ip $proto rule del $line
+            fi
+        done
+    fi
+done

sysconfig/network-scripts/ifdown-sit

@@ -0,0 +1,58 @@
+#!/bin/bash
+#
+# ifdown-sit
+#
+#
+# Taken from:
+# (P) & (C) 2000-2003 by Peter Bieringer <pb@bieringer.de>
+#
+#  You will find more information on the initscripts-ipv6 homepage at
+#   http://www.deepspace6.net/projects/initscripts-ipv6.html
+#
+# RHL integration assistance by Pekka Savola <pekkas@netcore.fi>
+#
+# Version 2002-11-01
+#
+# Uses following information from /etc/sysconfig/network-scripts/ifcfg-$1:
+#  DEVICE=<device>
+#
+
+
+. /etc/sysconfig/network
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+CONFIG=$1
+[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
+source_config
+
+# IPv6 don't need aliases anymore, config is skipped
+REALDEVICE=${DEVICE%%:*}
+[ "$DEVICE" != "$REALDEVICE" ] && exit 0
+
+[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1
+. /etc/sysconfig/network-scripts/network-functions-ipv6
+
+
+# Generic tunnel device sit0 is not supported here
+if [ "$DEVICE" = "sit0" ]; then
+    net_log $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking"
+    exit 1
+fi
+
+# IPv6 test, no module loaded, exit if system is not IPv6-ready
+ipv6_test testonly || exit 0
+
+# Test device status
+ipv6_test_device_status $DEVICE
+if [ $? != 0 -a $? != 11 ]; then
+    # device doesn't exist or other problem occurs
+    exit 0
+fi
+
+# Cleanup additional static routes
+/etc/sysconfig/network-scripts/ifdown-routes ${REALDEVICE}
+
+# Cleanup and shut down IPv6-in-IPv4 tunnel device
+ipv6_del_tunnel_device $DEVICE

sysconfig/network-scripts/ifdown-tunnel

@@ -0,0 +1,45 @@
+#!/bin/bash
+# Copyright (C) 1996-2006 Red Hat, Inc. all rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License, version 2,
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Thanks to:
+#  - Razvan Corneliu C.R. Vilt <razvan.vilt@linux360.ro>
+#  - Aaron Hope <aaron.hope@unh.edu>
+#  - Sean Millichamp <sean@enertronllc.com>
+# for providing the scripts this one is based on
+
+. /etc/init.d/functions
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+[ -f ../network ] && . ../network
+
+CONFIG=$1
+need_config "$CONFIG"
+source_config
+
+# Generic tunnel devices are not supported here
+if [ "$DEVICE" = gre0 -o "$DEVICE" = tunl0 -o "$DEVICE" = ip6tnl0 ]; then
+    net_log $"Device '$DEVICE' isn't supported as a valid GRE device name."
+    exit 1
+fi
+
+check_device_down "$DEVICE" && exit 0
+
+/sbin/ip link set dev "$DEVICE" down
+/sbin/ip tunnel del "$DEVICE"
+
+exec /etc/sysconfig/network-scripts/ifdown-post "$CONFIG"

sysconfig/network-scripts/ifup

@@ -0,0 +1,170 @@
+#!/bin/bash
+# Network Interface Configuration System
+# Copyright (c) 1996-2009 Red Hat, Inc. all rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License, version 2,
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+unset WINDOW # defined by screen, conflicts with our usage
+
+. /etc/init.d/functions
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+[ -f ../network ] && . ../network
+
+CONFIG=${1}
+
+[ -z "${CONFIG}" ] && {
+    echo $"Usage: ifup <configuration>" >&2
+    exit 1
+}
+
+if ! [ -f /etc/sysconfig/disable-deprecation-warnings ] && ! is_true ${DEPRECATION_WARNING_ISSUED}; then
+    net_log $"You are using 'ifup' script provided by 'network-scripts', which are now deprecated." warning ifup >&2
+    net_log $"'network-scripts' will be removed in one of the next major releases of RHEL." warning ifup >&2
+    net_log $"It is advised to switch to 'NetworkManager' instead - it provides 'ifup/ifdown' scripts as well." warning ifup >&2
+fi
+
+need_config "${CONFIG}"
+
+[ -f "${CONFIG}" ] || {
+    echo $"$0: configuration for ${1} not found." >&2
+    echo $"Usage: ifup <configuration>" >&2
+    exit 1
+}
+
+if [ ${UID} != 0 ]; then
+    if [ -x /usr/sbin/usernetctl ]; then
+        source_config
+        if /usr/sbin/usernetctl ${CONFIG} report ; then
+            exec /usr/sbin/usernetctl ${CONFIG} up
+        fi
+    fi
+    echo $"Users cannot control this device." >&2
+    exit 1
+fi
+
+source_config
+
+if [ "foo$2" = "fooboot" ] && [ "${ONBOOT}" = "no" -o "${ONBOOT}" = "NO" ]
+then
+    exit 0
+fi
+if [ -n "$IN_HOTPLUG" ] && [ "${HOTPLUG}" = "no" -o "${HOTPLUG}" = "NO" ]
+then
+    exit 0
+fi
+if [ -n "$IN_HOTPLUG" -a "${TYPE}" = "Bridge" ]; 
+then
+    exit 0
+fi
+
+if [ "$_use_nm" = "true" -a -n "$UUID" -a "$REALDEVICE" != "lo" ]; then
+    if [ "foo$2" = "fooboot" ] && [ "${TYPE}" = "Wireless" ]; then
+        exit 0
+    fi
+    [ -n "${DEVICE}" ] && is_nm_handling ${DEVICE} && exit 0
+    nmcli con up uuid "$UUID"
+    exit $?
+fi
+
+# Ethernet 802.1Q VLAN support
+if [ "${VLAN}" = "yes" ] && [ "$ISALIAS" = "no" ] && [ -n "$DEVICE" ]; then
+    if [ -n "${VID}" ]; then
+        if test -z "$PHYSDEV"; then
+            net_log $"PHYSDEV should be set for device ${DEVICE}"
+            exit 1
+        fi
+    else
+        VID=""
+        MATCH='^.+\.[0-9]{1,4}$'
+        if [[ "${DEVICE}" =~ $MATCH ]]; then
+            VID=$(echo "${DEVICE}" | LC_ALL=C sed 's/^.*\.\([0-9]\+\)/\1/')
+            PHYSDEV=${DEVICE%.*}
+        fi
+        MATCH='^vlan[0-9]{1,4}?'
+        if [[ "${DEVICE}" =~ $MATCH ]]; then
+            VID=$(echo "${DEVICE}" | LC_ALL=C sed 's/^vlan0*//')
+            # PHYSDEV should be set in ifcfg-vlan* file
+            if test -z "$PHYSDEV"; then
+                net_log $"PHYSDEV should be set for device ${DEVICE}"
+                exit 1
+            fi
+        fi
+    fi
+    if [ -n "$VID" ]; then
+        if [ ! -d /proc/net/vlan ]; then
+            if ! modprobe 8021q >/dev/null 2>&1 ; then
+                net_log $"No 802.1Q VLAN support available in kernel for device ${DEVICE}"
+                exit 1
+            fi
+        fi
+
+        is_available_wait ${PHYSDEV} ${DEVTIMEOUT} || {
+            if [ "$?" = "1" ] ; then
+                net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization."
+                exit 1
+            else
+                exit 0
+            fi
+        }
+
+        # Link on Physical device needs to be up but no ip required
+        check_device_down ${PHYSDEV} && { ip -o link set dev ${PHYSDEV} up; }
+
+        if [ ! -f /proc/net/vlan/${DEVICE} ]; then
+            if [ "${REORDER_HDR}" = "no" -o "${REORDER_HDR}" = "0" ]; then
+                FLAG_REORDER_HDR="reorder_hdr off"
+            fi
+
+            if [ "${GVRP}" = "yes" -o "${GVRP}" = "1" ]; then
+                FLAG_GVRP="gvrp on"
+            fi
+
+            ip link add dev ${DEVICE} link ${PHYSDEV} type vlan id ${VID} ${FLAG_REORDER_HDR} ${FLAG_GVRP} || {
+                (/usr/bin/logger -p daemon.info -t ifup \
+                     $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}" &) &
+                net_log $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}"
+                exit 1
+            }
+
+            [ -n "${VLAN_EGRESS_PRIORITY_MAP}" ] && ip link set dev ${DEVICE} type vlan egress ${VLAN_EGRESS_PRIORITY_MAP}
+        fi
+    fi
+
+    /usr/lib/systemd/systemd-sysctl \
+        --prefix "/proc/sys/net/ipv4/conf/${DEVICE}" \
+        --prefix "/proc/sys/net/ipv6/conf/${DEVICE}"
+fi
+
+if [ "${BOOTPROTO}" = "bootp" -o "${BOOTPROTO}" = "dhcp" ]; then
+    DYNCONFIG=true
+fi
+
+if [ -x /sbin/ifup-pre-local ]; then
+    /sbin/ifup-pre-local ${CONFIG} $2
+fi
+
+OTHERSCRIPT="/etc/sysconfig/network-scripts/ifup-${DEVICETYPE}"
+
+if [ ! -x ${OTHERSCRIPT} ]; then
+    OTHERSCRIPT="/etc/sysconfig/network-scripts/ifup-${TYPE}"
+fi
+
+if [ ! -x ${OTHERSCRIPT} ]; then
+    OTHERSCRIPT="/etc/sysconfig/network-scripts/ifup-eth"
+fi
+
+exec ${OTHERSCRIPT} ${CONFIG} $2

sysconfig/network-scripts/ifup-Team

@@ -0,0 +1,52 @@
+#!/bin/sh
+
+# Copyright (C) 2012-2015 Jiri Pirko <jiri@resnulli.us>
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+. /etc/init.d/functions
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+[ -f ../network ] && . ../network
+
+CONFIG=${1}
+
+need_config "${CONFIG}"
+
+source_config
+
+# If the device is a team, create it with teamd, if available.
+if [ -n "${TEAM_CONFIG}" ]; then
+	if [ ! -x /usr/bin/teamd ]; then
+		net_log $"Team support not available: teamd not found"
+		exit 1
+		fi
+	mkdir -p /run/teamd/  || exit 1
+	echo "${TEAM_CONFIG}" > /run/teamd/${DEVICE}.conf  || exit 1
+	/usr/bin/systemctl start teamd@${DEVICE}.service  || exit 1
+	# Bring up all existing port devices now
+	for device in $(LANG=C egrep -l "^[[:space:]]*TEAM_MASTER=\"?${DEVICE}\"?" /etc/sysconfig/network-scripts/ifcfg-*) ; do
+		is_ignored_file "$device" && continue
+		/sbin/ifup ${device##*/}
+	done
+fi
+
+if [ "${DEVICETYPE}" = "Team" ]; then
+	# This means that this was called directly, not via ifup-eth
+	# so execute ifup-eth now.
+	exec /etc/sysconfig/network-scripts/ifup-eth ${CONFIG} $2
+fi

sysconfig/network-scripts/ifup-TeamPort

@@ -0,0 +1,58 @@
+#!/bin/sh
+
+# Copyright (C) 2012-2015 Jiri Pirko <jiri@resnulli.us>
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+. /etc/init.d/functions
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+[ -f ../network ] && . ../network
+
+CONFIG=${1}
+
+need_config "${CONFIG}"
+
+source_config
+
+if [ "${DEVICETYPE}" = "TeamPort" ]; then
+	# This means that this was called directly, not via ifup-eth
+	# so execute ifup-eth now.
+	/etc/sysconfig/network-scripts/ifup-eth ${CONFIG} $2
+fi
+
+if [ -n "${TEAM_MASTER}" ]; then
+	if [ ! -x /usr/bin/teamdctl ]; then
+		net_log $"Team support not available: teamdctl not found"
+		exit 1
+	fi
+	/sbin/ip link show ${TEAM_MASTER} > /dev/null 2>&1
+	if [ $? -ne 0 ]; then
+		net_log $"Team master is not present yet, delaying port device initialization" info
+		exit 0
+	fi
+	/usr/bin/teamdctl ${TEAM_MASTER} port present ${DEVICE} 2> /dev/null
+	if [ $? -eq 0 ]; then
+		# port is already part of the team, nothing to do
+		exit 0
+	fi
+	/sbin/ip link set dev ${DEVICE} down
+	if [ -n "${TEAM_PORT_CONFIG}" ]; then
+		/usr/bin/teamdctl ${TEAM_MASTER} port config update ${DEVICE} "${TEAM_PORT_CONFIG}" || exit 1
+	fi
+	/usr/bin/teamdctl ${TEAM_MASTER} port add ${DEVICE} || exit 1
+fi

sysconfig/network-scripts/ifup-aliases

@@ -0,0 +1,370 @@
+#!/bin/bash
+
+#
+# configures aliases of device $1
+#
+# This script goes out of its way to arrive at the configuration of ip
+# aliases described in the ifcfg-$DEV:* and ifcfg-$DEV-range* files from
+# whatever existing configuration it may be given: existing aliases not
+# specified in the configuration will be removed, netmasks and broadcast
+# addrs will be updated on existing aliases, and new aliases will be setup.
+#
+#   range specification files:
+#
+# One can specify ranges of alised ipaddress using ifcfg-$DEV-range* files.
+# Specify multiple ranges using multiple files, such as ifcfg-eth0-range0 and
+# ifcfg-eth0-range1, etc. In these files, the following configuration variables 
+# specify the range:
+#
+#    IPADDR_START    -- ipaddr to start range at. eg "192.168.30.1"
+#    IPADDR_END      -- ipaddr to end range at. eg "192.168.30.254"
+#    CLONENUM_START  -- interface clone number to start using for this range. eg "0"
+#
+# The above example values create the interfaces eth0:0 through eth0:253 using
+# ipaddrs 192.168.30.1 through 192.168.30.254, inclusive.
+#
+# Other configuration variables such as NETMASK and BROADCAST may be specified
+# in the range file and will apply to all of the ipaddresses in the range. Range
+# files also inherit configuration from the ifcfg-$DEV file just like normal.
+#
+# Note that IPADDR_START and IPADR_END are required to be in the same class-c
+# block. I.e. IPADDR_START=192.168.30.1 and IPADDR_END=192.168.31.255 is
+# not valid.
+#
+#   speed with large sets of interfaces:
+#
+# Considerable effort was spent making this script fast. It can efficiently 
+# handle a thousand ip aliases on one interface.
+# 
+# With large sets of ipaddresses the NO_ALIASROUTING=yes configuration is
+# highly recommended. (This can be specified in ifcfg-$DEV and inherited.) This
+# prevents this script from setting up routing details for the virtual
+# interfaces, which I don't think is needed, because outgoing traffic can use the
+# main interface. However, make your own conclusions on what you need.
+# 
+# My test setup of four class C address blocks on a P166 took 25 seconds of 
+# which 16 seconds of this was spent in the ifcconfig calls. Without the 
+# NO_ALIASROUTING=yes config an additional 12 seconds is spent in route calls.
+#
+#   notes on internals:
+#
+# This script uses the bash "eval" command to lookup shell variables with names
+# which are generated from other shell variables. This allows us to, in effect,
+# create hashes using the shell variable namesspace by just including the hash
+# key in the name of the variable.
+#
+# This script originally written by: David Harris <dharris@drh.net> 
+#                                    Principal Engineer, DRH Internet
+#                                    June 30, 1999
+#
+#            modified by: Bill Nottingham <notting@redhat.com>
+
+TEXTDOMAIN=initscripts
+TEXTDOMAINDIR=/etc/locale
+
+device=$1
+if [ "$device" = "" ]; then
+  echo $"usage: ifup-aliases <net-device> [<parent-config>]\n"
+  exit 1
+fi
+
+PARENTCONFIG=${2:-ifcfg-$device}
+parent_device=$device
+
+cd /etc/sysconfig/network-scripts  
+. ./network-functions
+
+# Grab the current configuration of any running aliases, place device info
+# into variables of the form:
+# rdev_<index>_addr = <ip address>
+# rdev_<index>_pb = <prefix>_<broadcast>
+# rdevip_<ipaddress> = <index>
+# Example:
+# rdev_0_addr=192.168.1.1
+# rdev_0_pb=24_192.16.1.255
+# rdevip_192_168_1_1=0
+#
+# A list of all the devices is created in rdev_LIST.
+
+eval $( ip addr show $device label $device:* | \
+    awk 'BEGIN { COUNT=0;LAST_DEV="" } /inet / {
+        # Split IP address into address/prefix
+        split($2,IPADDR,"/");
+        # Create A_B_C_D IP address form
+        IP_ADDR=IPADDR[1];
+        gsub(/\./,"_",IP_ADDR);
+        # Split device into device:index
+        split($NF,DEV,":");
+        # Update last device
+        LAST_DEV=LAST_DEV " " DEV[2];
+        printf("rdev_%s_addr=%s\nrdevip_%s=%s\nrdev_%s_pb=%s_%s\nrdev_LIST=\"%s\"\n",
+        DEV[2],IPADDR[1],IP_ADDR,DEV[2],DEV[2],IPADDR[2],$4,LAST_DEV);
+    } END {
+        if(LAST_DEV == "") print "no_devices_are_up=yes"
+    }' );
+
+#
+# Store configuration of the parent device and network
+#
+
+# read from the /etc/sysconfig/network
+eval ` (
+    . /etc/sysconfig/network;
+    echo network_GATEWAY=$GATEWAY\;;
+    echo network_GATEWAYDEV=$GATEWAYDEV\;;
+) `
+
+# read defaults from the parent config file
+[ -f $PARENTCONFIG ] || {
+    net_log $"Missing config file $PARENTCONFIG."
+    exit 1
+}
+eval ` (
+    . ./$PARENTCONFIG;
+    echo default_PREFIX=$PREFIX\;;
+    echo default_NETMASK=$NETMASK\;;
+    echo default_BROADCAST=$BROADCAST\;;
+    echo default_GATEWAY=$GATEWAY\;;
+    echo default_NO_ALIASROUTING=$NO_ALIASROUTING\;;
+    echo default_ARPCHECK=$ARPCHECK\;;
+    echo default_ARPUPDATE=$ARPUPDATE\;;
+) `
+[ -z "$default_GATEWAY" ] && default_GATEWAY=$network_GATEWAY
+
+function ini_env ()
+{
+    DEVICE=""
+    IPADDR=""
+    IPV6ADDR=""
+    PREFIX=$default_PREFIX
+    NETMASK=$default_NETMASK
+    BROADCAST=$default_BROADCAST
+    GATEWAY=$default_GATEWAY
+    NO_ALIASROUTING=$default_NO_ALIASROUTING
+    ONPARENT=""
+    ARPCHECK=$default_ARPCHECK
+    ARPUPDATE=$default_ARPUPDATE
+}
+
+function is_default_gateway ()
+{
+    LC_ALL=C /sbin/ip route ls default scope global \
+        | awk '$3 == "'"$1"'" { found = 1; } END { exit found == 0; }'
+}
+
+#
+# Read the alias configuration files and enable each aliased
+# device using new_interface()
+#
+
+function new_interface ()
+{
+
+    ipa=$IPADDR; ipb=${ipa#*.}; ipc=${ipb#*.};
+    IPGLOP="${ipa%%.*}_${ipb%%.*}_${ipc%%.*}_${ipc#*.}";
+    DEVNUM=${DEVICE#*:}
+
+    MATCH='^[0-9A-Za-z_]*$'
+    if (LC_ALL=C; [[ ! "$DEVNUM" =~ $MATCH ]]); then
+        net_log $"error in $FILE: invalid alias number"
+        return 1
+    fi
+
+    eval "
+        ipseen=\$ipseen_${IPGLOP}; devseen=\$devseen_${DEVNUM};
+        ipseen_${IPGLOP}=$FILE; devseen_${DEVNUM}=$FILE;
+    ";
+
+    if [ -n "$ipseen" ]; then
+        net_log $"error in $FILE: already seen ipaddr $IPADDR in $ipseen"
+        return 1
+    fi
+
+    if [ -n "$devseen" ]; then
+        net_log $"error in $FILE: already seen device $parent_device:$DEVNUM in $devseen"
+        return 1
+    fi
+
+    if [ -z "$DEVICE" -o -z "$IPADDR" ]; then
+        if [ -n "$IPV6ADDR" -a -n "$DEVICE" ] && ! is_false "$IPV6INIT"; then
+            /etc/sysconfig/network-scripts/ifup-ipv6 ${DEVICE}
+            return $?
+        fi
+        net_log $"error in $FILE: didn't specify device or ipaddr"
+        return 1
+    fi
+
+    if [ -z "$NETMASK" -a -z "$PREFIX" ]; then
+        net_log $"error iN $FILE: didn't specify netmask or prefix"
+    fi
+
+    if [ -z "$PREFIX" ]; then
+        eval $(/bin/ipcalc --prefix ${IPADDR} ${NETMASK})
+    fi
+
+    if [ -z "$BROADCAST" -o "$BROADCAST" = "$default_BROADCAST" ]; then
+        eval $(/bin/ipcalc --broadcast ${IPADDR}/${PREFIX})
+    fi
+
+    if [ "$no_devices_are_up" = "yes" ]; then
+        setup_this=yes
+    else
+
+        setup_this=""
+
+        eval "
+        rdev_addr=\$rdev_${DEVNUM}_addr;
+        rdev_pb=\$rdev_${DEVNUM}_pb;
+        rdev_mark=\$rdev_${DEVNUM}_mark;
+        rdevip=\$rdevip_${IPGLOP};
+        ";
+
+        if [ -n "$rdev_addr" ]; then
+            if [ "$rdev_addr" = "${IPADDR}" ]; then
+                newmark=keep
+                if [ "$rdev_pb" != "${PREFIX}_${BROADCAST}" ]; then
+                    setup_this=freshen
+                else
+                    setup_this=no
+                fi
+            else
+                if [ "$rdev_mark" != "remove" ]; then
+                    /sbin/ip addr flush dev $parent_device label $parent_device:${DEVNUM}
+                fi
+                newmark=remove
+                setup_this=yes
+            fi
+            if [ -n "$rdev_mark" -a "$rdev_mark" != "$newmark" ]; then
+                net_log $"error in ifcfg-${parent_device}: files"
+                return 1
+            fi
+            eval " rdev_${DEVNUM}_mark=\$newmark ";
+        else
+            setup_this=yes
+        fi
+
+        if [ -n "$rdevip" -a "$rdevip" != "${DEVNUM}" ]; then
+            eval " mark_remove=\$rdev_${rdevip}_mark ";
+            if [ -n "$mark_remove" -a "$mark_remove" != "remove" ]; then
+                net_log $"error in ifcfg-${parent_device}: files"
+                return 1
+            fi
+            if [ "$mark_remove" != "remove" ]; then
+                eval " rdev_${rdevip}_mark=remove ";
+                /sbin/ip addr flush dev $parent_device label $parent_device:$rdevip
+            fi
+        fi
+
+    fi
+
+    if [ "$setup_this" = "freshen" ] ; then
+        # we can do the freshen stuff right now
+        /sbin/ip addr change ${IPADDR}/${PREFIX} brd ${BROADCAST}
+    fi
+
+    if [ "$setup_this" = "yes" ] ; then
+        if [ "${parent_device}" != "lo" ] &&  [ "${ARPCHECK}" != "no" ] && \
+                is_available ${parent_device} && \
+                ( grep -qswi "up" /sys/class/net/${parent_device}/operstate ||  grep -qswi "1" /sys/class/net/${parent_device}/carrier ) ; then
+            echo $"Determining if ip address ${IPADDR} is already in use for device ${parent_device}..."
+            ARPING=$(/sbin/arping -c 2 -w ${ARPING_WAIT:-3} -D -I ${parent_device} ${IPADDR})
+            if [ $? = 1 ]; then
+                ARPINGMAC=$(echo $ARPING | sed -ne 's/.*\[\(.*\)\].*/\1/p')
+                net_log $"Error, some other host ($ARPINGMAC) already uses address ${IPADDR}."
+                return 1
+            fi
+        fi
+
+        /sbin/ip addr add ${IPADDR}/${PREFIX} brd ${BROADCAST} \
+            dev ${parent_device} label ${DEVICE}
+
+        # update ARP cache of neighboring computers:
+        if ! is_false "${ARPUPDATE}" && [ "${REALDEVICE}" != "lo" ]; then
+            /sbin/arping -q -A -c 1 -I ${parent_device} ${IPADDR}
+            ( sleep 2; /sbin/arping -q -U -c 1 -I ${parent_device} ${IPADDR} ) > /dev/null 2>&1 < /dev/null &
+        fi
+
+        ! is_false "$IPV6INIT" && \
+            /etc/sysconfig/network-scripts/ifup-ipv6 ${DEVICE}
+
+        if [ "$NO_ALIASROUTING" != yes ]; then
+
+            GATEWAYDEV=$network_GATEWAYDEV;
+
+            if [ -n "${GATEWAY}" -a \
+                    \( -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${DEVICE}" \) ]; then
+                # set up default gateway, if it isn't already there
+                if ! is_default_gateway "$GATEWAY"; then
+                    ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY} dev ${DEVICE}
+                fi
+            fi
+
+            /etc/sysconfig/network-scripts/ifup-routes ${DEVICE} ${NAME}
+
+            ifuplocal_queue="$ifuplocal_queue $DEVICE"
+        fi
+    fi
+}
+
+if [ "$BASH_VERSINFO" ]; then
+    shopt -s nullglob
+else
+    allow_null_glob_expansion=foo
+fi
+
+for FILE in ifcfg-${parent_device}:* ; do
+    is_ignored_file "$FILE" && continue
+    ini_env
+    . ./$FILE
+    [ -z "$DEVICE" ] && DEVICE=${FILE##ifcfg-}
+    [ "$ONPARENT" != "no" -a "$ONPARENT" != "NO" ] && new_interface
+    unset DEVICE
+done
+
+for FILE in ifcfg-${parent_device}-range* ; do
+    is_ignored_file "$FILE" && continue
+    ini_env
+    . ./$FILE
+
+    ipaddr_prefix=${IPADDR_START%.*}
+    ipaddr_startnum=${IPADDR_START##*.}
+    ipaddr_endnum=${IPADDR_END##*.}
+
+    if [ "${IPADDR_START%.*}" != "${IPADDR_END%.*}" ]; then
+        net_log $"error in $FILE: IPADDR_START and IPADDR_END don't agree"
+        continue
+    fi
+
+    if [ $ipaddr_startnum -gt $ipaddr_endnum ]; then
+        net_log $"error in $FILE: IPADDR_START greater than IPADDR_END"
+        continue
+    fi
+
+    ipaddr_num=$ipaddr_startnum
+    ipaddr_clonenum=$CLONENUM_START
+
+    while [ $ipaddr_num -le $ipaddr_endnum ]; do
+        IPADDR="$ipaddr_prefix.$ipaddr_num"
+        DEVICE="$parent_device:$ipaddr_clonenum"
+        IPV6INIT="no"
+        [ "$ONPARENT" != "no" -a "$ONPARENT" != "NO" ] && new_interface
+        ipaddr_num=$(($ipaddr_num+1))
+        ipaddr_clonenum=$(($ipaddr_clonenum+1))
+    done
+done
+
+#
+# Remove any devices that should not be around
+#
+for DEVNUM in $rdev_LIST ; do
+    eval " rdev_mark=\$rdev_${DEVNUM}_mark "
+    if [ -z "$rdev_mark" ]; then
+        /sbin/ip addr flush dev $parent_device label $parent_device:${DEVNUM}
+    fi
+done
+
+if [ -x /sbin/ifup-local ]; then
+    for DEVICE in $ifuplocal_queue ; do
+        /sbin/ifup-local ${DEVICE}
+    done
+fi

sysconfig/network-scripts/ifup-bnep

@@ -0,0 +1,55 @@
+#! /bin/bash
+
+. /etc/init.d/functions
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+[ -f ../network ] && . ../network
+
+CONFIG=${1}
+
+source_config
+
+# On hotplug events, just bring the virtual device up as if it's normal Ethernet
+if [ -n "$IN_HOTPLUG" ]; then
+    exec sh -x /etc/sysconfig/network-scripts/ifup-eth ${CONFIG} $2 
+fi
+
+start_panu()
+{
+    PANDARGS="--persist --pidfile=/run/pand-${DEVICE}.pid --ethernet=${DEVICE} --autozap"
+    [ "${CACHE}" != "no" -a "${CACHE}" != "NO" ] && PANDARGS="${PANDARGS} --cache"
+    if [ "${REMOTEBDADDR}" = "" ]; then
+        PANDARGS="${PANDARGS} --search"
+    else
+        PANDARGS="${PANDARGS} --connect ${REMOTEBDADDR}"
+    fi
+    /usr/bin/pand ${PANDARGS}
+}
+
+start_nap()
+{
+    :
+}
+
+start_gn()
+{
+    :
+}
+
+case "$ROLE" in
+PANU)
+    start_panu
+    ;;
+NAP)
+    start_nap
+    ;;
+GN)
+    start_gn
+    ;;
+*)
+    echo Unknown BNEP mode :$ROLE
+    ;;
+esac
+

sysconfig/network-scripts/ifup-eth

@@ -0,0 +1,383 @@
+#!/bin/bash
+# Network Interface Configuration System
+# Copyright (c) 1996-2014 Red Hat, Inc. all rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License, version 2,
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+. /etc/init.d/functions
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+[ -f ../network ] && . ../network
+
+CONFIG=${1}
+
+need_config "${CONFIG}"
+
+source_config
+
+if [ "${BOOTPROTO}" = "bootp" -o "${BOOTPROTO}" = "dhcp" ]; then
+    DYNCONFIG=true
+fi
+
+# load the module associated with that device
+# /sbin/modprobe ${REALDEVICE}
+is_available ${REALDEVICE}
+
+# bail out, if the MAC does not fit
+if [ -n "${HWADDR}" ]; then
+    FOUNDMACADDR=$(get_hwaddr ${REALDEVICE})
+    if [ "${FOUNDMACADDR}" != "${HWADDR}" -a "${FOUNDMACADDR}" != "${MACADDR}" ]; then
+        net_log $"Device ${DEVICE} has different MAC address than expected, ignoring."
+        exit 1
+    fi
+fi
+
+# If the device is a bridge, create it
+if [ "${TYPE}" = "Bridge" ]; then
+    bridge_opts=""
+    [ -n "${DELAY}" ] && bridge_opts+="forward_delay ${DELAY} "
+    if is_true "${STP}"; then
+	    bridge_opts+="stp_state 1 "
+    elif is_false "${STP}"; then
+	    bridge_opts+="stp_state 0 "
+    fi
+    [ -n "${PRIO}" ] && bridge_opts+="priority ${PRIO} "
+    [ -n "${AGEING}" ] && bridge_opts+="ageing_time ${AGEING} "
+
+    if [ ! -d /sys/class/net/${DEVICE}/bridge ]; then
+        ip link add ${DEVICE} type bridge $bridge_opts || exit 1
+    elif [ -n "${bridge_opts}" ]; then
+        ip link set dev ${DEVICE} type bridge $bridge_opts || exit 1
+    fi
+    unset bridge_opts
+
+    # add the bits to setup driver parameters here
+    for arg in $BRIDGING_OPTS ; do
+        key=${arg%%=*};
+        value=${arg##*=};
+        if [ "${key}" != "multicast_router" -a "${key}" != "hash_max" -a "${key}" != "multicast_snooping" ]; then
+            echo $value > /sys/class/net/${DEVICE}/bridge/$key
+        fi
+    done
+
+    # set LINKDELAY (used as timeout when calling check_link_down())
+    # to at least (${DELAY} * 2) + 7 if STP is enabled. This is the
+    # minimum time required for /sys/class/net/$REALDEVICE/carrier to
+    # become 1 after "ip link set dev $DEVICE up" is called.
+    if is_true "${STP}"; then
+        if [ -n "${DELAY}" ]; then
+          forward_delay="${DELAY}"
+        else
+          # If the ${DELAY} value is not set by the user, then we need to obtain
+          # the forward_delay value from kernel first, and convert it to seconds.
+          # Otherwise STP might not correctly complete the startup before trying
+          # to obtain an IP address from DHCP.
+          forward_delay="$(cat /sys/devices/virtual/net/${DEVICE}/bridge/forward_delay)"
+          forward_delay="$(convert2sec ${forward_delay} centi)"
+        fi
+
+        forward_delay=$(bc -q <<< "${forward_delay} * 2 + 7")
+
+        # It's possible we are comparing floating point numbers here, therefore
+        # we are using 'bc' for comparison. The [ ] and [[ ]] do not work.
+        (( $(bc -l <<< "${LINKDELAY:-0} < ${forward_delay}") )) && LINKDELAY=${forward_delay}
+
+        unset forward_delay
+    fi
+fi
+
+# Create tap device.
+if [ "${TYPE}" = "Tap" ]; then
+    [ -n "${OWNER}" ] && OWNER="user ${OWNER}"
+    TUNMODE="mode tap"
+    [[ ${DEVICE} == tun* ]] && TUNMODE="mode tun"
+    ip tuntap add ${TUNMODE} ${OWNER} dev ${DEVICE} > /dev/null
+fi
+
+# Team master initialization.
+if [ -n "${TEAM_CONFIG}" ] && [ ! "${DEVICETYPE}" = "Team" ] && [ -x ./ifup-Team ]; then
+    ./ifup-Team ${CONFIG} $2
+fi
+
+if [ -z "${REALDEVICE}" ]; then
+  net_log $"Device name does not seem to be present."
+  exit 1
+fi
+
+# now check the real state
+is_available_wait ${REALDEVICE} ${DEVTIMEOUT} || {
+    if [ -n "$alias" ]; then
+        net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization."
+    else
+        net_log $"Device ${DEVICE} does not seem to be present, delaying initialization."
+    fi
+    exit 1
+}
+
+
+# this isn't the same as the MAC in the configuration filename.  It is
+# available as a configuration option in the config file, forcing the kernel
+# to think an ethernet card has a different MAC address than it really has.
+if [ -n "${MACADDR}" ]; then
+    ip link set dev ${DEVICE} address ${MACADDR}
+fi
+if [ -n "${MTU}" ]; then
+    ip link set dev ${DEVICE} mtu ${MTU}
+fi
+
+# is the device wireless? If so, configure wireless device specifics
+is_wireless_device ${DEVICE} && . ./ifup-wireless
+
+# Team slave device?
+if [ -n "${TEAM_MASTER}" ] && [ ! "${DEVICETYPE}" = "TeamPort" ] && [ -x ./ifup-TeamPort ]; then
+    ./ifup-TeamPort ${CONFIG} $2
+    ethtool_set
+    exit 0
+fi
+
+# slave device?
+if [ "${SLAVE}" = yes -a "${ISALIAS}" = no -a "${MASTER}" != "" ]; then
+    install_bonding_driver ${MASTER}
+    grep -wq "${DEVICE}" /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null || {
+        /sbin/ip link set dev ${DEVICE} down
+        echo "+${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null
+    }
+    ethtool_set
+
+    exit 0
+fi
+
+# Bonding initialization. For DHCP, we need to enslave the devices early,
+# so it can actually get an IP.
+if [ "$ISALIAS" = no ] && is_bonding_device ${DEVICE} ; then
+    install_bonding_driver ${DEVICE}
+    /sbin/ip link set dev ${DEVICE} up
+    for device in $(LANG=C grep -l "^[[:space:]]*MASTER=['\"]\?${DEVICE}['\"]\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-*) ; do
+        is_ignored_file "$device" && continue
+        /sbin/ifup ${device##*/} || net_log "Unable to start slave device ${device##*/} for master ${DEVICE}." warning
+    done
+
+    [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}
+
+    # add the bits to setup the needed post enslavement parameters
+    for arg in $BONDING_OPTS ; do   
+        key=${arg%%=*};
+        value=${arg##*=};
+        if [ "${key}" = "primary" ]; then 
+            echo $value > /sys/class/net/${DEVICE}/bonding/$key
+        fi
+    done
+fi
+
+# If the device is part of a bridge, add the device to the bridge
+if [ -n "${BRIDGE}" ]; then
+    if [ ! -d /sys/class/net/${BRIDGE}/bridge ]; then
+        ip link add ${BRIDGE} type bridge 2>/dev/null
+    fi
+    /sbin/ip addr flush dev ${DEVICE} 2>/dev/null
+    /sbin/ip link set dev ${DEVICE} up
+    ethtool_set
+    [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}
+    ip link set dev ${DEVICE} master ${BRIDGE}
+    # add the bits to setup driver parameters here
+    for arg in $BRIDGING_OPTS ; do
+        key=${arg%%=*};
+        value=${arg##*=};
+        echo $value > /sys/class/net/${DEVICE}/brport/$key
+    done
+    # Upon adding a device to a bridge,
+    # it's necessary to make radvd reload its config
+    [ -r /run/radvd/radvd.pid ] && kill -HUP $(cat /run/radvd/radvd.pid)
+    exit 0
+fi
+
+if [ -n "${DYNCONFIG}" ] && [ -x /sbin/dhclient ]; then
+    if is_true "${PERSISTENT_DHCLIENT}"; then
+        ONESHOT="";
+    else
+        ONESHOT="-1";
+    fi;
+    generate_config_file_name
+    generate_lease_file_name
+
+    # Initialize the dhclient args and obtain the hostname options if needed:
+    DHCLIENTARGS="${DHCLIENTARGS} ${ONESHOT} -q ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /run/dhclient-${DEVICE}.pid"
+    set_hostname_options DHCLIENTARGS
+
+    echo
+    echo -n $"Determining IP information for ${DEVICE}..."
+    if ! is_true "${PERSISTENT_DHCLIENT}" && check_link_down ${DEVICE}; then
+        echo $" failed; no link present.  Check cable?"
+        exit 1
+    fi
+
+    ethtool_set
+
+    if /sbin/dhclient ${DHCLIENTARGS} ${DEVICE} ; then
+        echo $" done."
+        dhcpipv4="good"
+    else
+        echo $" failed."
+        if is_true "${IPV4_FAILURE_FATAL}"; then
+            exit 1
+        fi
+        if is_false "$IPV6INIT" || ! is_true "$DHCPV6C"; then
+            exit 1
+        fi
+        net_log "Unable to obtain IPv4 DHCP address ${DEVICE}." warning
+    fi
+    # end dynamic device configuration
+else 
+    if [ -z "${IPADDR}" -a -z "${IPADDR0}" -a -z "${IPADDR1}" -a -z "${IPADDR2}" ]; then
+        # enable device without IP, useful for e.g. PPPoE
+        ip link set dev ${REALDEVICE} up
+        ethtool_set
+        [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}
+    else
+
+        expand_config
+
+        [ -n "${ARP}" ] && \
+            ip link set dev ${REALDEVICE} $(toggle_value arp $ARP)
+
+        if ! ip link set dev ${REALDEVICE} up ; then
+            net_log $"Failed to bring up ${DEVICE}."
+            exit 1
+        fi
+
+        ethtool_set
+
+        [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}
+
+        if [ "${DEVICE}" = "lo" ]; then
+            SCOPE="scope host"
+        else
+            SCOPE=${SCOPE:-}
+        fi
+
+        if [ -n "$SRCADDR" ]; then
+            SRC="src $SRCADDR"
+        else
+            SRC=
+        fi
+
+        # set IP address(es)
+        for idx in {0..256} ; do
+            if [ -z "${ipaddr[$idx]}" ]; then
+                break
+            fi
+
+            if ! LC_ALL=C ip addr ls ${REALDEVICE} | LC_ALL=C grep -q "${ipaddr[$idx]}/${prefix[$idx]}" ; then
+                if [ "${REALDEVICE}" != "lo" ] && [ "${arpcheck[$idx]}" != "no" ] ; then
+                    ARPING=$(/sbin/arping -c 2 -w ${ARPING_WAIT:-3} -D -I ${REALDEVICE} ${ipaddr[$idx]})
+                    if [ $? = 1 ]; then
+                        ARPINGMAC=$(echo $ARPING |  sed -ne 's/.*\[\(.*\)\].*/\1/p')
+                        net_log $"Error, some other host ($ARPINGMAC) already uses address ${ipaddr[$idx]}."
+                        exit 1
+                    fi
+                fi
+
+                if ! ip addr add ${ipaddr[$idx]}/${prefix[$idx]} \
+                    brd ${broadcast[$idx]:-+} dev ${REALDEVICE} ${SCOPE} label ${DEVICE}; then
+                    net_log $"Error adding address ${ipaddr[$idx]} for ${DEVICE}."
+                fi
+            fi
+
+            if [ -n "$SRCADDR" ]; then
+                sysctl -w "net.ipv4.conf.${SYSCTLDEVICE}.arp_filter=1" >/dev/null 2>&1
+            fi
+
+            # update ARP cache of neighboring computers
+            if ! is_false "${arpupdate[$idx]}" && [ "${REALDEVICE}" != "lo" ]; then
+                /sbin/arping -q -A -c 1 -I ${REALDEVICE} ${ipaddr[$idx]}
+                ( sleep 2;
+                /sbin/arping -q -U -c 1 -I ${REALDEVICE} ${ipaddr[$idx]} ) > /dev/null 2>&1 < /dev/null &
+            fi
+
+            # set lifetime of address to forever
+            ip addr change ${ipaddr[$idx]}/${prefix[$idx]} dev ${REALDEVICE} valid_lft forever preferred_lft forever
+        done
+
+        # Set a default route.
+        if [ "${DEFROUTE}" != "no" ] && [ -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${REALDEVICE}" ]; then
+            # set up default gateway. replace if one already exists
+            if [ -n "${GATEWAY}" ] && [ "$(ipcalc --network ${GATEWAY} ${netmask[0]} 2>/dev/null)" = "NETWORK=${NETWORK}" ]; then
+                ip route replace default ${METRIC:+metric $METRIC} \
+                    ${EXTRA_ROUTE_OPTS} \
+                    via ${GATEWAY} ${WINDOW:+window $WINDOW} ${SRC} \
+                    ${GATEWAYDEV:+dev $GATEWAYDEV} ||
+                    net_log $"Error adding default gateway ${GATEWAY} for ${DEVICE}."
+            elif [ "${GATEWAYDEV}" = "${DEVICE}" ]; then
+                ip route replace default ${METRIC:+metric $METRIC} \
+                    ${EXTRA_ROUTE_OPTS} \
+                    ${SRC} ${WINDOW:+window $WINDOW} dev ${REALDEVICE} ||
+                    net_log $"Error adding default gateway for ${REALDEVICE}."
+            fi
+        fi
+    fi
+fi
+
+# Add Zeroconf route.
+if [ -z "${NOZEROCONF}" -a "${ISALIAS}" = "no" -a "${REALDEVICE}" != "lo" ]; then
+    ip route add 169.254.0.0/16 dev ${REALDEVICE} metric $((1000 + $(cat /sys/class/net/${REALDEVICE}/ifindex))) scope link
+fi
+
+if [ "${TYPE}" = "Bridge" ]; then
+    for arg in $BRIDGING_OPTS ; do
+        key=${arg%%=*};
+        value=${arg##*=};
+        if [ "${key}" = "multicast_router" -o "${key}" = "hash_max" -o "${key}" = "multicast_snooping" ]; then
+            echo $value > /sys/class/net/${DEVICE}/bridge/$key
+        fi
+    done
+fi
+
+# IPv6 initialisation?
+/etc/sysconfig/network-scripts/ifup-ipv6 ${CONFIG}
+if is_true "${DHCPV6C}" && [ -x /sbin/dhclient ]; then
+
+    # Assign interface into a firewalld zone so we can
+    # obtain the IPv6 via DHCPv6 (empty ZONE means default):
+    if [ "${REALDEVICE}" != "lo" ]; then
+        dbus-send --print-reply --system --dest=org.fedoraproject.FirewallD1 \
+                  /org/fedoraproject/FirewallD1 \
+                  org.fedoraproject.FirewallD1.zone.changeZoneOfInterface \
+                  string:"${ZONE}" string:"${DEVICE}" \
+                  > /dev/null 2>&1
+    fi
+
+    generate_config_file_name 6
+    generate_lease_file_name 6
+    echo
+    echo -n $"Determining IPv6 information for ${DEVICE}..."
+
+    # Initialize the dhclient args for IPv6 and obtain the hostname options if needed:
+    DHCLIENTARGS="-6 -1 ${DHCPV6C_OPTIONS} ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /run/dhclient6-${DEVICE}.pid ${DEVICE}"
+    set_hostname_options DHCLIENTARGS
+
+    if /sbin/dhclient $DHCLIENTARGS; then
+        echo $" done."
+    else
+        echo $" failed."
+        if [ "${dhcpipv4}" = "good" -o -n "${IPADDR}" ]; then
+            net_log "Unable to obtain IPv6 DHCP address ${DEVICE}." warning
+        else
+            exit 1
+        fi
+    fi
+fi
+
+exec /etc/sysconfig/network-scripts/ifup-post ${CONFIG} ${2}

sysconfig/network-scripts/ifup-ippp

@@ -0,0 +1,384 @@
+#! /bin/bash
+#
+# ifup-ippp
+# 
+# This script is normally called from the ifup script when it detects an ippp device.
+
+. /etc/init.d/functions
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+# Get global network configuration
+[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
+
+GATEWAY=""
+
+# set device
+CONFIG=$1
+[ -f "${CONFIG}" ] || CONFIG=ifcfg-${1}
+source_config
+
+if [ "${2}" = "boot" -a "${ONBOOT}" = "no" ]; then
+    exit
+fi
+
+if [ ! -f /var/lock/subsys/isdn ] && [ -x /etc/init.d/isdn ] ; then
+    /etc/init.d/isdn start
+fi
+
+# check that ipppd is available for syncppp 
+if [ "$ENCAP" = "syncppp" ]; then
+    if [ ! -x /sbin/ipppd ] && [ ! -x /usr/sbin/ipppd ] ; then
+        /usr/bin/logger -p daemon.info -t ifup-ippp "ipppd does not exist or is not executable"
+        exit 1
+    fi
+fi
+
+# check that isdnctrl is available
+if [ ! -x /sbin/isdnctrl ] && [ ! -x /usr/sbin/isdnctrl ] ; then
+    /usr/bin/logger -p daemon.info -t ifup-ippp "isdnctrl does not exist or is not executable"
+    exit 1
+fi
+
+# check all ISDN devices
+if ! isdnctrl list all >/dev/null 2>&1 ; then
+    /usr/bin/logger -p daemon.info -t ifup-ippp "cannot list ISDN devices"
+    exit 1
+fi
+
+# check if device already is configured
+isdnctrl list $DEVICE >/dev/null 2>&1 && exit 0
+
+function log_echo()
+{
+    /usr/bin/logger -p daemon.info -t ifup-ippp $"$*"
+}
+
+function log_isdnctrl()
+{
+    /usr/bin/logger -p daemon.info -t ifup-ippp isdnctrl $*
+    isdnctrl $* >/dev/null 2>&1 || exit 1
+}
+
+function create_option_file()
+{
+    umask 066
+    echo "$1" > /etc/ppp/ioption-secret-$DEVICE
+    umask 022
+}
+
+function start_ibod()
+{
+    # don't start ibod, if it's running
+    [ -f /var/lock/subsys/ibod ] && return
+
+    device=$1
+    if [ -f /etc/isdn/ibod.cf ] && [ -x /usr/sbin/ibod ] ; then
+        ibod $device &
+        pid=$(pidof ibod)
+        [ -n "$pid" ] && touch /var/lock/subsys/ibod
+    fi
+}
+
+function addprovider()
+{
+    options=
+    if [ -z "$PHONE_OUT" ]; then
+        log_echo "Error: $1: no outgoing phone number set"
+        return 1
+    fi
+
+    # set the encapsulation mode
+    [ -z "$ENCAP" ] && ENCAP="syncppp"
+
+    # set the dial mode
+    [ -z "$DIALMODE" ] && DIALMODE="off"
+
+    [ "$AUTH" = "none" -o "$AUTH" = "noauth" -o -z "$AUTH" ] && AUTH="-pap -chap"
+
+    # set layer-2/3 protocol 
+    [ -z "$L2_PROT" ] && L2_PROT="hdlc"
+    [ -z "$L3_PROT" ] && L3_PROT="trans"
+
+    # check local/remote IP
+    [ -z "$IPADDR" ] && IPADDR="0.0.0.0"
+    [ -z "$GATEWAY" ] && GATEWAY="0.0.0.0"
+
+    # set default route
+    [ "$DEFROUTE" = "yes" ] && options="$options defaultroute deldefaultroute"
+
+    # set authentication
+    _auth=$(echo "$AUTH" | sed 's/[a-z -]*//g')
+    if [ -n "$_auth" ]; then
+        if [ -z "$USER" -a "$DIALIN" != "on" ]; then
+            log_echo " Error: $1 (syncppp) user is not set"
+            return 1
+        fi
+        if [ "$DIALIN" != "on" ]; then
+            # we should hide the user name, so i add user name to option file.
+            if [ "$AUTH" = "-pap +chap" ]; then
+                create_option_file "name \"$USER\""
+            else
+                create_option_file "user \"$USER\""
+            fi
+            options="$options file /etc/ppp/ioption-secret-$DEVICE"
+        fi
+
+        # authentication options:
+        # +pap and/or +chap does not work correct by dialout - remove
+        # them if it's configured as dialout
+        [ "$DIALIN" = "on" ] || AUTH=$(echo "$AUTH" | sed 's/+[a-z]*//g')
+    fi
+
+    # add ISDN device 
+    log_isdnctrl addif $DEVICE
+
+    # set local MSN
+    [ -z "$MSN" ]  || log_isdnctrl eaz $DEVICE $MSN
+
+    # set dialout numbers
+    if echo $COUNTRYCODE | grep ":" >/dev/null 2>&1 ; then
+        COUNTRYCODE="$(echo $COUNTRYCODE | cut -f 2 -d ':')"
+        [ "$COUNTRYCODE" = "0" ] && COUNTRYCODE=
+    else
+        COUNTRYCODE=
+    fi
+    for i in $PHONE_OUT; do
+        log_isdnctrl addphone $DEVICE out $COUNTRYCODE$PREFIX$AREACODE$i
+    done
+    for i in $PHONE_IN; do
+        log_isdnctrl addphone $DEVICE in $i
+    done
+
+    # set layer-2/3 protocol
+    log_isdnctrl l2_prot $DEVICE $L2_PROT
+    log_isdnctrl l3_prot $DEVICE $L3_PROT
+
+    # set encapsulation
+    log_isdnctrl encap $DEVICE $ENCAP
+
+    # set dialmode
+    log_isdnctrl dialmode $DEVICE $DIALMODE
+
+    [ -n "$SECURE" ] && log_isdnctrl secure $DEVICE $SECURE
+    [ -n "$HUPTIMEOUT" ] && log_isdnctrl huptimeout $DEVICE $HUPTIMEOUT
+    [ -n "$CHARGEHUP" ] && log_isdnctrl chargehup $DEVICE $CHARGEHUP
+    [ -n "$CHARGEINT" ] && log_isdnctrl chargeint $DEVICE $CHARGEINT
+
+    [ -n "$IHUP" ] && log_isdnctrl ihup $DEVICE $IHUP
+
+    # set the number of dial atempts for each number
+    [ -n "$DIALMAX" ] && log_isdnctrl dialmax $DEVICE $DIALMAX
+
+    # set callback
+    if [ "$CALLBACK" = "out" -o "$CALLBACK" = "in" ] ; then
+        log_isdnctrl callback $DEVICE $CALLBACK
+    else
+        log_isdnctrl callback $DEVICE off
+    fi
+    [ -n "$CBDELAY" ] && log_isdnctrl cbdelay $DEVICE $CBDELAY
+    [ -n "$CBHUP" ] && log_isdnctrl cbhup $DEVICE $CBHUP
+
+    options="$options ipparam $DEVNAME"
+
+    [ "$ENCAP" = "syncppp" ] && log_isdnctrl pppbind $DEVICE
+
+    if [ "$IPADDR" = "0.0.0.0" ]; then
+        options="$options ipcp-accept-local"
+    else
+        if [ "$DIALIN" != "on" ]; then
+            options="$options noipdefault"
+        fi
+    fi
+    # Add device
+    options="$options /dev/$DEVICE"
+
+    # set channel bundling
+    if [ "$BUNDLING" = "yes" -o "$BUNDLING" = "on" ] && [ -n "$SLAVE_DEVICE" ]; then
+        [ -z "$SLAVE_MSN" ] && SLAVE_MSN="$MSN"
+        [ -z "$SLAVE_PHONE_OUT" ] && SLAVE_PHONE_OUT="$PHONE_OUT"
+        [ -z "$SLAVE_PHONE_IN" ] && SLAVE_PHONE_IN="$PHONE_IN"
+        [ -z "$SLAVE_HUPTIMEOUT" ] && SLAVE_HUPTIMEOUT="$HUPTIMEOUT"
+        [ -z "$SLAVE_CHARGEHUP" ] && SLAVE_CHARGEHUP="$CHARGEHUP"
+        [ -z "$SLAVE_CHARGEINT" ] && SLAVE_CHARGEINT="$CHARGEINT"
+        [ -z "$SLAVE_CBHUP" ] && SLAVE_CBHUP="$CBHUP"
+        [ -z "$SLAVE_IHUP" ] && SLAVE_IHUP="$IHUP"
+        [ -z "$SLAVE_DIALMAX" ] && SLAVE_DIALMAX="$DIALMAX"
+        [ -z "$SLAVE_CALLBACK" ] && SLAVE_CALLBACK="$CALLBACK"
+        [ -z "$SLAVE_CBDELAY" ] && SLAVE_CBDELAY="$CBDELAY"
+        if [ "$DIALIN" != "on" ] ; then
+            [ -z "$SLAVE_DIALMODE" ] && SLAVE_DIALMODE="auto"
+        else
+            # Master should not dial by default on incoming MPPP
+            [ -z "$SLAVE_DIALMODE" ] && SLAVE_DIALMODE="$DIALMODE"
+        fi
+
+        slave=$SLAVE_DEVICE
+        options="$options /dev/$slave +mp"
+
+        # Create slave and set options
+        log_isdnctrl addslave $DEVICE $slave
+        [ -z $SLAVE_MSN ] || log_isdnctrl eaz $slave $SLAVE_MSN
+
+        # set phone number
+        for i in $SLAVE_PHONE_OUT; do
+            log_isdnctrl addphone $slave out $COUNTRYCODE$PREFIX$AREACODE$i
+        done
+        for i in $SLAVE_PHONE_IN; do
+            log_isdnctrl addphone $slave in $i
+        done
+
+        # set layer-2/3 protocol
+        log_isdnctrl l2_prot $slave $L2_PROT
+        log_isdnctrl l3_prot $slave $L3_PROT
+
+        # set encapsulation
+        log_isdnctrl encap $slave $ENCAP
+
+        # set dial mode
+        log_isdnctrl dialmode $slave $SLAVE_DIALMODE
+
+        [ -n "$SECURE" ] && log_isdnctrl secure $slave $SECURE
+        [ -n "$SLAVE_HUPTIMEOUT" ] && log_isdnctrl huptimeout $slave $SLAVE_HUPTIMEOUT
+        [ -n "$SLAVE_CHARGEHUP" ] && log_isdnctrl chargehup $slave $SLAVE_CHARGEHUP
+        [ -n "$SLAVE_CHARGEINT" ] && log_isdnctrl chargeint $slave $SLAVE_CHARGEINT
+        [ -n "$SLAVE_IHUP" ] && log_isdnctrl ihup $slave $SLAVE_IHUP
+        [ -n "$SLAVE_DIALMAX" ] && log_isdnctrl dialmax $slave $SLAVE_DIALMAX
+
+        # set callback
+        [ -n "$SLAVE_CBHUP" ] && log_isdnctrl cbhup $slave $SLAVE_CBHUP
+        [ -n "$SLAVE_CALLBACK" ] || SLAVE_CALLBACK="off"
+        log_isdnctrl callback $slave $SLAVE_CALLBACK
+        [ -n "$SLAVE_CBDELAY" ] && log_isdnctrl cbdelay $DEVICE $SLAVE_CBDELAY
+
+        # options for master device
+        [ -n "$SLAVE_DELAY" ] && log_isdnctrl sdelay $DEVICE $SLAVE_DELAY
+        [ -n "$SLAVE_TRIGGER" ] && log_isdnctrl trigger $DEVICE $SLAVE_TRIGGER
+    fi
+
+    if [ "$GATEWAY" = "0.0.0.0" ]; then
+        if [ "$DIALIN" != "on" ]; then
+            options="$options ipcp-accept-remote"
+        fi
+        options="$IPADDR:$GATEWAY $options"
+    else
+        options="$options $IPADDR:$GATEWAY"
+    fi
+
+    # Van Jacobson style TCP/IP header compression and
+    # VJ connection-ID compression
+    [ "$VJ" = "off" ] && options="$options -vj"
+    [ "$VJCCOMP" = "off" ] && options="$options -vjccomp"
+
+    # Address/Control compression, protocol field compression,
+    [ "$AC" = "off" ] && options="$options -ac"
+    [ "$PC" = "off" ] && options="$options -pc"
+
+    # BSD-Compression scheme
+    if [ "$BSDCOMP" = "on" ] ; then
+        options="$options bsdcomp 9,9"
+    else
+        options="$options -bsdcomp"
+    fi
+    # Stac compression
+    if [ "$LZS" = "on" ] ; then
+        # supports LZS check mode 3 and 4
+        [ -n "$LZS_MODE" ] || LZS_MODE="4"
+        [ "$LZS_MODE" = "3" ] && options="$options lzs 1"
+        [ "$LZS_MODE" = "4" ] && options="$options lzs 1:4"
+    fi
+
+    # Set max receive and max transmit units
+    [ -n "$MRU" ] && options="$options mru $MRU"
+    [ -n "$MTU" ] && options="$options mtu $MTU"
+
+    # set CBCP protocoll
+    if [ "$CBCP" = "on" ] ; then
+        if [ -n "$CBCP_MSN" ] ; then
+            # User managed callback
+            options="$options callback $CBCP_MSN"
+        else
+            # admin managed callback, it's enabled by default
+            options="$options callback 6"
+        fi
+    else
+        # Disable CBCP
+        options="$options -callback-cbcp"
+    fi
+
+    # set CCP protocoll
+    [ "$CCP" = "off" ] && options="$options noccp"
+
+    # set host name
+    [ -n "$ISDN_HOSTNAME" ] && options="$options remotename $ISDN_HOSTNAME"
+
+    # Set authentication
+    for i in $AUTH ; do
+        options="$options $i"
+    done
+
+    # add ppp options
+    for i in $PPPOPTIONS ; do
+        options="$options $i"
+    done
+
+    # check dns entry
+    if [ -z "$DNS1" -a -z "$DNS2" ]; then
+        options="$options ms-get-dns"
+    else
+        [ -n "$DNS1" ] && options="$options ms-dns $DNS1"
+        [ -n "$DNS2" ] && options="$options ms-dns $DNS2"
+    fi
+
+    # set debug 
+    [ "$DEBUG" = "yes" ] && options="-d $options"
+
+    # set netmask, if available
+    [ -n "$NETMASK" ] && {
+        val=$(ipcalc --prefix $IPADDR $NETMASK)
+        pfx=${val##PREFIX=}
+    }
+    # activate ISDN device
+    /usr/bin/logger -p daemon.info -t ifup-ippp "ip addr add $IPADDR peer $GATEWAY${pfx:/$pfx} dev $DEVICE"
+    ip addr add $IPADDR peer $GATEWAY${pfx:/$pfx} dev $DEVICE
+    ip link set dev $DEVICE up
+
+    if [ "$ENCAP" = "syncppp" ]; then
+        # start ipppd daemon
+        /usr/bin/logger -p daemon.info -t ifup-ippp "ipppd $options $netmask"
+        ipppd $options $netmask >/dev/null 2>&1
+
+        # start ibod daemon
+        if [ "$DIALIN" != "on" ]; then
+            [ "$BUNDLING" = "yes" -o "$BUNDLING" = "on" ] && [ -n "$SLAVE_DEVICE" ] && start_ibod $DEVICE
+        fi
+    fi
+
+    # set default gateway for dial on demand
+    if [ "$DIALMODE" = "auto" ] ; then
+        echo 1 > /proc/sys/net/ipv4/ip_dynaddr
+        if  [ "$DEFROUTE" = "yes" ] ; then
+            if [ "$GATEWAY" = "0.0.0.0" ]; then
+                ip route replace default ${METRIC:+metric $METRIC} dev ${DEVICE} >/dev/null 2>&1
+            else
+                ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY} dev ${DEVICE} >/dev/null 2>&1
+            fi
+        fi
+    fi
+
+    # Setup IPv6
+    if ! is_false "$IPV6INIT" && ! [[ -z "$IPV6ADDR" ]]; then
+        # Native IPv6 use of device configured, check of encapsulation required    
+        if [ "$ENCAP" = "syncppp" ]; then
+            echo $"Warning: ipppd (kernel 2.4.x and below) doesn't support IPv6 using encapsulation 'syncppp'"
+        elif [ "$ENCAP" = "rawip" ]; then
+            echo $"Warning: link doesn't support IPv6 using encapsulation 'rawip'"
+        fi
+    fi
+    /etc/sysconfig/network-scripts/ifup-ipv6 $CONFIG
+}
+
+addprovider || exit 1
+
+exit 0

sysconfig/network-scripts/ifup-ipv6

@@ -0,0 +1,316 @@
+#!/bin/bash
+#
+# ifup-ipv6
+#
+#
+# Taken from:
+# (P) & (C) 2000-2006 by Peter Bieringer <pb@bieringer.de>
+#
+#  You will find more information on the initscripts-ipv6 homepage at
+#   http://www.deepspace6.net/projects/initscripts-ipv6.html
+#
+# RHL integration assistance by Pekka Savola <pekkas@netcore.fi>
+#
+# Version: 2006-07-20
+#
+# Note: if called (like normally) by /etc/sysconfig/network-scripts/ifup
+#        exit codes aren't handled by "ifup"
+#
+# Uses following information from "/etc/sysconfig/network":
+#  IPV6_DEFAULTDEV=<device>: controls default route (optional)
+#  IPV6_DEFAULTGW=<address>: controls default route (optional)
+#
+# Uses following information from "/etc/sysconfig/network-scripts/ifcfg-$1":
+#  IPV6INIT=yes|no: controls IPv6 configuration for this interface
+#  IPV6ADDR=<IPv6 address>[/<prefix length>]: specify primary static IPv6 address
+#  IPV6ADDR_SECONDARIES="<IPv6 address>[/<prefix length>] ..." (optional)
+#  IPV6_ROUTER=yes|no: controls IPv6 autoconfiguration (no: multi-homed interface without routing)
+#  IPV6_AUTOCONF=yes|no: controls IPv6 autoconfiguration
+#   defaults:
+#    IPV6FORWARDING=yes: IPV6_AUTOCONF=no, IPV6_ROUTER=yes
+#    IPV6FORWARDING=no: IPV6_AUTOCONF=yes
+#  IPV6_MTU=<MTU for IPv6>: controls IPv6 MTU for this link (optional)
+#  IPV6_PRIVACY="rfc3041": control IPv6 privacy (optional)
+#    This script only supports "rfc3041" (if kernel supports it)
+#
+# Optional for 6to4 tunneling (hardwired name of tunnel device is "tun6to4"):
+#  IPV6TO4INIT=yes|no: controls 6to4 tunneling setup
+#  IPV6TO4_RELAY=<IPv4 address>: IPv4 address of the remote 6to4 relay (default: 192.88.99.1)
+#  IPV6TO4_MTU=<MTU for IPv6>: controls IPv6 MTU for the 6to4 link (optional, default is MTU of interface - 20)
+#  IPV6TO4_IPV4ADDR=<IPv4 address>: overwrite local IPv4 address (optional)
+#  IPV6TO4_ROUTING="<device>-<suffix>/<prefix length> ...": information to setup additional interfaces
+#    Example: IPV6TO4_ROUTING="eth0-:f101::1/64 eth1-:f102::1/64"
+#
+# Optional for 6to4 tunneling to trigger radvd:
+#  IPV6_CONTROL_RADVD=yes|no: controls radvd triggering (optional)
+#  IPV6_RADVD_PIDFILE=<file>: PID file of radvd for sending signals, default is "/run/radvd/radvd.pid" (optional)
+#  IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd (optional, default is SIGHUP)
+#
+#  Required version of radvd to use 6to4 prefix recalculation
+#   0.6.2p3 or newer supporting option "Base6to4Interface"
+#  Required version of radvd to use dynamic ppp links
+#   0.7.0 + fixes or newer
+#
+
+
+. /etc/sysconfig/network
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+CONFIG=$1
+[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
+source_config
+
+REALDEVICE=${DEVICE%%:*}
+DEVICE=$REALDEVICE
+
+# Test whether IPv6 configuration is disabled for this interface
+is_false "$IPV6INIT" && exit 0
+
+[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1
+. /etc/sysconfig/network-scripts/network-functions-ipv6
+
+
+# IPv6 test, module loaded, exit if system is not IPv6-ready
+ipv6_test || exit 1
+
+# Test device status
+ipv6_test_device_status $DEVICE
+if [ $? != 0 -a $? != 11 ]; then
+    # device doesn't exist or other problem occurs
+    exit 1
+fi
+
+# Setup IPv6 address on specified interface
+if [ -n "$IPV6ADDR" ]; then
+    ipv6_add_addr_on_device $DEVICE $IPV6ADDR || exit 1
+fi
+
+# Get current global IPv6 forwarding
+ipv6_global_forwarding_current="$(/sbin/sysctl -e -n net.ipv6.conf.all.forwarding)"
+
+# Set some proc switches depending on defines
+if [ "$IPV6FORWARDING" = "yes" ]; then
+    # Global forwarding should be enabled
+
+    # Check, if global IPv6 forwarding was already set by global script
+    if [ $ipv6_global_forwarding_current -ne 1 ]; then
+        net_log $"Global IPv6 forwarding is enabled in configuration, but not currently enabled in kernel"
+        net_log $"Please restart network with '/sbin/service network restart'"
+    fi
+
+    ipv6_local_forwarding=1
+    ipv6_local_auto=0
+    ipv6_local_accept_ra=0
+    if [ "$IPV6_ROUTER" = "no" ]; then
+        ipv6_local_forwarding=0
+    fi
+    if [ "$IPV6_AUTOCONF" = "yes" ]; then
+        ipv6_local_auto=1
+        ipv6_local_accept_ra=2
+    fi
+else
+    # Global forwarding should be disabled
+
+    # Check, if global IPv6 forwarding was already set by global script
+    if [ $ipv6_global_forwarding_current -ne 0 ]; then
+        net_log $"Global IPv6 forwarding is disabled in configuration, but not currently disabled in kernel"
+        net_log $"Please restart network with '/sbin/service network restart'"
+    fi
+
+    ipv6_local_forwarding=0
+    ipv6_local_auto=1
+    ipv6_local_accept_ra=1
+    if [ "$IPV6_AUTOCONF" = "no" ]; then
+        ipv6_local_auto=0
+        if [ ! "$IPV6_FORCE_ACCEPT_RA" = "yes" ]; then
+            ipv6_local_accept_ra=0
+        fi
+    fi
+fi
+
+if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then
+    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=$ipv6_local_forwarding >/dev/null 2>&1
+    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=$ipv6_local_accept_ra >/dev/null 2>&1
+    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=$ipv6_local_auto >/dev/null 2>&1
+    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.autoconf=$ipv6_local_auto >/dev/null 2>&1
+fi
+
+# Set IPv6 MTU, if given
+if [ -n "$IPV6_MTU" ]; then
+    ipv6_set_mtu $DEVICE $IPV6_MTU
+fi
+
+# Setup additional IPv6 addresses from list, if given
+if [ -n "$IPV6ADDR_SECONDARIES" ]; then
+    for ipv6addr in $IPV6ADDR_SECONDARIES; do
+        ipv6_add_addr_on_device $DEVICE $ipv6addr
+    done
+fi
+
+# Enable IPv6 RFC3041 privacy extensions if desired
+if [ "$IPV6_PRIVACY" = "rfc3041" ]; then
+    if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then
+        /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.use_tempaddr=2 >/dev/null 2>&1
+        if [ $? -ne 0 ]; then
+            net_log $"Cannot enable IPv6 privacy method '$IPV6_PRIVACY', not supported by kernel"
+        fi
+    fi
+fi
+
+# Setup default IPv6 route, check are done by function
+if [ -n "$IPV6_DEFAULTDEV" -o -n "$IPV6_DEFAULTGW" ]; then
+    ipv6_set_default_route "$IPV6_DEFAULTGW" "$IPV6_DEFAULTDEV" "$DEVICE"
+fi
+
+# Setup additional static IPv6 routes on specified interface, if given
+if [ -f /etc/sysconfig/static-routes-ipv6 ]; then
+    LC_ALL=C grep -w "^$DEVICE" /etc/sysconfig/static-routes-ipv6 | while read device args; do
+        ipv6_add_route $args $DEVICE
+    done
+fi
+
+# Setup of 6to4, if configured
+if [ "$IPV6TO4INIT" = "yes" ]; then
+    valid6to4config="yes"
+
+    # Test device status of 6to4 tunnel
+    ipv6_test_device_status tun6to4
+    if [ $? = 0 ]; then
+        # device is already up
+        net_log $"Device 'tun6to4' (from '$DEVICE') is already up, shutdown first"
+        exit 1
+    fi
+
+    # Get IPv4 address for global 6to4 prefix calculation
+    if [ -n "$IPV6TO4_IPV4ADDR" ]; then
+        # Take special configured from config file (precedence 1)
+        ipv4addr="$IPV6TO4_IPV4ADDR"
+
+        # Get local IPv4 address from interface
+        ipv4addrlocal="$(ipv6_get_ipv4addr_of_device $DEVICE)"
+        if [ -z "$ipv4addrlocal" ]; then
+            # Take configured from config file
+            ipv4addrlocal="$IPADDR"
+        fi
+    else
+        # Get IPv4 address from interface first (has precedence 2)
+        ipv4addr="$(ipv6_get_ipv4addr_of_device $DEVICE)"
+        if [ -z "$ipv4addr" ]; then
+            # Take configured from config file (precedence 3)
+            ipv4addr="$IPADDR"
+        fi
+        ipv4addrlocal="$ipv4addr"
+    fi
+
+    if [ -n "$ipv4addr" ]; then
+        if ! ipv6_test_ipv4_addr_global_usable $ipv4addr; then
+            net_log $"Given IPv4 address '$ipv4addr' is not globally usable" info
+            valid6to4config="no"
+        fi
+        if [ -z "$IPV6TO4_RELAY" ]; then
+            IPV6TO4_RELAY="192.88.99.1"
+        fi
+
+        # Check/generate relay address
+        ipv6to4_relay="$(ipv6_create_6to4_relay_address $IPV6TO4_RELAY)"
+        if [ $? -ne 0 ]; then
+            valid6to4config="no"
+        fi
+    else
+        net_log $"IPv6to4 configuration needs an IPv4 address on related interface or otherwise specified" info
+        valid6to4config="no"
+    fi
+
+    # Setup 6to4 tunnel (hardwired name is "tun6to4"), if config is valid
+    if [ "$valid6to4config" = "yes" ]; then
+        # Get MTU of master device
+        ipv4mtu="$(/sbin/ip link show dev $DEVICE | awk '/\<mtu\>/ { print $5 }')"
+        if [ -n "$ipv4mtu" ]; then
+            # IPv6 tunnel MTU is IPv4 MTU minus 20 for IPv4 header
+            tunnelmtu=$(($ipv4mtu-20))
+        fi
+
+        if [ -n "$IPV6TO4_MTU" ]; then
+            if [ $IPV6TO4_MTU -gt $tunnelmtu ]; then
+                net_log $"Warning: configured MTU '$IPV6TO4_MTU' for 6to4 exceeds maximum limit of '$tunnelmtu', ignored" warning
+            else
+                tunnelmtu=$IPV6TO4_MTU
+            fi
+        fi
+
+        ipv6_add_6to4_tunnel tun6to4 $ipv4addr "" $tunnelmtu $ipv4addrlocal || exit 1
+
+        # Add route to for compatible addresses (removed later again)
+        ipv6_add_route "::/96" "::" tun6to4
+
+        # Add default route, if device matches
+        if [ "$IPV6_DEFAULTDEV" = "tun6to4" ]; then
+            if [ -n "$IPV6_DEFAULTGW" ]; then
+                net_log $"Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored" warning
+            fi
+            ipv6_set_default_route $ipv6to4_relay tun6to4
+        fi
+
+        # Add static routes
+        if [ -f /etc/sysconfig/static-routes-ipv6 ]; then
+            LC_ALL=C grep -w "^tun6to4" /etc/sysconfig/static-routes-ipv6 | while read device network gateway; do
+                if [ -z "$network" ]; then
+                    continue
+                fi
+                if [ -z "$gateway" ]; then
+                    gateway="$ipv6to4_relay"
+                fi
+                ipv6_add_route $network $gateway tun6to4
+            done
+        fi
+
+        # Setup additional static IPv6 routes (newer config style)
+        if [ -f "/etc/sysconfig/network-scripts/route6-tun6to4" ]; then
+            sed -ne 's/#.*//' -e '/[^[:space:]]/p' /etc/sysconfig/network-scripts/route6-tun6to4 | while read line; do
+                if echo "$line" | LC_ALL=C grep -vq 'via'; then
+                    # Add gateway if missing
+                    line="$line via $ipv6to4_relay"
+                fi
+                /sbin/ip -6 route add $line
+            done
+        fi
+
+        # Cleanup autmatically generated autotunnel (not needed for 6to4)
+        /sbin/ip -6 route del ::/96 dev tun6to4
+        /sbin/ip -6 addr del "::$ipv4addrlocal/128" dev tun6to4
+
+        if [ "$IPV6_CONTROL_RADVD" = "yes" ]; then
+            # RADVD is in use, so forwarding of IPv6 packets should be enabled, display warning
+            if [ $ipv6_global_forwarding_current -ne 1 ]; then
+                net_log $"Using 6to4 and RADVD IPv6 forwarding usually should be enabled, but it isn't" warning
+            fi
+
+            if [ -n "$IPV6TO4_ROUTING" ]; then
+                ipv6to4prefix="$(ipv6_create_6to4_prefix $ipv4addr)"
+                if [ -n "$ipv6to4prefix" ]; then
+                    # Add route to local networks
+                    for devsuf in $IPV6TO4_ROUTING; do
+                        dev="${devsuf%%-*}"
+                        suf="$(echo $devsuf | awk -F- '{ print $2 }')"
+                        ipv6_add_addr_on_device ${dev} ${ipv6to4prefix}${suf}
+                    done
+                else
+                    net_log $"Error occurred while calculating the IPv6to4 prefix"
+                fi
+            else
+                net_log $"radvd control enabled, but config is not complete"
+            fi
+
+            # Control running radvd
+            ipv6_trigger_radvd up "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE
+        fi
+    else
+        net_log $"6to4 configuration is not valid"
+        exit 1
+    fi
+fi
+
+#wait for all global IPv6 addresses to leave the "tentative" state
+ipv6_wait_tentative $DEVICE

sysconfig/network-scripts/ifup-isdn

@@ -0,0 +1 @@
+ifup-ippp

sysconfig/network-scripts/ifup-plip

@@ -0,0 +1,27 @@
+#!/bin/sh
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+CONFIG=$1
+source_config
+
+if [ "foo$2" = "fooboot" -a "${ONBOOT}" = "no" ]; then
+    exit
+fi
+
+[ -z "$PREFIX" ] && eval $(/bin/ipcalc --prefix ${IPADDR} ${NETMASK})
+ip addr add ${IPADDR} peer ${REMIP}/${PREFIX} dev ${DEVICE}
+ip link set up dev ${DEVICE}
+ip route add ${NETWORK} dev ${DEVICE}
+
+. /etc/sysconfig/network
+
+if [ "${GATEWAY}" != "" ]; then
+    if [ "${GATEWAYDEV}" = "" -o "${GATEWAYDEV}" = "${DEVICE}" ]; then
+        # set up default gateway
+        ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY}
+    fi
+fi
+
+/etc/sysconfig/network-scripts/ifup-post $1

sysconfig/network-scripts/ifup-plusb

@@ -0,0 +1,43 @@
+#!/bin/sh
+#
+# /etc/sysconfig/network-scripts/ifup-plusb
+#
+# the plusb network driver is a USB host-host cable based on the Prolific
+# chip. It works a lot like the plip driver.  
+#
+# To get the plusb module to load automatically at boot, you will need to
+# add the following lines to /etc/conf.modules:
+#
+# alias plusb0 plusb
+#
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+CONFIG=$1
+source_config
+
+if [ "foo$2" = "fooboot" -a "${ONBOOT}" = "no" ]
+then
+    exit
+fi
+
+[ -z "$PREFIX" ] && eval $(/bin/ipcalc --prefix ${IPADDR} ${NETMASK})
+
+if [ ${BROADCAST} != ""  ]  ; then
+    ip addr add ${IPADDR} peer ${REMIP}/${PREFIX} broadcast ${BROADCAST} dev ${DEVICE}
+else
+    ip addr add ${IPADDR} peer ${REMIP}/${PREFIX} dev ${DEVICE}
+fi
+ip link set up dev ${DEVICE}
+
+. /etc/sysconfig/network
+
+if [ "${GATEWAY}" != "" ]; then
+    if [ "${GATEWAYDEV}" = "" -o "${GATEWAYDEV}" = "${DEVICE}" ]; then
+        # set up default gateway
+        ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY}
+    fi
+fi
+
+/etc/sysconfig/network-scripts/ifup-post $1

sysconfig/network-scripts/ifup-post

@@ -0,0 +1,148 @@
+#!/bin/bash
+
+# Source the general functions for is_true() and is_false():
+. /etc/init.d/functions
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+[ -f ../network ] && . ../network
+
+unset REALDEVICE
+if [ "$1" = --realdevice ] ; then
+    REALDEVICE=$2
+    shift 2
+fi
+
+CONFIG=$1
+source_config
+
+[ -z "$REALDEVICE" ] && REALDEVICE=$DEVICE
+
+if is_false "$ISALIAS"; then
+    /etc/sysconfig/network-scripts/ifup-aliases ${DEVICE} ${CONFIG}
+fi
+
+if ! is_true "$NOROUTESET"; then
+    /etc/sysconfig/network-scripts/ifup-routes ${REALDEVICE} ${DEVNAME}
+fi
+
+
+if ! is_false "${PEERDNS}" || is_true "${RESOLV_MODS}"; then
+    # Obtain the DNS entries when using PPP if necessary:
+    [ -n "${MS_DNS1}" ] && DNS1="${MS_DNS1}"
+    [ -n "${MS_DNS2}" ] && DNS2="${MS_DNS2}"
+
+    # Remove duplicate DNS entries and shift them, if necessary:
+    update_DNS_entries
+
+    # Determine what regexp we should use (for testing below):
+    if   [ -n "${DNS3}" ]; then
+        grep_regexp="[^#]?nameserver[[:space:]]+${DNS1}[^#]?nameserver[[:space:]]+${DNS2}[^#]?nameserver[[:space:]]+${DNS3}"
+    elif [ -n "${DNS2}" ]; then
+        grep_regexp="[^#]?nameserver[[:space:]]+${DNS1}[^#]?nameserver[[:space:]]+${DNS2}"
+    elif [ -n "${DNS1}" ]; then
+        grep_regexp="[^#]?nameserver[[:space:]]+${DNS1}"
+    else
+        # No DNS entries used at all ->> match everything.
+        grep_regexp=".*"
+    fi
+
+    # Test if the search field needs updating, or
+    # if the nameserver entries order should be updated:
+    if [ -n "${DOMAIN}" ] && ! grep -q "^search.*${DOMAIN}.*$" /etc/resolv.conf ||
+        ! tr --delete '\n' < /etc/resolv.conf | grep -E -q "${grep_regexp}"; then
+
+        if tmp_file=$(mktemp); then
+            search_str=''
+
+            while read line; do
+                case ${line} in
+
+                    # Skip nameserver entries when at least one DNS option was given
+                    # (at this stage we know that we have to update all the nameserver
+                    # enries anyway -- see below), or copy them if we are changing just
+                    # the 'search' field in /etc/resolv.conf:
+                    nameserver*)
+                        if [[ "${grep_regexp}" != ".*" ]]; then
+                            continue
+                        else
+                            echo "${line}" >> "${tmp_file}"
+                        fi
+                        ;;
+
+                    domain* | search*)
+                        if [ -n "${DOMAIN}" ]; then
+                            read search value < <(echo ${line})
+                            search_str+=" ${value}"
+                        else
+                            echo "${line}" >> "${tmp_file}"
+                        fi
+                        ;;
+
+                    # Keep the rest of the /etc/resolv.conf as it was:
+                    *)
+                        echo "${line}" >> "${tmp_file}"
+                        ;;
+                esac
+            done < /etc/resolv.conf
+
+            # Insert the domain into 'search' field:
+            if [ -n "${DOMAIN}" ]; then
+                echo "search ${DOMAIN}${search_str}" >> "${tmp_file}"
+            fi
+
+            # Add the requested nameserver entries:
+            [ -n "${DNS1}" ] && echo "nameserver ${DNS1}" >> "${tmp_file}"
+            [ -n "${DNS2}" ] && echo "nameserver ${DNS2}" >> "${tmp_file}"
+            [ -n "${DNS3}" ] && echo "nameserver ${DNS3}" >> "${tmp_file}"
+
+            # Backup resolv.conf only if it doesn't exist already:
+            ! [ -f /etc/resolv.conf.save ] && cp -af /etc/resolv.conf /etc/resolv.conf.save
+
+            # Maintain permissions, but set umask in case it doesn't exist:
+            umask_old=$(umask)
+            umask 022
+
+            # Update the resolv.conf:
+            change_resolv_conf "${tmp_file}"
+
+            rm -f "${tmp_file}"
+            umask ${umask_old}
+            unset tmp_file search_str umask_old
+        else
+            net_log $"/etc/resolv.conf was not updated: failed to create temporary file" 'err' 'ifup-post'
+        fi
+    fi
+
+    unset grep_regexp
+fi
+
+# don't set hostname on ppp/slip connections
+if [ "$2" = "boot" -a \
+        "${DEVICE}" != lo -a \
+        "${DEVICETYPE}" != "ppp" -a \
+        "${DEVICETYPE}" != "slip" ]; then
+    if need_hostname; then
+        IPADDR=$(LANG=C ip -o -4 addr ls dev ${DEVICE} | awk '{ print $4 ; exit }')
+        eval $(/bin/ipcalc --silent --hostname ${IPADDR} ; echo "status=$?")
+        if [ "$status" = "0" ]; then
+            set_hostname $HOSTNAME
+        fi
+    fi
+fi
+
+# Set firewall ZONE for this device (empty ZONE means default):
+if [ "${REALDEVICE}" != "lo" ]; then
+    dbus-send --print-reply --system --dest=org.fedoraproject.FirewallD1 \
+              /org/fedoraproject/FirewallD1 \
+              org.fedoraproject.FirewallD1.zone.changeZoneOfInterface \
+              string:"${ZONE}" string:"${DEVICE}" \
+              > /dev/null 2>&1
+fi
+
+if [ -x /sbin/ifup-local ]; then
+    /sbin/ifup-local ${DEVICE}
+fi
+
+exit 0

sysconfig/network-scripts/ifup-routes

@@ -0,0 +1,76 @@
+#! /bin/bash
+#
+# adds static routes which go through device $1
+
+if [ -z "$1" ]; then
+    echo $"usage: ifup-routes <net-device> [<nickname>]"
+    exit 1
+fi
+
+MATCH='^[[:space:]]*(\#.*)?$'
+
+handle_file () {
+    . $1
+    routenum=0
+    while [ "x$(eval echo '$'ADDRESS$routenum)x" != "xx" ]; do
+        eval $(ipcalc -p $(eval echo '$'ADDRESS$routenum) $(eval echo '$'NETMASK$routenum))
+        line="$(eval echo '$'ADDRESS$routenum)/$PREFIX"
+        if [ "x$(eval echo '$'GATEWAY$routenum)x" != "xx" ]; then
+            line="$line via $(eval echo '$'GATEWAY$routenum)"
+        fi
+        line="$line dev $2"
+        /sbin/ip route add $line
+        routenum=$(($routenum+1))
+    done
+}
+
+handle_ip_file() {
+    local f t type= file=$1 proto="-4"
+    f=${file##*/}
+    t=${f%%-*}
+    type=${t%%6}
+    if [ "$type" != "$t" ]; then
+        proto="-6"
+    fi
+    { cat "$file" ; echo ; } | while read line; do
+        if [[ ! "$line" =~ $MATCH ]]; then
+            /sbin/ip $proto $type add $line
+        fi
+    done
+}
+
+FILES="/etc/sysconfig/network-scripts/route-$1 /etc/sysconfig/network-scripts/route6-$1"
+if [ -n "$2" -a "$2" != "$1" ]; then
+    FILES="$FILES /etc/sysconfig/network-scripts/route-$2 /etc/sysconfig/network-scripts/route6-$2"
+fi
+
+for file in $FILES; do
+    if [ -f "$file" ]; then
+        if grep -Eq '^[[:space:]]*ADDRESS[0-9]+=' $file ; then
+            # new format
+            handle_file $file ${1%:*}
+        else
+            # older format
+            handle_ip_file $file
+        fi
+    fi
+done
+
+
+# Red Hat network configuration format
+NICK=${2:-$1}
+CONFIG="/etc/sysconfig/network-scripts/$NICK.route"
+[ -f $CONFIG ] && handle_file $CONFIG $1
+
+
+# Routing rules
+FILES="/etc/sysconfig/network-scripts/rule-$1 /etc/sysconfig/network-scripts/rule6-$1"
+if [ -n "$2" -a "$2" != "$1" ]; then
+    FILES="$FILES /etc/sysconfig/network-scripts/rule-$2 /etc/sysconfig/network-scripts/rule6-$2"
+fi
+
+for file in $FILES; do
+    if [ -f "$file" ]; then
+        handle_ip_file $file
+    fi
+done

sysconfig/network-scripts/ifup-sit

@@ -0,0 +1,108 @@
+#!/bin/bash
+#
+# ifup-sit
+#
+#
+# Taken from:
+# (P) & (C) 2000-2003 by Peter Bieringer <pb@bieringer.de>
+#
+#  You will find more information on the initscripts-ipv6 homepage at
+#   http://www.deepspace6.net/projects/initscripts-ipv6.html
+#
+# RHL integration assistance by Pekka Savola <pekkas@netcore.fi>
+#
+# Version: 2003-09-08
+#
+# Uses following information from /etc/sysconfig/network:
+#  IPV6_DEFAULTDEV=<device>: controls default route (optional)
+#  IPV6_DEFAULTGW=<address>: controls default route (optional)
+#
+# Uses following information from /etc/sysconfig/network-scripts/ifcfg-$1:
+#  DEVICE=<device>
+#  IPV6INIT=yes|no: controls IPv6 configuration for this interface
+#  IPV6_MTU=<MTU for IPv6>: controls IPv6 MTU for this link (optional)
+#
+#  For static tunnels
+#  IPV6TUNNELIPV4=<IPv4 address>: IPv4 address of remote tunnel endpoint
+#  IPV6TUNNELIPV4LOCAL=<IPv4 address>: (optional) local IPv4 address of tunnel
+#  IPV6ADDR=<IPv6 address>[/<prefix length>]: (optional) local IPv6 address of a numbered tunnel
+#  IPV6ADDR_SECONDARIES="<IPv6 address>[/<prefix length>] ..." (optional) additional local IPv6 addresses
+#
+
+
+. /etc/sysconfig/network
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+CONFIG=$1
+[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
+source_config
+
+# IPv6 don't need aliases anymore, config is skipped
+REALDEVICE=${DEVICE%%:*}
+[ "$DEVICE" != "$REALDEVICE" ] && exit 0
+
+# Test whether IPv6 configuration is disabled for this interface
+is_false "$IPV6INIT" && exit 0
+
+[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1
+. /etc/sysconfig/network-scripts/network-functions-ipv6
+
+
+# IPv6 test, module loaded, exit if system is not IPv6-ready
+ipv6_test || exit 1
+
+# Generic tunnel device sit0 is not supported here
+if [ "$DEVICE" = "sit0" ]; then
+    net_log $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking"
+    exit 1
+fi
+
+if [ -z "$IPV6TUNNELIPV4" ]; then
+    net_log $"Missing remote IPv4 address of tunnel, configuration is not valid"
+    exit 1
+fi
+
+# Test device status
+ipv6_test_device_status $DEVICE
+if [ $? = 0 ]; then
+    # device is already up
+    net_log $"Device '$DEVICE' is already up, please shutdown first"
+    exit 1
+fi
+
+# Create tunnel
+ipv6_add_tunnel_device $DEVICE $IPV6TUNNELIPV4 "" $IPV6TUNNELIPV4LOCAL || exit 1
+
+# Set IPv6 MTU, if given
+if [ -n "$IPV6_MTU" ]; then
+    ipv6_set_mtu $DEVICE $IPV6_MTU
+fi
+
+# Apply local IPv6 address, if given (numbered tunnel)
+if [ -n "$IPV6ADDR" ]; then
+    ipv6_add_addr_on_device $DEVICE $IPV6ADDR
+fi
+
+# Setup additional IPv6 addresses from list, if given
+if [ -n "$IPV6ADDR_SECONDARIES" ]; then
+    for ipv6addr in $IPV6ADDR_SECONDARIES; do
+        ipv6_add_addr_on_device $DEVICE $ipv6addr
+    done
+fi
+
+# Setup default IPv6 route, check are done by function
+if [ -n "$IPV6_DEFAULTDEV" -o -n "$IPV6_DEFAULTGW" ]; then
+    ipv6_set_default_route "$IPV6_DEFAULTGW" "$IPV6_DEFAULTDEV" "$DEVICE"
+fi
+
+# Setup additional static IPv6 routes on specified interface, if given
+if [ -f /etc/sysconfig/static-routes-ipv6 ]; then
+    LC_ALL=C grep -w "^$DEVICE" /etc/sysconfig/static-routes-ipv6 | while read device ipv6route args; do
+    ipv6_add_route $ipv6route :: $DEVICE
+done
+fi
+
+# Setup static routes
+/etc/sysconfig/network-scripts/ifup-routes ${REALDEVICE}

sysconfig/network-scripts/ifup-tunnel

@@ -0,0 +1,99 @@
+#!/bin/bash
+# Copyright (C) 1996-2009 Red Hat, Inc. all rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License, version 2,
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Thanks to:
+#  - Razvan Corneliu C.R. Vilt <razvan.vilt@linux360.ro>
+#  - Aaron Hope <aaron.hope@unh.edu>
+#  - Sean Millichamp <sean@enertronllc.com>
+# for providing the scripts this one is based on
+
+. /etc/init.d/functions
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+CONFIG=$1
+need_config "$CONFIG"
+source_config
+
+if [ "$PEER_OUTER_IPADDR" = "$PEER_INNER_IPADDR" ]; then
+    # Specifying PEER_INNER_IPADDR would automatically add a route to the peer
+    # through the tunnel, redirecting tunnel packets back to the tunnel and
+    # creating a dead loop.
+    unset PEER_INNER_IPADDR
+fi
+
+case "$TYPE" in
+GRE)
+    MODE=gre
+    proto=-4
+    /sbin/modprobe ip_gre
+    ;;
+GRE6)
+    MODE=ip6gre
+    proto=-6
+    /sbin/modprobe ip6_gre
+    ;;
+IPIP)
+    MODE=ipip
+    proto=-4
+    /sbin/modprobe ipip
+    ;;
+IPIP6|EXTERNAL)
+    MODE=ipip6
+    proto=-6
+    /sbin/modprobe ip6_tunnel
+    ;;
+*)
+    net_log $"Invalid tunnel type $TYPE"
+    exit 1
+    ;;
+esac
+
+# Generic tunnel devices are not supported here
+if [ "$DEVICE" = gre0 -o "$DEVICE" = tunl0 -o "$DEVICE" = ip6tnl0 ]; then
+    net_log $"Device '$DEVICE' isn't supported as a valid GRE device name."
+    exit 1
+fi
+
+# Create the tunnel
+# The outer addresses are those of the underlying (public) network.
+if [ "$TYPE" = 'EXTERNAL' ]; then
+  /sbin/ip link add "$DEVICE" type ip6tnl external
+else
+  /sbin/ip $proto tunnel add "$DEVICE" mode "$MODE" \
+      ${MY_OUTER_IPADDR:+local "$MY_OUTER_IPADDR"} \
+      ${PEER_OUTER_IPADDR:+remote "$PEER_OUTER_IPADDR"} \
+      ${KEY:+key "$KEY"} ${TTL:+ttl "$TTL"}
+fi
+
+if [ -n "$MTU" ]; then
+    /sbin/ip link set "$DEVICE" mtu "$MTU"
+fi
+
+# The inner address are used mainly for communication between a gateway
+# and a private network.  When the peer is configured with an inner address
+# contained in the peer's private network or identical to it's public address,
+# it need not be specified.
+/sbin/ip addr add "$MY_INNER_IPADDR" dev "$DEVICE" \
+    ${PEER_INNER_IPADDR:+peer "$PEER_INNER_IPADDR"}
+
+/sbin/ip link set dev "$DEVICE" up
+
+# IPv6 initialisation?
+/etc/sysconfig/network-scripts/ifup-ipv6 ${CONFIG}
+
+exec /etc/sysconfig/network-scripts/ifup-post "$CONFIG" "$2"

sysconfig/network-scripts/ifup-wireless

@@ -0,0 +1,62 @@
+#!/bin/bash
+# Network Interface Configuration System
+# Copyright (c) 1996-2009 Red Hat, Inc. all rights reserved.
+#
+# Based on PCMCIA wireless script by (David Hinds/Jean Tourrilhes)
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License, version 2,
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# Configure wireless network device options.  See iw(8) for more info.
+# Valid variables:
+#    MODE: Ad-Hoc, Managed, etc.
+#    ESSID: Name of the wireless network
+#    FREQ: Frequency to operate on.  See CHANNEL
+#    KEY: Encryption key for WEP.
+
+# Only meant to be called from ifup.
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+IW=${IW:-iw}
+
+[ "$KEY" ] && KEYS="key d:0:$KEY"
+
+shopt -s nocasematch
+
+case "$MODE" in
+managed)
+    if [ "$ESSID" ]; then
+        $IW dev "$DEVICE" set type managed
+        $IW dev "$DEVICE" connect -w "$ESSID" $FREQ $KEYS
+    fi
+    ;;
+ad-hoc)
+    if [ -n "$ESSID" -a -n "$FREQ" ]; then
+        $IW dev "$DEVICE" set type ibss
+        $IW dev "$DEVICE" ibss join "$ESSID" "$FREQ" $KEYS
+    fi
+    ;;
+monitor)
+    if [ "$FREQ" ]; then 
+        $IW dev "$DEVICE" set type monitor
+        $IW dev "$DEVICE" set freq "$FREQ"
+    fi
+    ;;
+esac
+
+if [ -n "$WOWLAN" ] ; then
+    PHYDEVICE=$(phy_wireless_device $DEVICE)
+    iw phy $PHYDEVICE wowlan enable ${WOWLAN}
+fi

sysconfig/network-scripts/init.ipv6-global

@@ -0,0 +1,164 @@
+#!/bin/bash
+#
+# init.ipv6-global
+#
+#
+# Taken from: init.ipv6-global
+# (P) & (C) 2001-2005 by Peter Bieringer <pb@bieringer.de>
+#
+#  You will find more information on the initscripts-ipv6 homepage at
+#   http://www.deepspace6.net/projects/initscripts-ipv6.html
+#
+# RHL integration assistance by Pekka Savola <pekkas@netcore.fi>
+#
+# Version: 2005-01-04
+#
+# Calling parameters:
+#  $1: action (currently supported: start|stop|showsysctl)
+#  $2: position for start|stop (currently supported: pre|post)
+#
+# Called by hooks from /etc/[rc.d/]init.d/network
+#
+# Uses following information from /etc/sysconfig/network:
+#  IPV6FORWARDING=yes|no: controls global IPv6 forwarding (default: no)
+#  IPV6_AUTOCONF=yes|no: controls global automatic IPv6 configuration
+#   (default: yes if IPV6FORWARDING=no, no if IPV6FORWARDING=yes)
+#  IPV6_AUTOTUNNEL=yes|no: controls automatic IPv6 tunneling (default: no)
+#  IPV6_DEFAULTGW=<ipv6address[%interface]> [optional]
+#  IPV6_DEFAULTDEV=<interface> [optional]
+#
+
+. /etc/sysconfig/network
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+# Get action and hook position
+ACTION="$1"
+POSITION="$2"
+
+[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1
+. /etc/sysconfig/network-scripts/network-functions-ipv6
+
+# Initialize IPv6, depending on caller option
+case $ACTION in
+start)
+    case $POSITION in
+    pre)
+        # IPv6 test, module loaded, exit if system is not IPv6-ready
+        ipv6_test || exit 1
+
+        if [ "$IPV6FORWARDING" = "yes" ]; then
+            ipv6_global_forwarding=1
+            ipv6_global_auto=0
+        else
+            ipv6_global_forwarding=0
+            if [ "$IPV6_AUTOCONF" = "no" ]; then
+                ipv6_global_auto=0
+            else
+                ipv6_global_auto=1
+            fi
+        fi
+
+        if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then
+            # Reset IPv6 sysctl switches for "all", "default" and still existing devices
+            for i in /proc/sys/net/ipv6/conf/* ; do
+                interface=${i##*/}
+                sinterface=${interface/.//}
+                # Host/Router behaviour for the interface
+                /sbin/sysctl -e -w net.ipv6.conf.$sinterface.forwarding=$ipv6_global_forwarding >/dev/null 2>&1
+
+                # Autoconfiguration and redirect handling for Hosts
+                /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_ra=$ipv6_global_auto >/dev/null 2>&1
+                /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_redirects=$ipv6_global_auto >/dev/null 2>&1
+            done
+        fi
+        ;;
+
+    post)
+        # IPv6 test, module loaded, exit if system is not IPv6-ready
+        ipv6_test || exit 1
+
+        if [ "$IPV6_AUTOTUNNEL" = "yes" ]; then
+            ipv6_enable_autotunnel
+            # autotunnel interface doesn't require a MTU setup
+        fi
+
+        ## Add some routes which should never appear on the wire
+        # Unreachable IPv4-only addresses, normally blocked by source address selection
+        /sbin/ip route add unreach    ::ffff:0.0.0.0/96
+        # Unreachable IPv4-mapped addresses
+        /sbin/ip route add unreach    ::0.0.0.0/96
+        # Unreachable 6to4: IPv4 multicast, reserved, limited broadcast
+        /sbin/ip route add unreach    2002:e000::/19
+        # Unreachable 6to4: IPv4 loopback
+        /sbin/ip route add unreach    2002:7f00::/24
+        # Unreachable 6to4: IPv4 private (RFC 1918)
+        /sbin/ip route add unreach    2002:0a00::/24
+        /sbin/ip route add unreach    2002:ac10::/28
+        /sbin/ip route add unreach    2002:c0a8::/32
+        # Unreachable 6to4: IPv4 private (APIPA / DHCP link-local)
+        /sbin/ip route add unreach    2002:a9fe::/32
+        # Unreachable IPv6: 6bone test addresses
+        /sbin/ip route add unreach    3ffe:ffff::/32
+
+        # Set default route for autotunnel, if specified
+        if [ "$IPV6_DEFAULTDEV" = "sit0" -a "$IPV6_AUTOTUNNEL" = "yes" ]; then
+            if [ -n "$IPV6_DEFAULTGW" ]; then
+                ipv6_set_default_route $IPV6_DEFAULTGW $IPV6_DEFAULTDEV sit0
+            elif [ -n "$IPV6_DEFAULTDEV" ]; then
+                ipv6_set_default_route "" $IPV6_DEFAULTDEV sit0
+            fi
+        fi
+        ;;
+
+    *)
+        echo "Usage: $0 $1 {pre|post}"
+        ;;
+
+    esac
+    ;;
+
+stop)
+    case $POSITION in
+    pre)
+        ;;
+
+    post)
+        # IPv6 test, no module loaded, exit if system is not IPv6-ready
+        ipv6_test testonly || exit 0
+
+        if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then
+            for i in /proc/sys/net/ipv6/conf/* ; do
+                interface=${i##*/}
+                sinterface=${interface/.//}
+                # Assume Host behaviour
+                /sbin/sysctl -e -w net.ipv6.conf.$sinterface.forwarding=0 >/dev/null 2>&1
+
+                # Disable autoconfiguration and redirects
+                /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_ra=0 >/dev/null 2>&1
+                /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_redirects=0 >/dev/null 2>&1
+            done
+        fi
+
+        # Cleanup still existing tunnel devices
+        ipv6_cleanup_tunnel_devices
+
+        # Shut down generic tunnel interface now
+        if ipv6_test_device_status sit0 ; then
+            /sbin/ip link set sit0 down
+        fi
+        ;;
+
+    *)
+        echo "Usage: $0 $1 {pre|post}"
+        ;;
+
+    esac
+    ;;
+
+*)
+    echo $"Usage: $0 {start|stop|reload|restart|showsysctl}"
+    exit 1
+    ;;
+esac

sysconfig/network-scripts/network-functions

@@ -0,0 +1,729 @@
+# -*-Shell-script-*-
+#
+# This file is not a stand-alone shell script; it provides functions 
+# to network scripts that source it.
+
+# Set up a default search path.
+PATH="/sbin:/usr/sbin:/bin:/usr/bin"
+export PATH
+
+# We need to initialize the $HOSTNAME variable by ourselves now:
+# (It was previously done for RHEL-6 branch, but got lost in time.)
+HOSTNAME="$(hostname)"
+
+[ -z "$__sed_discard_ignored_files" ] && . /etc/init.d/functions
+
+get_hwaddr ()
+{
+    if [ -f /sys/class/net/${1}/address ]; then
+        tr '[a-z]' '[A-Z]' < /sys/class/net/${1}/address
+    elif [ -d "/sys/class/net/${1}" ]; then
+        LC_ALL= LANG= ip -o link show ${1} 2>/dev/null | \
+            awk '{ print toupper(gensub(/.*link\/[^ ]* ([[:alnum:]:]*).*/,
+                                        "\\1", 1)); }'
+    fi
+}
+
+get_config_by_device ()
+{
+    LANG=C grep -l "^[[:space:]]*DEVICE=['\"]\?${1}['\"]\?\([[:space:]#]\|$\)" \
+        /etc/sysconfig/network-scripts/ifcfg-* \
+        | LC_ALL=C sed -e "$__sed_discard_ignored_files"
+}
+
+get_config_by_hwaddr ()
+{
+    LANG=C grep -il "^[[:space:]]*HWADDR=['\"]\?${1}['\"]\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-* \
+        | LC_ALL=C sed -e "$__sed_discard_ignored_files"
+}
+
+get_config_by_subchannel ()
+{
+    LANG=C grep -E -i -l \
+        "^[[:space:]]*SUBCHANNELS=['\"]?([0-9]\.[0-9]\.[a-f0-9]+,){0,2}${1}(,[0-9]\.[0-9]\.[a-f0-9]+){0,2}['\"]?([[:space:]]+#|[[:space:]]*$)" \
+        /etc/sysconfig/network-scripts/ifcfg-* \
+        | LC_ALL=C sed -e "$__sed_discard_ignored_files"
+}
+
+get_config_by_name ()
+{
+    LANG=C grep -E -i -l "^[[:space:]]*NAME=\"(Auto |System )?${1}\"" \
+        /etc/sysconfig/network-scripts/ifcfg-* \
+        | LC_ALL=C sed -e "$__sed_discard_ignored_files"
+}
+
+get_device_by_hwaddr ()
+{
+    LANG=C ip -o link | awk -F ': ' -vIGNORECASE=1 '!/link\/ieee802\.11/ && /'"$1"'/ { print $2 }'
+}
+
+get_uuid_by_config ()
+{
+    dbus-send --system --print-reply --dest=com.redhat.ifcfgrh1 /com/redhat/ifcfgrh1 com.redhat.ifcfgrh1.GetIfcfgDetails string:"/etc/sysconfig/network-scripts/$1" 2>/dev/null | awk -F '"' '/string / { print $2 }'
+}
+
+generate_lease_file_name ()
+{
+    local ver=$1
+    LEASEFILE="/var/lib/dhclient/dhclient$ver-${DEVICE}.leases"
+    if [ -f $LEASEFILE ]; then
+         return
+    fi
+    LEASEFILE="/var/lib/dhclient/dhclient$ver-${UUID}-${DEVICE}.lease"
+}
+
+generate_config_file_name ()
+{
+    local ver=$1
+    if [ -s /etc/dhcp/dhclient$ver-${DEVICE}.conf ]; then
+        DHCLIENTCONF="-cf /etc/dhcp/dhclient$ver-${DEVICE}.conf";
+    elif [ -s /etc/dhclient$ver-${DEVICE}.conf ]; then
+        DHCLIENTCONF="-cf /etc/dhclient$ver-${DEVICE}.conf";
+    else
+        DHCLIENTCONF='';
+    fi
+}
+
+need_config ()
+{
+    local nconfig
+
+    CONFIG="ifcfg-${1}"
+    [ -f "${CONFIG}" ] && return
+    CONFIG="${1##*/}"
+    [ -f "${CONFIG}" ] && return
+    nconfig=$(get_config_by_name "${1}")
+    if [ -n "$nconfig" ] && [ -f "$nconfig" ]; then
+        CONFIG=${nconfig##*/}
+        return
+    fi
+    local addr=$(get_hwaddr ${1})
+    if [ -n "$addr" ]; then
+        nconfig=$(get_config_by_hwaddr ${addr})
+        if [ -n "$nconfig" ] ; then
+            CONFIG=${nconfig##*/}
+            [ -f "${CONFIG}" ] && return
+        fi
+    fi
+    nconfig=$(get_config_by_device ${1})
+    if [ -n "$nconfig" ] && [ -f "$nconfig" ]; then
+        CONFIG=${nconfig##*/}
+        return
+    fi
+}
+
+source_config ()
+{
+    CONFIG=${CONFIG##*/}
+    DEVNAME=${CONFIG##ifcfg-}
+    . /etc/sysconfig/network-scripts/$CONFIG
+    [ -r "keys-$DEVNAME" ] && . /etc/sysconfig/network-scripts/keys-$DEVNAME
+    case "$TYPE" in
+    Ethernet)
+        DEVICETYPE="eth"
+        ;;
+    CIPE)
+        DEVICETYPE="cipcb"
+        ;;
+    IPSEC)
+        DEVICETYPE="ipsec"
+        ;;
+    Modem)
+        DEVICETYPE="ppp"
+        ;;
+    xDSL)
+        DEVICETYPE="ppp"
+        ;;
+    ISDN)
+        DEVICETYPE="ippp"
+        ;;
+    Wireless)
+        DEVICETYPE="eth"
+        ;;
+    "Token Ring")
+        DEVICETYPE="eth"
+        ;;
+    CTC)
+        DEVICETYPE="ctc"
+        ;;
+    GRE | GRE6 | IPIP | IPIP6)
+        DEVICETYPE="tunnel"
+        ;;
+    SIT | sit)
+        DEVICETYPE="sit"
+        ;;
+    InfiniBand | infiniband)
+        DEVICETYPE="ib"
+        ;;
+    OVS*)
+        DEVICETYPE="ovs"
+        ;;
+    Bridge)
+        DEVICETYPE="eth"
+        ;;
+    esac
+    if [ -n "$HWADDR" ]; then
+        HWADDR=$(tr '[a-z]' '[A-Z]' <<<"$HWADDR")
+    fi
+    if [ -n "$MACADDR" ]; then
+        MACADDR=$(tr '[a-z]' '[A-Z]' <<<"$MACADDR")
+    fi
+    [ -z "$DEVICE" -a -n "$HWADDR" ] && DEVICE=$(get_device_by_hwaddr $HWADDR)
+    [ -z "$DEVICETYPE" ] && DEVICETYPE=$(echo ${DEVICE} | sed "s/[0-9]*$//")
+    [ -z "$REALDEVICE" -a -n "$PARENTDEVICE" ] && REALDEVICE=$PARENTDEVICE
+    [ -z "$REALDEVICE" ] && REALDEVICE=${DEVICE%%:*}
+    [ -z "$SYSCTLDEVICE" ] && SYSCTLDEVICE=${REALDEVICE/.//}
+    if [ "${DEVICE}" != "${REALDEVICE}" ]; then
+        ISALIAS=yes
+    else
+        ISALIAS=no
+    fi
+    if is_nm_running && [ "$REALDEVICE" != "lo" ] ; then
+        nm_con_load "$CONFIG"
+        if ! is_false $NM_CONTROLLED; then
+            UUID=$(get_uuid_by_config $CONFIG)
+            [ -n "$UUID" ] && _use_nm=true
+        fi
+    fi
+}
+
+nm_con_load () {
+    dbus-send --system --print-reply \
+        --dest=org.freedesktop.NetworkManager \
+        /org/freedesktop/NetworkManager/Settings \
+        org.freedesktop.NetworkManager.Settings.LoadConnections \
+        array:string:"/etc/sysconfig/network-scripts/${1}" >/dev/null 2>&1
+}
+
+ethtool_set()
+{
+    oldifs=$IFS;
+    IFS=';';
+    if [ -n "${ETHTOOL_DELAY}" ]; then
+      # Convert microseconds to seconds:
+      local ETHTOOL_DELAY_SEC=$(convert2sec ${ETHTOOL_DELAY} micro)
+      sleep ${ETHTOOL_DELAY_SEC}
+    fi
+    for opts in $ETHTOOL_OPTS ; do
+        IFS=$oldifs;
+        if [[ "${opts}" =~ [[:space:]]*- ]]; then
+            /sbin/ethtool $opts
+        else
+            /sbin/ethtool -s ${REALDEVICE} $opts
+        fi
+        IFS=';';
+    done
+    IFS=$oldifs;
+}
+
+expand_config ()
+{
+    local i=0 val
+    for idx in '' {0..255} ; do
+        ipaddr[$i]=$(eval echo '$'IPADDR$idx)
+        if [ -z "${ipaddr[$i]}" ]; then
+            [ "$idx" ] && [ $idx -ge 2 ] && break
+            continue
+        fi
+        prefix[$i]=$(eval echo '$'PREFIX$idx)
+        netmask[$i]=$(eval echo '$'NETMASK$idx)
+        broadcast[$i]=$(eval echo '$'BROADCAST$idx)
+        arpcheck[$i]=$(eval echo '$'ARPCHECK$idx)
+        arpupdate[$i]=$(eval echo '$'ARPUPDATE$idx)
+
+        if [ "${prefix[$i]}x" != "x" ]; then
+            val=$(/bin/ipcalc --netmask "${ipaddr[$i]}/${prefix[$i]}")
+            netmask[$i]=${val##NETMASK=}
+        fi
+
+        if [ "${netmask[$i]}x" = "x" ]; then
+            val=$(/bin/ipcalc --netmask "${ipaddr[$i]}")
+            netmask[$i]=${val##NETMASK=}
+        fi
+
+        if [ "${prefix[$i]}x" = "x" ]; then
+            val=$(/bin/ipcalc --prefix ${ipaddr[$i]} ${netmask[$i]})
+            prefix[$i]=${val##PREFIX=}
+        fi
+
+        if [ "${broadcast[$i]}x" = "x" ]; then
+            val=$(/bin/ipcalc --broadcast ${ipaddr[$i]} ${netmask[$i]})
+            broadcast[$i]=${val##BROADCAST=}
+        fi
+
+        if [ "${arpcheck[$i]}x" != "x" ]; then
+            arpcheck[$i]=${arpcheck[$i]##ARPCHECK=}
+            arpcheck[$i]=${arpcheck[$i],,*}
+        fi
+
+        if [ "${arpupdate[$i]}x" != "x" ]; then
+            arpupdate[$i]=${arpupdate[$i]##ARPUPDATE=}
+            arpupdate[$i]=${arpupdate[$i],,*}
+        fi
+
+        i=$((i+1))
+    done
+
+    [ -n "$DHCP_HOSTNAME" ] && DHCP_HOSTNAME=${DHCP_HOSTNAME%%.*}
+
+    if [ -z "${NETWORK}" ]; then
+        eval $(/bin/ipcalc --network ${ipaddr[0]} ${netmask[0]})
+    fi
+}
+
+toggle_value ()
+{
+    if [ "$2" = "yes"    -o "$2" = "YES" ] ; then
+        echo "$1 on"
+    elif [ "$2" = "no"    -o "$2" = "NO" ] ; then
+        echo "$1 off"
+    else
+        echo ''
+    fi
+}
+
+is_nm_running ()
+{
+    dbus-send --system --print-reply \
+        --dest=org.freedesktop.DBus \
+        /org/freedesktop/DBus \
+        org.freedesktop.DBus.GetNameOwner \
+        string:"org.freedesktop.NetworkManager" >/dev/null 2>&1
+}
+
+is_nm_active ()
+{
+    LANG=C nmcli -t --fields device,state dev status 2>/dev/null | grep -q "^${1}:connected$"
+}
+
+is_nm_handling ()
+{
+    LANG=C nmcli -t --fields device,state dev status 2>/dev/null | grep -q "^\(${1}:connected\)\|\(${1}:connecting.*\)$"
+}
+
+is_nm_device_unmanaged ()
+{
+    LANG=C nmcli -t --fields GENERAL dev show "${1}" 2>/dev/null | awk -F ':' '/GENERAL.STATE/ { if ($2 == "unmanaged") exit 0 ; else exit 1; }'
+}
+
+# Sets $alias to the device module if $? != 0
+is_available ()
+{
+    [ -z "$1" ] && return 1
+
+    [ -d "/sys/class/net/$1" ] && return 0
+
+    [ -n "$BONDING_OPTS" ] && install_bonding_driver $1
+
+    alias=$(modprobe -c | awk \
+        'BEGIN { alias = ""; }
+        $1 == "alias" && $2 == "'"$1"'" { alias = $3; }
+        $1 == "install" { install[$2] = $3; }
+        END {
+            cmd = install[alias];
+            print alias;
+            if (alias == "" || alias == "off" || cmd == "/bin/true" || cmd == ":")
+                exit 1;
+            exit 0;
+        }
+    ')
+    [ $? -eq 0 ] || return 2
+
+    modprobe $1 > /dev/null 2>&1 || {
+        return 1
+    }
+    if [ -n "$HWADDR" ]; then
+        local curdev=$(get_device_by_hwaddr "$HWADDR")
+        if [ -z "$curdev" ]; then
+            return 1
+        fi
+    fi
+
+    if [ ${alias} = "bonding" ]; then
+        install_bonding_driver $1
+    fi
+
+    [ -d "/sys/class/net/$1" ] && return 0 || return 1
+}
+
+is_available_wait ()
+{
+    [ -z "$1" ] && return 1
+
+    local retry=${2##*[!0-9]*}
+
+    is_available $1 && return 0
+    ret=$?
+
+    while [ 0"$retry" -gt 0 ]; do
+        sleep 1
+        [ -d "/sys/class/net/$1" ] && return 0
+        retry=$(($retry -1))
+    done
+
+    return $ret
+}
+
+is_hostname_set ()
+{
+    case "${HOSTNAME}" in
+        '(none)' | 'localhost' | 'localhost.localdomain')
+            # Hostname NOT set:
+            return 1
+            ;;
+        *)
+            # Hostname IS set:
+            return 0
+            ;;
+    esac
+}
+
+need_hostname ()
+{
+    # Should we avoid obtaining hostname from DHCP? (user override)
+    is_true "${NO_DHCP_HOSTNAME}" && return 1
+
+    if is_hostname_set; then
+        # Hostname is already set, we do not need to acquire it:
+        return 1
+    else
+        # Hostname is NOT set, we need to acquire it:
+        return 0
+    fi
+}
+
+set_hostname_options ()
+{
+    # User explicitly requires to *not* send DHCP_HOSTNAME, DHCP_FQDN or HOSTNAME:
+    is_false "${DHCP_SEND_HOSTNAME}" && return
+
+    if [[ -n "${DHCP_HOSTNAME}" && -n "${DHCP_FQDN}" ]]; then
+        net_log $"Both 'DHCP_HOSTNAME=${DHCP_HOSTNAME}' and 'DHCP_FQDN=${DHCP_FQDN}' are configured... Using DHCP_FQDN." warning
+    fi
+
+    local hostname_options=''
+
+    # DHCP_FQDN takes precedence before DHCP_HOSTNAME -- as it does in NetworkManager,
+    # and DHCP_HOSTNAME takes precedence before HOSTNAME:
+    if [[ -n "${DHCP_FQDN}" ]]; then
+        hostname_options="-F ${DHCP_FQDN}"
+    elif [[ -n "${DHCP_HOSTNAME}" ]]; then
+        hostname_options="-H ${DHCP_HOSTNAME}"
+    elif is_hostname_set; then
+        # We need to truncate the hostname in case it is the FQDN:
+        hostname_options="-H ${HOSTNAME%%.*}"
+    else
+        # Nothing to send to the DHCP server:
+        # ['(none)', 'localhost' or 'localhost.localdomain' are not valid]
+        return
+    fi
+
+    # Append the hostname options to the content of passed variable name:
+    eval "$1='${!1} ${hostname_options}'"
+
+    return
+}
+
+set_hostname ()
+{
+    hostname $1
+    if ! grep search /etc/resolv.conf >/dev/null 2>&1; then
+        domain=$(echo $1 | sed 's/^[^\.]*\.//')
+        if [ -n "$domain" ]; then
+            rsctmp=$(mktemp /tmp/XXXXXX);
+            cat /etc/resolv.conf > $rsctmp
+            echo "search $domain" >> $rsctmp
+
+            # Backup resolv.conf only if it doesn't exist already:
+            ! [ -f /etc/resolv.conf.save ] && cp -af /etc/resolv.conf /etc/resolv.conf.save
+
+            change_resolv_conf $rsctmp
+            /bin/rm -f $rsctmp
+        fi    
+    fi
+}
+
+check_device_down ()
+{
+    [ ! -d /sys/class/net/$1 ] && return 0
+    if LC_ALL=C ip -o link show dev $1 2>/dev/null | grep -q ",UP" ; then
+        return 1
+    else
+        return 0
+    fi
+}
+
+check_link_down ()
+{
+    if ! LC_ALL=C ip link show dev $1 2>/dev/null| grep -q ",UP" ; then
+        ip link set dev $1 up >/dev/null 2>&1
+    fi
+    timeout=0
+    delay=10
+    [ -n "$LINKDELAY" ] && delay=$(($LINKDELAY * 2))
+    while [ $timeout -le $delay ]; do
+        [ "$(cat /sys/class/net/$REALDEVICE/carrier 2>/dev/null)" != "0" ] && return 1
+        sleep 0.5
+        timeout=$((timeout+1))
+    done
+    return 0
+}
+
+check_default_route ()
+{
+    LC_ALL=C ip route list match 0.0.0.0/0 | grep -q default
+}
+
+find_gateway_dev ()
+{
+    . /etc/sysconfig/network
+    if [ -n "${GATEWAY}" -a "${GATEWAY}" != "none" ] ; then
+        dev=$(LC_ALL=C /sbin/ip route get to "${GATEWAY}" 2>/dev/null | \
+        sed -n 's/.* dev \([[:alnum:]]*\) .*/\1/p')
+        if [ -n "$dev" ]; then
+            GATEWAYDEV="$dev"
+        fi
+    fi
+}
+
+# After the device $1 goes away, restore the standard default route; typically
+# used for ppp with DEFROUTE temporarily replacing the "standard" default
+# route.
+# FIXME: This function doesn't support some newer features (GATEWAY in ifcfg,
+# $WINDOW, $METRIC)
+add_default_route ()
+{
+    . /etc/sysconfig/network
+    check_default_route && return 0
+    find_gateway_dev
+    if [ "$GATEWAYDEV" != "" -a -n "${GATEWAY}" -a \
+             "${GATEWAY}" != "none" ]; then
+        if ! check_device_down $1; then
+            if [ "$GATEWAY" = "0.0.0.0" ]; then
+                /sbin/ip route add default dev ${GATEWAYDEV}
+            else
+                /sbin/ip route add default via ${GATEWAY}
+            fi
+        fi
+    elif [ -f /etc/default-routes ]; then
+        while read spec; do
+            /sbin/ip route add $spec
+        done < /etc/default-routes
+        rm -f /etc/default-routes
+    fi
+}
+
+is_wireless_device ()
+{
+    [ -x /usr/sbin/iw ] || return 1
+    LC_ALL=C /usr/sbin/iw dev $1 info > /dev/null 2>&1 && return 0
+    return 1
+}
+
+phy_wireless_device ()
+{
+    cat /sys/class/net/$1/phy80211/name
+}
+
+bond_master_exists ()
+{
+    local bond_name
+    [ -z "${1}" ] && return 1
+    [ ! -f /sys/class/net/bonding_masters ] && return 1
+
+    for bond_name in $(< /sys/class/net/bonding_masters); do
+        [ "${bond_name}" == "${1}" ] && return 0
+    done
+    return 1
+}
+
+install_bonding_driver ()
+{
+    local fn="install_bonding_driver"
+
+    if ! bond_master_exists ${1}; then
+        modprobe bonding || return 1
+        echo "+$1" > /sys/class/net/bonding_masters 2>/dev/null
+    fi
+    (
+        # Set config here
+        need_config "$1"
+        source_config
+        if [ -f /sys/class/net/${DEVICE}/bonding/slaves ] && [ $(wc -l < /sys/class/net/${DEVICE}/bonding/slaves) -eq 0 ]; then
+            /sbin/ip link set dev ${DEVICE} down
+
+            # parse options and put them to arrays
+            for arg in $BONDING_OPTS ; do
+                bopts_keys[${#bopts_keys[*]}]=${arg%%=*}
+                bopts_vals[${#bopts_vals[*]}]=${arg##*=}
+            done
+
+            # add the bits to setup driver parameters here
+            # first set mode, miimon
+            for (( idx=0; idx < ${#bopts_keys[*]}; idx++ )) ; do
+                key=${bopts_keys[$idx]}
+                value=${bopts_vals[$idx]}
+
+                if [ "${key}" = "mode" ] ; then
+                    echo "${value}" > /sys/class/net/${DEVICE}/bonding/$key || {
+                        net_log $"Failed to set value '$value' [mode] to ${DEVICE} bonding device" err $fn
+                    }
+                    bopts_keys[$idx]=""
+                fi
+                if [ "${key}" = "miimon" ] ; then
+                    echo "${value}" > /sys/class/net/${DEVICE}/bonding/$key || {
+                        net_log $"Failed to set value '$value' [miimon] to ${DEVICE} bonding device" err $fn
+                    }
+                    bopts_keys[$idx]=""
+                fi
+            done
+
+            # set all other remaining options
+            for (( idx=0; idx < ${#bopts_keys[*]}; idx++ )) ; do
+                key=${bopts_keys[$idx]}
+                value=${bopts_vals[$idx]}
+
+                # option already set; take next
+                [[ -z "$key" ]] && continue
+
+                if [ "${key}" = "arp_ip_target" -a "${value:0:1}" != "+" ]; then
+                    OLDIFS=$IFS;
+                    IFS=',';
+                    for arp_ip in $value; do
+                        if ! grep -q $arp_ip /sys/class/net/${DEVICE}/bonding/$key; then
+                            echo +$arp_ip > /sys/class/net/${DEVICE}/bonding/$key || {
+                                net_log $"Failed to set '$arp_ip' value [arp_ip_target] to ${DEVICE} bonding device" err $fn
+                            }
+                        fi
+                    done
+                    IFS=$OLDIFS;
+                elif [ "${key}" = "arp_ip_target" ]; then
+                    if ! grep -q ${value#+} /sys/class/net/${DEVICE}/bonding/$key; then
+                        echo "$value" > /sys/class/net/${DEVICE}/bonding/$key || {
+                            net_log $"Failed to set '$value' value [arp_ip_target] to ${DEVICE} bonding device" err $fn
+                        }
+                    fi
+                elif [ "${key}" != "primary" ]; then
+                    echo $value > /sys/class/net/${DEVICE}/bonding/$key || {
+                        net_log $"Failed to set '$value' value [$key] to ${DEVICE} bonding device" err $fn
+                    }
+                fi
+            done
+        fi
+    )
+    return 0
+}
+
+is_bonding_device ()
+{
+    [ -f "/sys/class/net/$1/bonding/slaves" ]
+}
+
+# Invoke this when /etc/resolv.conf has changed:
+change_resolv_conf ()
+{
+    s=$(/bin/grep '^[\ \       ]*option' /etc/resolv.conf 2>/dev/null)
+    if [ $# -gt 1 ]; then
+        if [ "x$s" != "x" ]; then
+            s="$s"$'\n'
+        fi
+        n_args=$#
+        while [ $n_args -gt 0 ]; do 
+            case "$s" in
+            *$1*)
+                shift
+                n_args=$(($n_args-1))
+                continue
+                ;;
+            esac
+            s="$s$1"
+            shift
+            if [ $# -gt 0 ]; then
+                s="$s"$'\n'
+            fi
+            n_args=$(($n_args-1))
+        done             
+    elif [ $# -eq 1 ]; then
+        if [ "x$s" != "x" ]; then
+            s="$s"$'\n'$(/bin/grep -vF "$s" $1)
+        else
+            s=$(cat $1)
+        fi
+    fi
+    (echo "$s" > /etc/resolv.conf) >/dev/null 2>&1;
+    r=$?
+    if [ $r -eq 0 ]; then
+        [ -x /sbin/restorecon ] && /sbin/restorecon /etc/resolv.conf >/dev/null 2>&1 # reset the correct context
+        /usr/bin/logger -p local7.notice -t "NET" -i "$0 : updated /etc/resolv.conf"
+        [ -e /run/nscd/socket ] && /usr/sbin/nscd -i hosts # invalidate cache
+    fi
+    return $r
+}
+
+# Logging function
+#
+# Usage: net_log <message> <err|warning|info> <optional file/function name>
+#
+# Default level is 'err'.
+
+net_log()
+{
+    local message="$1"
+    local level="$2"
+    local name="$3"
+
+    [ -z "$message" ] && return 1
+    [ -z "$level" ] && level=err
+    [ -z "$name" ] && name=$0
+
+    case $level in
+    'debug')
+        local txt_level=$"DEBUG     "
+        ;;
+    'err')
+        local txt_level=$"ERROR     "
+        ;;
+    'warning')
+        local txt_level=$"WARN      "
+        ;;
+    'info')
+        local txt_level=$"INFO      "
+        ;;
+    esac
+
+    echo "$txt_level: [$name] $message"
+
+    if [ -x /usr/bin/logger ]; then
+        /usr/bin/logger -p daemon.$level -t "$name" "$message"
+    fi
+    return 0
+}
+
+update_DNS_entries()
+{
+    # Remove duplicate values from DNS options if any:
+    if [ -n "${DNS3}" ] && [[ "${DNS3}" == "${DNS2}" || "${DNS3}" == "${DNS1}" ]]; then
+        unset DNS3
+    fi
+
+    if [ -n "${DNS2}" ] && [[ "${DNS2}" == "${DNS1}" ]]; then
+        unset DNS2
+    fi
+
+    # Shift the DNS options if necessary:
+    if [ -z "${DNS1}" ] && [ -n "${DNS2}" ]; then
+        DNS1="${DNS2}"
+        unset DNS2
+    fi
+
+    if [ -z "${DNS2}" ] && [ -n "${DNS3}" ]; then
+        DNS2="${DNS3}"
+        unset DNS3
+    fi
+
+    # We need to check DNS1 again in case only DNS3 was set at all:
+    if [ -z "${DNS1}" ] && [ -n "${DNS2}" ]; then
+        DNS1="${DNS2}"
+        unset DNS2
+    fi
+}

sysconfig/network-scripts/route-eth0

@@ -0,0 +1 @@
+default via 192.168.1.1 dev eth0